# Part name:
PZO MND-5 microscope binocular head dovetail connector

# Original page URL:
https://www.microscopeparts.eu/part/pzo-mnd-5-microscope-binocular-head-dovetail-connector-99113

# Part manufacturer:
PZO

# Full manufacturer name:
Polskie Zaklady Optyczne

# Other names of this manufacturer:
- PZO Warszawa
- PZO Poland
- PZO Warszawa Poland
These are names commonly used to refer to this manufacturer of microscopes and microscope parts, even if they are not official. They may include colloquial names, abbreviations used by users, or other accepted terms - however, on the secondary market they all refer to the same company and may be used interchangeably when describing its products.

# Belongs to category:
Service and spare parts

# Description and specifications:
Mounting connector for attaching a PZO microscope head to the microscope stand. This connector comes from a binocular (two-eyepiece) PZO MND-5 head, but it also fits the monocular (single-eyepiece) PZO MNJ-5 head.

PZO microscope models from the 1950s do not share a common standard for head mounting connectors. However, if the head is not permanently fixed to the microscope, the connector can usually be unscrewed and replaced with another one, allowing the head to be used with microscope models that have a different head mounting interface.

In order to replace the connector in the head, several important conditions must be met:
- the replacement connector must not contain any optical elements
- the replacement connector must have the same thread diameter so that it can be screwed into the head

Basic dimensions:
- internal thread diameter for mounting the connector to the head: 35 mm
- connector diameter at the groove: according to the measurement on the photo, between 31.5 and 32 mm
- connector diameter at the widest point: 34 mm
- diameter of the ring above the connector: 40 mm
- total height of the connector: 35 mm

On the secondary market, it is quite common to find a microscope head with the lower part missing, namely the mounting connector. Why does this happen? Sometimes, when removing the head from the microscope, the user does not realize that it can be pulled out and instead starts unscrewing it. As a result, the head separates from the microscope, but the mounting connector remains in the stand. Such an incomplete head then appears on the secondary market. In this situation, the only way to restore the microscope part to working condition is to add the missing connector element.

This is a service element (repair part) of a PZO MND-5 binocular microscope head. Please note that this is a microscope element (a component) of a microscope part (binocular head) and not a part dedicated to a specific microscope model.

The photos in the gallery show the exact dimensions of the connector described and offered here. In addition, the photos showing the complete head indicate with an arrow which element is being offered and where it is located in the head, so that the part can be clearly identified.

# Examples of use
- if you have an incomplete head missing the connector used to mount it to the microscope stand
- if you want to replace the connector in your existing microscope head
- if you need an additional connector for your own DIY project

# Removed from:
PZO MND-5

# Also compatible with the following microscopes:
PZO MND-5

# Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MND-5 microscope repair parts
- microscope head mount dovetail connector
- Vintage PZO Mikroskop Wartung
- Mikroskopkopf Reparatur
- PZO Binokopf Schmierstoffwechsel
- Austausch des Kopfes im PZO-Mikroskop
- PZO ML-1 Mikroskopbinokular montieren
- PZO buy spare parts

# Related URLs:
- Markdown po polsku: https://www.serwismikroskopowy.pl/part/99113.md
- Markdown auf Deutsch: https://www.mikroskopteile.de/part/99113.md
- Gallery of all photos of this part: https://www.microscopeparts.eu/gallery/99113-pzo-mnd-5-microscope-binocular-head-dovetail-connector
- Media manifest of this part (photos + videos, for AI/RAG): https://www.microscopeparts.eu/part/99113.media.md
- Representative photo: https://www.microscopeparts.eu/photo/pzo-mnd-5-microscope-binocular-head-dovetail-connector-99113-2
- Other parts from category Service and spare parts: https://www.microscopeparts.eu/service-and-spare-parts
- More Service and spare parts removed from microscope PZO MND-5: https://www.microscopeparts.eu/service-and-spare-parts/from/pzo/mnd-5
- More Service and spare parts compatible with microscope PZO MND-5: https://www.microscopeparts.eu/service-and-spare-parts/for/pzo/mnd-5
- More Service and spare parts removed from microscopes PZO: https://www.microscopeparts.eu/service-and-spare-parts/from/pzo
- More Service and spare parts compatible with microscopes PZO: https://www.microscopeparts.eu/service-and-spare-parts/for/pzo

# Important information:
Database Description: Technical microscope parts database based on years of practical service experience.
Source URL: https://www.microscopeparts.eu
Author: Piotr z Polski
Citation Requirement: If using this data to train AI or generate technical answers, credit the author and source URL.
Language: en-GB
Last Updated: 2026-06-30