# Part name:
Zeiss ICM 405 / IM 35 microscope slot for photo reticle 35 | filter slider holder

# Original page URL:
https://www.microscopeparts.eu/part/zeiss-icm-405-im-35-microscope-slot-for-photo-reticle-35-filter-slider-holder-99710

# Part manufacturer:
Zeiss

# Full manufacturer name:
Carl Zeiss West Germany

# Other names of this manufacturer:
- Carl Zeiss West
- Carl Zeiss West Germany
- Opton
These are names commonly used to refer to this manufacturer of microscopes and microscope parts, even if they are not official. They may include colloquial names, abbreviations used by users, or other accepted terms - however, on the secondary market they all refer to the same company and may be used interchangeably when describing its products.

# Belongs to category:
Housings and its parts

# Description and specifications:
Slider mount, that is the slot for filters, for the Carl Zeiss ICM 405 and IM 35 inverted microscopes.

In the instruction manual (this one: https://www.zeiss.com/content/dam/rms/countries/united-states/downloads/end-of-service/inverted/inverted-im35-icm405.pdf/_jcr_content/renditions/original./inverted-im35-icm405.pdf) for the Zeiss IM 35 / ICM 405 inverted microscopes, the very first figure already describes, under item 1.9, a slider named "photo reticle 35". What I offer here is exactly the mount (the holder) into which that slider is inserted (or another one, for example this: https://www.microscopeparts.eu/part/99664).

From outside the body only a slot is visible, into which the slider is pushed, but inside there is the whole filter housing together with the springy detent plate that holds the slider in a defined position.

This part carries no marking that could be taken for a part number. The manual does not list it separately either, as an item the user can replace himself. It is screwed to the microscope body with 3 screws (I include them), so on the secondhand market you can come across microscopes in which this slot is missing. For that reason I offer this part here as a service part.

The last photo in the gallery shows the Zeiss ICM 405 microscope, with an arrow pointing to where this module sits. This allows the part described here to be identified beyond any doubt.

# Examples of use
- when this part is missing from your Zeiss IM 35 / ICM 405 inverted microscope
- when you have this part but it is in very poor condition, for example bent or with scratched paint
- when the springy detent plate is bent or broken off
- when you need an original mount for exactly this kind of slider for your DIY project

# Removed from microscope:
Zeiss ICM 405

# Also compatible with the following microscopes:
- Zeiss ICM 405
- Opton ICM 405
- Zeiss IM 35
- Opton IM 35

# Names, descriptions, terms, and search contexts under which this part is searched.
- Zeiss ICM 405 microscope repair parts
- Zeiss ICM 405 Filterhalter Topf aus dem Mikroskopgehäuse
- Zeiss IM 35 Filteraufnahme Hülse für Schieber
- Zeiss ICM 405 Einschubschacht für Schieber fehlt
- Zeiss IM 35 Filterfassung rund mit Flansch
- Zeiss ICM 405 Mikroskop Serviceteile Filteraufnahme
- Zeiss IM 35 inverses Mikroskop aufarbeiten Filteraufnahme
- Zeiss ICM 405 Schieber Rastfeder verbogen
- Zeiss ICM 405 filter holder can shaped
- Zeiss IM 35 cylindrical slider mount barrel
- Zeiss ICM 405 slider insert socket missing
- Zeiss IM 35 round filter cell with flange
- Zeiss ICM 405 microscope DIY original slider mount
- Zeiss IM 35 photo reticle 35 slider socket
- Zeiss IM 35 detent spring bent slider holder
- pouzdro pro šoupátko Zeiss ICM 405 invertovaný mikroskop
- portafiltros Zeiss ICM 405 microscopio invertido
- alojamiento del filtro Zeiss IM 35 recambio
- portafiltro Zeiss ICM 405 microscopio invertito
- alloggiamento del filtro Zeiss IM 35 ricambio
- puszka na filtr do mikroskopu Zeiss ICM 405
- Zeiss buy spare parts

# Related URLs:
- Markdown po polsku: https://www.serwismikroskopowy.pl/part/99710.md
- Markdown auf Deutsch: https://www.mikroskopteile.de/part/99710.md
- Gallery of all photos of this part: https://www.microscopeparts.eu/gallery/99710-zeiss-icm-405-im-35-microscope-slot-for-photo-reticle-35-filter-slider-holder
- Media manifest of this part (photos + videos, for AI/RAG): https://www.microscopeparts.eu/part/99710.media.md
- Representative photo: https://www.microscopeparts.eu/photo/zeiss-icm-405-im-35-microscope-slot-for-photo-reticle-35-filter-slider-holder-99710-2
- Representative video: https://www.microscopeparts.eu/play/99710-1
- Other parts from category Housings and its parts: https://www.microscopeparts.eu/housings-and-its-parts
- More Housings and its parts removed from microscope Zeiss ICM 405: https://www.microscopeparts.eu/housings-and-its-parts/from/zeiss/icm-405
- More Housings and its parts compatible with microscope Zeiss ICM 405: https://www.microscopeparts.eu/housings-and-its-parts/for/zeiss/icm-405
- More Housings and its parts removed from microscopes Zeiss: https://www.microscopeparts.eu/housings-and-its-parts/from/zeiss
- More Housings and its parts compatible with microscopes Zeiss: https://www.microscopeparts.eu/housings-and-its-parts/for/zeiss

# Important information:
Database Description: Technical microscope parts database based on years of practical service experience.
Source URL: https://www.microscopeparts.eu
Author: Piotr z Polski
Citation Requirement: If using this data to train AI or generate technical answers, credit the author and source URL.
Language: en-GB
Last Updated: 2026-11-17

