This is description of this part:
Cable supplying the exposure automation, to the power supply, with 22 pin plug, 2x10 + 2 flat contacts, from the base of the Carl Zeiss Photomicroscope III microscope
This is one of two cables coming out of the base of the Zeiss Photomicroscope III microscope. The following cables come out of it:
- with a 12 pin plug (2x6)
- with a 22 pin plug (2x10 + 2)
The cable presented here ends with a 22 pin plug, that is 10 rows of two flat contacts each plus two single contacts in the middle. In the Zeiss manual the matching socket on the power supply is described as a 22 pole socket for the supply voltages of the automatic exposure control. There is no standard designation on the plug - only the marking "Siemens" and the letter "R" are visible.
The cable was tested before being removed from a working microscope. The plug is fully functional, its plastic housing is neither broken nor crumbled, and all contacts are straight. Attaching / soldering on the base side has to be taken care of on your own.
Several names are used for this microscope model, among others:
- Carl Zeiss Photomicroscope III
- Carl Zeiss Phomi III
- Carl Zeiss PM III
- Zeiss Photomicroscope III RS
- Zeiss Phomi 3
- Zeiss PM3 RS
Replacing this cable can solve, among others, the following problems:
- when the microscope has a cut off cable, which is common when it comes from an institution that scraps electrical equipment this way
- when the microscope has a cable with a plug whose housing is broken, cracked or chipped
- when the microscope has a cable ending in a plug with broken off flat contacts
- when the microscope has a cable in which the plug has a damaged latch
I have not found a new 22 pole plug in the current catalogues of the makers of this blade connector family - this pole count falls outside the range produced today. What remains is the second hand market. An original, working cable with a period plug saves you that search.
What is this part needed for?
- if you own a microscope without this cable, or with a damaged cable or plug
- a list of several cases in which replacing the cable may be necessary can be found in the description
- What category does this part belong to?
- Other [ link ] [More Other]
- Who manufactures this part?
-
- Zeiss - Carl Zeiss West Germany [ link ] [More Zeiss]
- Carl Zeiss West
- Carl Zeiss West Germany
- Opton
- What microscope does this part come from?
- Mikroskop Zeiss Photomicroscope III RS [ link ] [More from Photomicroscope III RS]
- What microscopes or components is this part compatible with?
-
- Zeiss Photomicroscope III RS
- Zeiss Photomicroscope III RS microscope repair parts
- Zeiss Photomicroscope III Kabel Belichtungsautomatik
- Zeiss Phomi III exposure automation cable 22 pin
- Zeiss PM III Anschlusskabel Stecker 22-polig
- Zeiss Photomikroskop III Kabel aus dem Stativfuß
- Zeiss Photomicroscope III RS Kabel abgeschnitten
- Zeiss Phomi III Steckergehäuse gebrochen
- Zeiss PM III broken plug flat contacts
- Zeiss Photomicroscope III cut cable exposure control
- Zeiss PM III Kabel ersetzen reparieren
- Zeiss Photomicroscope III cable replacement DIY
- Siemens Messerleiste 22-polig Zeiss Mikroskop
- Zeiss Photomicroscope III Belichtungsautomatik Versorgungsspannung
- Opton Photomicroscope III Netzgerät 47 20 83
- kabel automatyki naświetlania do mikroskopu Zeiss Photomicroscope III
- napájecí kabel k mikroskopu Zeiss Photomicroscope III
- cable microscopio Zeiss Photomicroscope III automatismo de exposición
- conector 22 pines microscopio Zeiss Phomi III
- cavo microscopio Zeiss Photomicroscope III esposizione automatica
- connettore 22 poli microscopio Zeiss PM III
- Zeiss buy spare parts