This is description of this part:
Adapter from the circular microscope dovetail with 41 mm / 41.5 mm diameter (LOMO / Carl Zeiss Jena standard) to a female (internal) M42 thread.
This is one of the most popular adapters between a microscope and photographic equipment. The M42 thread lets you attach a practically unlimited number of further adapter rings for cameras and still cameras of virtually any manufacturer.
Basic parameters of this adapter ring:
Manufacturer: LOMO (ЛОМО)
Material: aluminium
Mount on the microscope side: male dovetail with 41 mm - 41.5 mm diameter
Mount on the other side: internal M42 thread. Note - I do not know whether it is M42x0.75 or M42x1 - but it seems to me that the thread pitch is 1 mm
Diameter of the whole ring: 52 mm
This is an original LOMO product, made in the middle of the 1970s. Even though in my opinion LOMO was never particularly good at thread precision, I consider such a converter to be far more durable than adapters made of plastic.
The dovetail mount standard with 41 / 41.5 mm diameter is found on microscopes from various manufacturers. This coupler can therefore be used on microscopes from makers including:
- Lomo
- Carl Zeiss Jena
- Meopta
- IOR
- Gamma
- some Reichert (e.g. Reichert Neozet)
- Will Wetzlar
- Hund Wetzlar
- Leitz Wetzlar
Importantly - when the adapter contains no optics inside (like the one offered here) - it can be used both on microscopes with a finite tube length (e.g. 160 mm / 170 mm) and on infinity-corrected ones. For Carl Zeiss Jena microscopes this means that the ring fits the CF-250 series (Jenamed / Jenaval and similar).
Some Olympus microscopes have a head mount with 42 mm diameter (e.g. the Olympus CH model) and this adapter also fits that microscope perfectly.
In the "compatibility" section I list the microscope models on which I personally confirmed that this adapter fits (as of November 2026) - but it is by no means a complete list.
What is this part needed for?
- if you need an adapter that, mounted in the microscope in place of the eyepiece head or in the photo port of a trinocular head, lets you connect any camera or still camera through the M42 thread