This is description of this part:
Canon Photomicro Unit F photo adapter for photomicrography on microscopes of any manufacturer.
This is an adapter that is fitted onto the eyepiece tube of monocular heads, bino heads or onto the tubes in trinocular heads.
Basic parameters of this adapter:
Manufacturer: Canon
Name: Canon Photomicro Unit F
Number in the manufacturer catalogue: Canon 4-26201-20
Material: metal
Connection on the microscope side: sleeve of 25 mm diameter, so it fits eyepiece tubes for microscope eyepieces with a 23.2 mm barrel diameter
Connection on the other side: Canon FD bayonet with a locking ring, the so-called Canon FD breech-lock
Image scale when used together with a microscope eyepiece: approx. 0.5x the eyepiece magnification
Image scale when used without an eyepiece, that is in the "direct projection" technique: depends on the total tube length
A short explanation regarding the image scale. The manufacturer writes in its catalogue (PDF available here: https://www.pacificrimcamera.com/rl/00674/00674.pdf): "approximately 0.5x that of the microscope eyepiece objective" and this is a hard parameter. However, when the microscope tube carrying this adapter has no eyepiece inserted, then on microscopes with objectives corrected for a finite tube length the image is projected as a cone, so the image scale depends on whether the correct distance is maintained when attaching the adapter.
Why does the adapter have a diameter of 25 mm while the text mentions eyepieces of 23.2 mm? A microscope eyepiece of 23.2 mm is inserted into a tube whose walls are usually sheet metal less than 1 mm thick (example of such a tube: https://www.microscopeparts.eu/part/99978). An adapter that slides onto the outside of the eyepiece tube must therefore have a larger mounting diameter than the eyepiece itself. Since different microscope manufacturers make their eyepiece tubes from sheet metal, castings or plastic of varying thickness, Canon solved this by supplying the adapter with a clamp sleeve with a locking screw (Clamp Ring) that offers sufficient tolerance.
The adapter offered here is complete and consists of the following parts:
- outer barrel with a breech-lock bayonet ring towards the camera (Canon calls it: Outer Hood Barrel)
- inner barrel seated inside the outer barrel (Canon calls it: Inner Barrel)
- light-shielding barrel inserted in place of the eyepiece (Canon calls it: Shade Barrel)
- clamp sleeve with a locking screw (Canon calls it: Clamp Ring)
The inside of both barrels is covered with a dense thread and finished in deep matt black. This is neither decoration, nor a machining mark, nor a working thread (which is why I give no diameter for it, since this thread is not used). Such a finish is meant to eliminate what is called flare, that is the reflections visible on photomicrographs.
Worth knowing: this adapter can also be mounted on eyepiece tubes or photo tubes of variable length. That allows a precise setting of parfocality. Here are some such tubes:
- https://www.microscopeparts.eu/part/99850 - LOMO / Carl Zeiss Jena tube 140-200 mm
- https://www.microscopeparts.eu/part/99573 - tube 150-190 mm from the Meopta polarising microscope
- https://www.microscopeparts.eu/part/00885 - vertical tube 150-200 mm of the rather old Progress M-9 microscope
Importantly - since this adapter contains no optics inside (just like the one offered here) - it can be used both on microscopes with a finite tube length (e.g. 160 mm / 170 mm) and on infinity corrected ones. In the case of Carl Zeiss Jena microscopes this means that it fits the CF-250 series (Jenamed / Jenaval / Jenatech and similar).
Please note: an adapter ring to another bayonet or thread (M42, Nikon etc.) can be mounted on the Canon FD bayonet sitting on this adapter - but that changes the total optical length and consequently the image scale of the whole module.
In the "compatibility" section I list some microscope models on which I have personally confirmed that this adapter fits (as of November 2026) - but this is by no means a complete list.
The last photo shows an example of use: a Lomo Erudit microscope with this very adapter mounted.
What is this part needed for?
- if you need an adapter that sits on the eyepiece tube or on the tube of a trinocular head and lets you connect a Canon camera or, through an optional adapter ring, another camera