This is description of this part:
Longitudinal guides and bearing balls, that is a repair part for the PZO SK14 microscope stage used in PZO Biolar microscopes and similar models.
Basic data of these guides:
Number of guides in the set: 2
Material: the guides are made of aluminium
Number of bearing balls: 13 per guide
Length of the guide: 114 mm
Width of the guide: 6 mm
Removed from: the mechanical stage PZO SK14
Which microscope this stage worked with: the PZO Biolar microscope
Important: these are longitudinal guides. They are responsible for moving the stage surface back and forth. They are not transverse guides for moving the specimen holder sideways - because the PZO SK14 stage, unlike many other stages, has NO transverse guides.
Please note: SK14 is a stage model made by the PZO company (SK = Stolik Krzyżowy, that is mechanical stage). The marking of this model (the marking "SK14") is on the stage. This stage was most often mounted on PZO Biolar microscopes, which carry no model name. As a result "SK14" is the only marking found on the microscope, and many people use the name "PZO SK14" - wrongly - for the whole microscope. This is a mistake: PZO SK14 is a stage model, not a microscope model.
The SK14 microscope stage these guides come from was mounted in a PZO Biolar B microscope. However, the same stage model was also used in other models of the Biolar microscope and in other microscopes made by this manufacturer, for example:
- PZO Biolar DIC
- PZO Biolar B2
- PZO Biolar GF
- PZO MB 30
- PZO Studar
This item is not a spare part for repairing a microscope. It is a component of the microscope stage - and the stage can be used with any compatible PZO microscope.
Detailed photos of these guides are available in the gallery. Every photo shows a scale with a millimetre division. The last photo shows the whole PZO SK14 microscope stage, with an arrow pointing at the component in question and at where it sits in the stage, so that this part can be identified without any doubt.
What is this part needed for?
- as a repair part, when you want to replace the whole damaged component
- if you have a microscope stage in which this component still works, but is in very poor condition
- if the bearing balls went missing during cleaning or repair
