This is description of this part:
Electric microscope illuminator model 96230-Y - transmitted light lamp mounted under the stage in place of the mirror, for Will Wetzlar V100 series microscopes.
Will Wetzlar V100 / V150 / V155 (Vm100 / Vm150 / Vm155) microscopes have no illumination built into the base. A base with integrated illumination appears only in the V200 and V300 series. In Will Wetzlar V100 microscopes the base can hold either a mirror or the add-on Will Wetzlar 96230-Y illuminator with a 15W bulb, which plugs straight into a 220-240V mains socket. This is exactly the illuminator offered here.
Key data of the Will Wetzlar 96230-Y microscope illuminator:
Mounting: vertical pin 6 mm in diameter (+/- 0.3 mm, as the pin has a central slot that lets it expand or be squeezed slightly)
Light source: replaceable 220-240V, 15W bulb with an E14 thread
Power cord: permanently attached
Filter: built-in blue filter with a ground glass diffuser. Here (https://www.microscopeparts.eu/part/92015) you can read more about what such a filter does
On and off switch: yes
Here: https://www.facebook.com/MikroskopyPZO/posts/pfbid02B8Leg6jugE1A5ZoLrGNjAMoF32AUT3m6Sv1REbkm9ArNstUcdG1e5DpUecawoh75l you will find a table comparing the Will Wetzlar V100 / V200 and V300 series microscopes.
Many microscope makers built functionally similar external lamps that mount under the stage in place of the mirror. It is a way of upgrading a microscope. Examples of similar illuminators are:
- LOMO OI-32M (ЛОМО ОИ-32М)
- PZO LM-2 and LM-3
- Hertel & Reuss Leuchte 2 "ANLA-fl"
- Zeiss Ansteckleuchte für Netzanschluß 46 70 00
- Leitz Wetzlar 220V 15W Mikro-Dialeuchte
The last photo in the gallery shows a complete Will Wetzlar V100 series microscope with this very illuminator fitted. The arrow points at the illuminator so that the item is unmistakable and you can see where it sits on the microscope.
In the video gallery you will also see how this microscope lamp is operated and how the bulb is changed.
Users call this item by various names. They all mean the same thing: an electric light source mounted under the microscope stage in place of the mirror. Among them are:
- electric substage illuminator
- electric sub-stage illuminator
- substage lamp
- substage microscope electrical lamp unit
- substage lighting unit
- tungsten illuminator
- microscope illuminator
- mirror replacement electric illuminator
- electric illuminator for mirror microscope
This electric illuminator can be used with practically any microscope, whatever the make. Before fitting it to a microscope from another manufacturer make sure:
- that the mirror can be pulled out of the microscope
- that the hole left by the microscope mirror takes a pin 6 mm in diameter
- that this hole sits in the base of the microscope under the stage. This matters, because in some microscopes the mirror is fitted at the bottom of the vertical arm (under the condenser, for example) and then the pin of the illuminator has to be horizontal - in this illuminator it is vertical. Interestingly, some makers (the Hertel & Reuss mentioned above, for one) make lamps with two pins so that they fit both mounting types. If you need such a lamp - just send me a message.
What is this part needed for?
- if you need an original electric illuminator made specifically for Will Wetzlar V100 series microscopes
- if you want to use this lamp on another microscope that currently has a mirror