This is description of this part:
Complete condenser holder assembly for Carl Zeiss microscopes.
This condenser holder assembly fits the following microscopes:
- Zeiss Photomicroscope (the so-called Zeiss Phomi)
- Zeiss Standard WL 89
- Zeiss Universal
- Zeiss Ultraphot (although the original holder in this model is black)
This complete module consists of the following parts:
- the section with the condenser focusing knob for height adjustment, mounted onto a dovetail guide using a quick-release clamping mechanism
- the condenser holder with a toothed rack, condenser retaining screw and two centering screws
- a swing-out holder for a 32 mm round filter
- a swing-out wide field lens used to provide even illumination of the specimen when observing with low-magnification objectives
This holder accepts condensers with a dovetail mount – it is not intended for condensers with a diameter of 37 mm or 39.5 mm.
The image gallery contains detailed photographs of this part together with its dimensions.
In the last photograph, an arrow indicates where this part is located inside the microscope.
Additionally, the video gallery contains two videos: the first presents this part from different angles, in close-up views, and demonstrates the movement of its moving components, while the second video shows, among other things, how to remove this condenser holder from the microscope body using a Zeiss Photomicroscope II as an example.
The Zeiss Universal, Zeiss Ultraphot, the earliest versions of the Zeiss Standard WL, and the first model of the Zeiss Photomicroscope were originally factory-equipped with this component in black.
The Zeiss Photomicroscope II, Zeiss Photomicroscope III, and the later versions of the Zeiss Standard WL were factory-equipped with this component in grey.
The colour of this component has no effect on compatibility. In other words, a component of either colour fits all of the microscope models listed above.
The component presented here is grey.
If you're looking for the gray version, it's listed in this database under number 99606.
What is this part needed for?
- if you have a microscope in which this holder is missing
- as a replacement part by replacing the entire damaged element
- if you have a microscope in which this element works but is of very poor quality, e.g. has bent or broken centering screws
- What category does this part belong to?
- Condenser holders (supports) [ link ] [More Condenser holders (supports)]
- Who manufactures this part?
-
- Zeiss - Carl Zeiss West Germany [ link ] [More Zeiss]
- Carl Zeiss West
- Carl Zeiss West Germany
- Opton
- What microscope does this part come from?
- Mikroskop Zeiss Standard WL [ link ] [More from Standard WL]
- What microscopes or components is this part compatible with?
-
- Zeiss Standard WL
- Zeiss Universal
- Zeiss Photomicroscope
- Zeiss Ultraphot
- Zeiss Photomicroscope II
- Zeiss Photomicroscope III RS
- Zeiss Standard WL microscope repair parts
- Zeiss Photomicroscope microscope condenser holder support service
- Zeiss Phomi Mikroskopkondensor-Halter reparieren
- Zeiss Standard WL Mikroskop-Kondensor Halterung neufetten
- Zeiss Universal Mikroskop Kondensor Zahnstange und Weitfeld-Linse
- Zeiss Universal microscope condenser support
- Zeiss Standard WL 89 condenser rack
- Zeiss Kondensor Zentrierschrauben und Filterhalter
- Zeiss buy spare parts