|
|
SERMIK_ID number under which this microscope part is placed in the database.
99834
|
Olympus 10 - DIC Prism for MSPlan 10x RMS Microscope Objective | BH2-NIC EPI Reflected Light Nomarski DIC
|
|
Description of this part for the microscope.
Nomarski interference contrast prism (NIC / Nomarski DIC) Olympus 10 for reflected light (EPI) work with Olympus MS Plan 10x objectives.
Basic technical
...
parameters of the prism:
Manufacturer: Olympus (Japan)
Marking: 10 Olympus
Serial number: 201738
Supported objective: Olympus MSPlan 10 0.30 ∞/- f=180 (manufacturer catalog number: 1-LM530)
Male thread: RMS
Female thread: RMS
Contrast method: Nomarski interference contrast (abbreviation: NIC)
Illumination: a compatible reflected light (EPI) illuminator is required
The prism is housed in a suitably shaped metal casing. On one side there is a male thread, on the other a female thread. Mechanically, the prism is screwed with its male thread into the objective nosepiece - and the Olympus MSPlan 10 0.30 ∞/- f=180 objective is screwed into its female thread.
This prism is essential for reflected light observation using the DIC technique. With this technique, details of the observed surface appear three-dimensional and raised, revealing details that remain invisible in classic reflected light brightfield.
Names, descriptions, terms, and search contexts under which this part is searched.
- Olympus BH-2 BHS microscope repair parts
- Olympus MSPlan 10x DIC prism Europe
- Olympus MS Plan 10 Nomarski prism RMS
- Olympus 1-LM530 MSPlan 10 DIC prism
- Olympus BH-2 BHM Nomarski prism 10x
- Olympus BHT BHS epi DIC prism 10x
- Olympus BH BHA Nomarski prism reflected light
- Olympus BH2-UMA DIC prism MSPlan 10x
- Olympus BH2-UMA Nomarski Prisma 10x
- Olympus Auflicht DIC Prisma MSPlan 10
- Olympus Interferenzkontrast Prisma MS Plan 10x
- Olympus NIC Prisma BH-2 Versand aus Europa
- Olympus DIC prism delaminated replacement
- Olympus Nomarski prism 10x cracked
- Olympus DIC Prisma 10x delaminiert Ersatz
- Olympus Nomarski Prisma MSPlan gesprungen
- DIC hranol Olympus MSPlan 10
- prisma Nomarski Olympus MSPlan 10x Europa
- prisma DIC Olympus BH-2 luz reflejada
- prisma Nomarski Olympus BHM MS Plan 10x
- prisma DIC Olympus BH2 luce riflessa
- pryzmat Nomarskiego Olympus MSPlan 10x
- Olympus buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
129 €
|
Name of the category to which this microscope part is classified.
Prisms
|
Abbreviated and full name of the manufacturer of this microscope part.
Olympus
Olympus Corporation Tokyo Japan
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
BH-2 BHS
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Olympus)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you own an Olympus microscope with a compatible reflected light (EPI) illuminator and the only thing missing for a complete DIC / NIC system for the 10x objective is this particular prism
-
...
-
if you have such a prism but it is damaged, e.g. delaminated, cracked or scratched
-
if you like to be prepared and want to keep such a prism as a spare
-
if you do not have a complete Olympus DIC / NIC system yet but are building it piece by piece and this is one of the missing elements
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99835
|
Olympus 100 - DIC Prism for MSPlan 100x RMS Microscope Objective | BH2-NIC EPI Reflected Light Nomarski DIC
|
|
Description of this part for the microscope.
Nomarski interference contrast prism (NIC / Nomarski DIC) Olympus 100 for reflected light (EPI) work with Olympus MS Plan 100x objectives.
Basic technical
...
parameters of the prism:
Manufacturer: Olympus (Japan)
Marking: 100 Olympus
Serial number: 201532
Supported objective: Olympus MSPlan 100 0.95 ∞/0 f=180 (manufacturer catalog number: 1-LM544)
Male thread: RMS
Female thread: RMS
Contrast method: Nomarski interference contrast (abbreviation: NIC)
Illumination: a compatible reflected light (EPI) illuminator is required
The prism is housed in a suitably shaped metal casing. On one side there is a male thread, on the other a female thread. Mechanically, the prism is screwed with its male thread into the objective nosepiece - and the Olympus MSPlan 100 0.95 ∞/0 f=180 objective is screwed into its female thread.
This prism is essential for reflected light observation using the DIC technique. With this technique, details of the observed surface appear three-dimensional and raised, revealing details that remain invisible in classic reflected light brightfield.
Names, descriptions, terms, and search contexts under which this part is searched.
- Olympus BH-2 BHS microscope repair parts
- Olympus MSPlan 100x DIC prism Europe
- Olympus MS Plan 100 Nomarski prism RMS
- Olympus 1-LM544 MSPlan 100 DIC prism
- Olympus BH-2 BHM Nomarski prism 100x
- Olympus BHT BHS epi DIC prism 100x
- Olympus BH BHA Nomarski prism reflected light
- Olympus BH2-UMA DIC prism MSPlan 100x
- Olympus BH2-UMA Nomarski Prisma 100x
- Olympus Auflicht DIC Prisma MSPlan 100
- Olympus Interferenzkontrast Prisma MS Plan 100x
- Olympus NIC Prisma BH-2 Versand aus Europa
- Olympus DIC prism delaminated replacement
- Olympus Nomarski prism 100x cracked
- Olympus DIC Prisma 100x delaminiert Ersatz
- Olympus Nomarski Prisma MSPlan gesprungen
- DIC hranol Olympus MSPlan 100
- prisma Nomarski Olympus MSPlan 100x Europa
- prisma DIC Olympus BH-2 luz reflejada
- prisma Nomarski Olympus BHM MS Plan 100x
- prisma DIC Olympus BH2 luce riflessa
- pryzmat Nomarskiego Olympus MSPlan 100x
- Olympus buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
199 €
|
Name of the category to which this microscope part is classified.
Prisms
|
Abbreviated and full name of the manufacturer of this microscope part.
Olympus
Olympus Corporation Tokyo Japan
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
BH-2 BHS
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Olympus)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you own an Olympus microscope with a compatible reflected light (EPI) illuminator and the only thing missing for a complete DIC / NIC system for the 100x objective is this particular prism
-
...
-
if you have such a prism but it is damaged, e.g. delaminated, cracked or scratched
-
if you like to be prepared and want to keep such a prism as a spare
-
if you do not have a complete Olympus DIC / NIC system yet but are building it piece by piece and this is one of the missing elements
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99836
|
Olympus Neo 5 - DIC Prism for NeoSPlan 5x M26 Microscope Objective | BH2-NIC EPI Reflected Light Nomarski DIC
|
|
Description of this part for the microscope.
Nomarski interference contrast prism (NIC / Nomarski DIC) Olympus Neo5 for reflected light (EPI) work with Olympus NeoSPlan 5x objectives.
Basic technical
...
parameters of the prism:
Manufacturer: Olympus (Japan)
Marking: Neo 5 Olympus
Serial number: 200412
Supported objective: Olympus NeoSPlan 5 0.13 ∞/- f=180 (manufacturer catalog number: 1-LM420) and NeoSPlan 5 NIC 0.13 ∞/- f=180 (manufacturer catalog number: 1-LM424)
Male thread: M26
Female thread: M26
Contrast method: Nomarski interference contrast (abbreviation: NIC)
Illumination: a compatible reflected light (EPI) illuminator is required
The prism is housed in a suitably shaped metal casing. On one side there is a male thread, on the other a female thread. Mechanically, the prism is screwed with its male thread into the objective nosepiece - and the Olympus NeoSPlan 5 0.13 ∞/- f=180 objective is screwed into its female thread.
This prism is essential for reflected light observation using the DIC technique. With this technique, details of the observed surface appear three-dimensional and raised, revealing details that remain invisible in classic reflected light brightfield.
Names, descriptions, terms, and search contexts under which this part is searched.
- Olympus BH-2 BHS microscope repair parts
- Olympus NeoSPlan 5x DIC prism Europe
- Olympus Neo S Plan 5 Nomarski prism M26
- Olympus 1-LM420 NeoSPlan 5 DIC prism
- Olympus BH-2 BHM Nomarski prism 5x
- Olympus BHT BHS epi DIC prism 5x
- Olympus BH BHA Nomarski prism reflected light
- Olympus BH2-UMA DIC prism NeoSPlan 5x
- Olympus BH2-UMA Nomarski Prisma 5x
- Olympus Auflicht DIC Prisma NeoSPlan 5
- Olympus Interferenzkontrast Prisma Neo SPlan 5x 1-LM424
- Olympus NIC Prisma BH-2 Versand aus Europa
- Olympus DIC prism delaminated replacement
- Olympus Nomarski prism 5x cracked
- Olympus DIC Prisma 5x delaminiert Ersatz
- Olympus Nomarski Prisma NeoSPlan gesprungen
- DIC hranol Olympus NeoSPlan 5
- prisma Nomarski Olympus NeoSPlan 5x Europa
- prisma DIC Olympus BH-2 luz reflejada
- prisma Nomarski Olympus BHM Neo SPlan 5x
- prisma DIC Olympus BH2 luce riflessa
- pryzmat Nomarskiego Olympus NeoSPlan 5x
- Olympus buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
129 €
|
Name of the category to which this microscope part is classified.
Prisms
|
Abbreviated and full name of the manufacturer of this microscope part.
Olympus
Olympus Corporation Tokyo Japan
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
BH-2 BHS
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Olympus)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you own an Olympus microscope with a compatible reflected light (EPI) illuminator and the only thing missing for a complete DIC / NIC system for the 5x objective is this particular prism
-
...
-
if you have such a prism but it is damaged, e.g. delaminated, cracked or scratched
-
if you like to be prepared and want to keep such a prism as a spare
-
if you do not have a complete Olympus DIC / NIC system yet but are building it piece by piece and this is one of the missing elements
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99837
|
Olympus Neo10 DIC Prism NeoSPlan 10x Microscope Objective | BH2-NIC EPI Reflected Light Nomarski DIC
|
|
Description of this part for the microscope.
Nomarski interference contrast prism (NIC / Nomarski DIC) Olympus Neo10 for reflected light (EPI) work with Olympus NeoSPlan 10x objectives.
Basic technical
...
parameters of the prism:
Manufacturer: Olympus (Japan)
Marking: Neo 10 Olympus
Serial number: 200463
Supported objectives: Olympus NeoSPlan 10 0.30 ∞/0 f=180 (manufacturer catalog number: 1-LM430) and Olympus NeoSPlan 10 NIC 0.30 ∞/0 f=180 (manufacturer catalog number: 1-LM434)
Male thread: M26
Female thread: M26
Contrast method: Nomarski interference contrast (abbreviation: NIC)
Illumination: a compatible reflected light (EPI) illuminator is required
The prism is housed in a suitably shaped metal casing. On one side there is a male thread, on the other a female thread. Mechanically, the prism is screwed with its male thread into the objective nosepiece - and the Olympus Neo SPlan 10 0.30 ∞/0 f=180 objective is screwed into its female thread.
This prism is essential for reflected light observation using the DIC technique. With this technique, details of the observed surface appear three-dimensional and raised, revealing details that remain invisible in classic reflected light brightfield.
Names, descriptions, terms, and search contexts under which this part is searched.
- Olympus BH-2 BHS microscope repair parts
- Olympus NeoSPlan 10x DIC prism Europe
- Olympus Neo S Plan 10 Nomarski prism M26
- Olympus 1-LM430 NeoSPlan 10 DIC prism
- Olympus BH-2 BHM Nomarski prism 10x
- Olympus BHT BHS epi DIC prism 10x
- Olympus BH BHA Nomarski prism reflected light
- Olympus BH2-UMA DIC prism NeoSPlan 10x
- Olympus BH2-UMA Nomarski Prisma 10x
- Olympus Auflicht DIC Prisma NeoSPlan 10
- Olympus Interferenzkontrast Prisma Neo SPlan 10x 1-LM434
- Olympus NIC Prisma BH-2 Versand aus Europa
- Olympus DIC prism delaminated replacement
- Olympus Nomarski prism 10x cracked
- Olympus DIC Prisma 10x delaminiert Ersatz
- Olympus Nomarski Prisma NeoSPlan gesprungen
- DIC hranol Olympus NeoSPlan 10
- prisma Nomarski Olympus NeoSPlan 10x Europa
- prisma DIC Olympus BH-2 luz reflejada
- prisma Nomarski Olympus BHM Neo SPlan 10x
- prisma DIC Olympus BH2 luce riflessa
- pryzmat Nomarskiego Olympus NeoSPlan 10x
- Olympus buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
129 €
|
Name of the category to which this microscope part is classified.
Prisms
|
Abbreviated and full name of the manufacturer of this microscope part.
Olympus
Olympus Corporation Tokyo Japan
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
BH-2 BHS
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Olympus)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you own an Olympus microscope with a compatible reflected light (EPI) illuminator and the only thing missing for a complete DIC / NIC system for the 10x objective is this particular prism
-
...
-
if you have such a prism but it is damaged, e.g. delaminated, cracked or scratched
-
if you like to be prepared and want to keep such a prism as a spare
-
if you do not have a complete Olympus DIC / NIC system yet but are building it piece by piece and this is one of the missing elements
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99838
|
Olympus Neo20 DIC Prism NeoSPlan 20x Microscope Objective | BH2-NIC EPI Reflected Light Nomarski DIC
|
|
Description of this part for the microscope.
Nomarski interference contrast prism (NIC / Nomarski DIC) Olympus Neo20 for reflected light (EPI) work with Olympus NeoSPlan 20x objectives.
Basic technical
...
parameters of the prism:
Manufacturer: Olympus (Japan)
Marking: Neo 20 Olympus
Serial number: 200318
Supported objectives: Olympus NeoSPlan 20 0.46 ∞/0 f=180 (manufacturer catalog number: 1-LM440) and Olympus NeoSPlan 20 NIC 0.46 ∞/0 f=180 (manufacturer catalog number: 1-LM444)
Male thread: M26
Female thread: M26
Contrast method: Nomarski interference contrast (abbreviation: NIC)
Illumination: a compatible reflected light (EPI) illuminator is required
The prism is housed in a suitably shaped metal casing. On one side there is a male thread, on the other a female thread. Mechanically, the prism is screwed with its male thread into the objective nosepiece - and the Olympus Neo SPlan 20 0.46 ∞/0 f=180 objective is screwed into its female thread.
This prism is essential for reflected light observation using the DIC technique. With this technique, details of the observed surface appear three-dimensional and raised, revealing details that remain invisible in classic reflected light brightfield.
Names, descriptions, terms, and search contexts under which this part is searched.
- Olympus BH-2 BHS microscope repair parts
- Olympus NeoSPlan 20x DIC prism Europe
- Olympus Neo S Plan 20 Nomarski prism M26
- Olympus 1-LM440 NeoSPlan 20 DIC prism
- Olympus BH-2 BHM Nomarski prism 20x
- Olympus BHT BHS epi DIC prism 20x
- Olympus BH BHA Nomarski prism reflected light
- Olympus BH2-UMA DIC prism NeoSPlan 20x
- Olympus BH2-UMA Nomarski Prisma 20x
- Olympus Auflicht DIC Prisma NeoSPlan 20
- Olympus Interferenzkontrast Prisma Neo SPlan 20x 1-LM444
- Olympus NIC Prisma BH-2 Versand aus Europa
- Olympus DIC prism delaminated replacement
- Olympus Nomarski prism 20x cracked
- Olympus DIC Prisma 20x delaminiert Ersatz
- Olympus Nomarski Prisma NeoSPlan gesprungen
- DIC hranol Olympus NeoSPlan 20
- prisma Nomarski Olympus NeoSPlan 20x Europa
- prisma DIC Olympus BH-2 luz reflejada
- prisma Nomarski Olympus BHM Neo SPlan 20x
- prisma DIC Olympus BH2 luce riflessa
- pryzmat Nomarskiego Olympus NeoSPlan 20x
- Olympus buy spare parts
|
The number of pieces of this microscope part that we have to offer.
0
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
149 €
|
Name of the category to which this microscope part is classified.
Prisms
|
Abbreviated and full name of the manufacturer of this microscope part.
Olympus
Olympus Corporation Tokyo Japan
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
BH-2 BHS
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Olympus)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you own an Olympus microscope with a compatible reflected light (EPI) illuminator and the only thing missing for a complete DIC / NIC system for the 20x objective is this particular prism
-
...
-
if you have such a prism but it is damaged, e.g. delaminated, cracked or scratched
-
if you like to be prepared and want to keep such a prism as a spare
-
if you do not have a complete Olympus DIC / NIC system yet but are building it piece by piece and this is one of the missing elements
|
|
