Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

eyepieces can be used with microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.

Description of this part for the microscope.

microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.

Description of this part for the microscope.

of view number: 12
Mounting diameter: 23.2 mm
Designation: PK = plan compensating - recommended for work with planachromatic objectives, but they also work without any trouble with achromats or apochromats

Because of their very high quality they are often used on microscopes from other manufacturers as well, especially when Carl Zeiss Jena Planachromat objectives are mounted in them. The "compatibility" section lists a long series of microscopes these eyepieces fit - but that list is definitely not complete.

Important: these eyepieces work both on microscopes with a finite tube length (160 mm, for example) and on microscopes with infinity optics. That means you can use them on the Carl Zeiss Jena Amplival microscope just as well as on the Carl Zeiss Jena NU-2 microscope.

A note - eyepieces with such a strong magnification are in my opinion better suited to a quick look than to permanent work. I write "in my opinion" on purpose, because this comes from using them and not from the manufacturer's description.
A 16x eyepiece magnification should be treated as a zoom that brings out no additional detail (the resolution is not increased). This matters for example with heads that have their own extra magnification (such as Carl Zeiss Jena heads with a built-in 1.5x or 1.6x factor) - working with a 100x oil immersion objective you then theoretically get 100*1.5*16 = 2400x, while physics does not allow light from the visible range to be usefully magnified for the human eye beyond roughly 1250x - so this is what is called empty magnification.

Description of this part for the microscope.

5x
Field of view number: 16
Mounting diameter: 23.2 mm
Designation: PK = plan compensating - recommended for work with planachromatic objectives, but they also work without any trouble with achromats or apochromats

Because of their very high quality they are often used on microscopes from other manufacturers as well, especially when Carl Zeiss Jena Planachromat objectives are mounted in them. The "compatibility" section lists a long series of microscopes these eyepieces fit - but that list is definitely not complete.

Important: these eyepieces work both on microscopes with a finite tube length (160 mm, for example) and on microscopes with infinity optics. That means you can use them on the Carl Zeiss Jena Amplival microscope just as well as on the Carl Zeiss Jena NU-2 microscope.

Description of this part for the microscope.

5x
Magnification: 2.5x
Mounting diameter: 23.2 mm

Please note: this is a "CF" projection photo eyepiece, meaning "Chrome Free" (chromatic aberration free). The eyepiece itself carries no chromatic correction - for correct results it has to sit in the microscope objective. In the case of Nikon, those are the CF (CFN) and CFI objectives.

The standard 23.2 mm mounting diameter allows it to be used in the projection tubes of many microscopes from various manufacturers - both biological and stereo ones.

It has to be said that this is a very universal projection eyepiece. In the "compatibility" section I list only a small part of the microscopes this photo eyepiece can be used with.

From the experience of people I know, only testing a projection eyepiece yourself on a specific microscope setup gives you certainty about how it will behave.

With every configuration - different objectives, a different tube length, a different photo adapter, camera, DSLR, sensor size - the user will get a different result.

This applies to tests both on microscopes with finite tube length optics (for example the Nikon Labophot with 160 mm optics) and infinity optics (for example the Nikon Eclipse E600 infinity), and both on older stereo microscopes (for example the Nikon SMZ-10) and somewhat newer ones such as the Nikon SMZ-1500.

Description of this part for the microscope.

5
Magnification: 5x
Field number F.N.: 25
Mounting diameter: 23.2 mm

Please note: PLI is a series of projection eyepieces assigned to the CFI60 system (optics corrected for infinity / "I" as in "infinity"). I have, however, personally seen eyepieces from this series used on microscopes with optics corrected for a finite tube length (160 mm, to be precise).

This eyepiece contains no chromatic correction lenses, so that correction has to be built into the objective (in the case of Nikon objectives these are the CF / CFN / CFI series).

The standard 23.2 mm mounting diameter allows it to be used in the projection tubes of many microscopes from various manufacturers - both biological and stereo ones. It therefore has to be regarded as a very universal projection eyepiece. In the "compatibility" section I list only a small part of the microscopes this photo eyepiece can be used with.

From the experience of people I know, only testing a projection eyepiece yourself on a specific microscope setup gives you certainty about how it will behave.

With every configuration - different objectives, a different tube length, a different photo adapter, camera, DSLR, sensor size - the user will get a different result.

This applies to tests both on microscopes with finite tube length optics (for example the Nikon Alphaphot with 160 mm optics) and infinity optics (for example the Nikon Eclipse TS-100 infinity), and both on older stereo microscopes (for example the Nikon SMZ-2T) and somewhat newer ones such as the Nikon SMZ-18.