Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

It's very likely that this knob system is also compatible with the Olympus BX51 model and perhaps others. Once I verify this, I'll post the relevant information here (ha, I wonder when?).

Description of this part for the microscope.

microscope stand and is not visible from the outside.

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

microscope. The shaft itself is located inside and is not visible from the outside.

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

From the outside only the "opening" into which this hex key is inserted is visible, while the entire sleeve (it can be described as a plastic tube acting as a protective cover / guide sleeve) is located inside. And this is exactly the element shown and offered here.

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

stand base) of the microscope (that is transmitted light). On the outside there is a lens that collimates the light and a place where filters are placed. The mirror is in excellent condition - however, in my opinion it is attached in an unusual way. Either the manufacturer used a large amount of adhesive to secure it properly - or somebody did this later during the years of use using a large amount of adhesive. Of course this has no effect on operation - operation is flawless - but I want to point this out.

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

metal plate which presses these filters against the microscope housing. It consists of a thin frosted filter and a thick filter which, in my opinion, performs light color correction and also absorbs heat from the halogen bulb.

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

Both elements (the diaphragm and the control ring) have gears which engage with each other after assembly and work together: rotating the control ring closes or opens the diaphragm blades

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Other names are also used for this component:
- focusing mechanism
- coarse and fine focus mechanism
- focus drive
- focus assembly
- focusing unit
- focusing block
- focus block
- focus drive assembly
- focus gear block
- focusing system
- gear block
- focus block
- gear assembly

Description of this part for the microscope.

removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

light beam are mounted in a metal housing which acts as a heat sink dissipating heat from the halogen bulb. The complete assembly forms the illuminator housing.

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

carrying the "Olympus" logo.

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. Many smaller Olympus service elements do not have their own catalog numbers or commercial names, therefore in the last photos in the gallery I indicate with an arrow exactly which element is being offered and where it is located inside the microscope. In this description some names used are descriptive rather than official technical commercial names.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

This is a part removed from the stand of an Olympus BX40 microscope. It has been tested and cleaned - and is suitable for use as a service element for repairing a damaged microscope. In the manufacturer's catalog this element carries part number AB872900.

Olympus BX series microscopes use identical assemblies in many different models, therefore there is a high probability that this element - although removed from a BX40 model - is also compatible with other BX series models (for example BX41, BX43, BX50, BX51 etc.). However, before deciding to install such an element in an Olympus BX microscope, it is advisable to first carefully compare shapes and dimensions or ask appropriate questions on forums and in Olympus BX microscope user groups.

Description of this part for the microscope.

the following microscopes:
- Olympus CX30 / CX31
- Olympus CX40 / CX41 / CX43
- Olympus BX40 / BX41 / BX43
- Olympus BX50 / BX51 / BX53
- Olympus BX60 / BX61
- and probably others

This is a black housing made of cast metal. Metal, cast or injection-molded parts of Olympus carry their own numbers. This microscope element bears the number AB8931.

Because this is a brittle casting, the housing can crumble, crack or break. The remedy is then to replace the complete head or just this part of the housing.

In the compatibility section you will find an example list of microscopes the U-TR30 fits, although that list is not complete.

Description of this part for the microscope.

removed from an Olympus U-TR30 trinocular head.

The Olympus U-TR30 / U-TR30-2 photo-trinocular heads are most often used in the following microscopes:
- Olympus CX30 / CX31
- Olympus CX40 / CX41 / CX43
- Olympus BX40 / BX41 / BX43
- Olympus BX50 / BX51 / BX53
- Olympus BX60 / BX61
- Olympus MX40 / MX50
- and probably others

Olympus offers a whole range of tubes with a 42.1 mm mounting diameter, so such mounts are fitted not only to the U-TR30 head.

The female mount for adapters with a 42 mm dovetail (more precisely, according to the manufacturer specification: 42.1 mm) is found, among others, on the following microscope heads and tubes:
- Olympus U-TR30
- Olympus U-TR30-2
- Olympus U-TR30H
- Olympus U-TR30IR
- Olympus U-TR30NIR
- Olympus U-TTR-2
- Olympus U-ETR3
- Olympus U-ETR30
- Olympus U-ETR-4
- Olympus U-SWTR
- Olympus U-SWTR-2
- Olympus U-SWTR-3
- Olympus U-SWETR
- Olympus U-SWETTR-2
- Olympus U-SWETTR-5
- Olympus MX-SWETTR
- Olympus U-CTR30-2
- Olympus U-TRU
- Olympus U-TRUS
- Olympus U-MPH
- Olympus U-TLU
- Olympus SZX-TR30
- Olympus SZX2-TTR
- Olympus SZX2-TTRPT
- and probably others

Important: as of now (2026) the microscope brand "Olympus" has been replaced by "Evident". Evident microscopes (e.g. Evident BX53) still keep the previous standard, so the 42mm mount is also found in products carrying that brand.

Metal, cast or injection-molded parts of Olympus carry their own numbers. This microscope element bears the number AB8980.

Because this is a brittle casting, the mount can crumble, crack or break. The remedy is then to replace the complete head or just this part - fortunately this mount is a separate component, fixed to the head with three screws.

And this implies another important matter: the diameter of the mount is standard, but I cannot guarantee that a mount fixed with exactly three screws fits every one of those heads and tubes, and even if it does - whether their hole spacing is the same in each of those models. The user should check that for himself based on the photos in the gallery.

Where the descriptions quoting a 51 mm diameter come from?
On the website of "Martin Microscope" and in many other descriptions available online, exactly the same (sic!) mount is described as having a diameter of 51 mm. That is the internal diameter of the ring, measured without the seat of the dovetail taper. So the 51 mm at "Martin Microscope" refers to the same mount into which a 42 mm dovetail is inserted.

This is not a part for one specific microscope model. As listed above - such a mount can be found in many heads and tubes, and these in turn in any microscope the user fits them into.

In the "compatibility" section there is an example list of microscopes the U-TR30 head fits, although it is not a complete list.