This is description of this part:
Spring-loaded pin for pushing the phase annuli (phase rings) during centring - a component of PZO phase contrast microscope condensers.
Pushing pins of this kind (sometimes called pressure pins) are fitted in the following turret condensers:
- PZO K3Ph
- PZO K3Ph1
- PZO K4Ph
- PZO KS
- PZO K3PhZ
- PZO KPI2
In these condensers each phase annulus (the so-called phase ring) sits in its own metal mount (one like this: https://www.microscopeparts.eu/part/99862). There is a notch on this mount of the phase annulus and the pin offered here fits exactly into that notch. Such a phase annulus is centred with two screws (they can be seen at the end of the video in the video gallery) and the counter-pressure is provided by the pin with the spring.
The video in the video gallery shows the inside of the PZO KS phase condenser. In it I show exactly where these pins are located and how they spring. This allows the component to be identified unambiguously.
These are small parts (the pin without the spring is merely 6 mm long) and during a phase ring replacement or condenser maintenance they can simply get lost. The spring can additionally cause the part to shoot out - and without it there is no question of correctly centring the phase annulus in the condenser.
PZO phase contrast condensers are often fitted in microscopes from manufacturers other than PZO, so the component presented here is not a repair part for one specific microscope model. This pin will help to repair a phase contrast condenser - regardless of which microscope model and which manufacturer it works in.
What is this part needed for?
- as a service part for repairing a PZO phase contrast condenser