More about part: PZO microscope spring-loaded pin for K3Ph phase contrast condenser | KPI2, KS and K4Ph compatible (ID: 99857)
Main Photo
Description
PZO microscope spring-loaded pin for K3Ph phase contrast condenser | KPI2, KS and K4Ph compatibleSpring-loaded pin for pushing the phase annuli (phase rings) during centring - a component of PZO phase contrast microscope condensers.
Pushing pins of this kind (sometimes called pressure pins) are fitted in the following turret condensers:
- PZO K3Ph
- PZO K3Ph1
- PZO K4Ph
- PZO KS
- PZO K3PhZ
- PZO KPI2
In these condensers each phase annulus (the so-called phase ring) sits in its own metal mount (one like this: [[ LINK ]]). There is a notch on this mount of the phase annulus and the pin offered here fits exactly into that notch. Such a phase annulus is centred with two screws (they can be seen at the end of the video in the video gallery) and the counter-pressure is provided by the pin with the spring.
The video in the video gallery shows the inside of the PZO KS phase condenser. In it I show exactly where these pins are located and how they spring. This allows the component to be identified unambiguously.
These are small parts (the pin without the spring is merely 6 mm long) and during a phase ring replacement or condenser maintenance they can simply get lost. The spring can additionally cause the part to shoot out - and without it there is no question of correctly centring the phase annulus in the condenser.
PZO phase contrast condensers are often fitted in microscopes from manufacturers other than PZO, so the component presented here is not a repair part for one specific microscope model. This pin will help to repair a phase contrast condenser - regardless of which microscope model and which manufacturer it works in.
Manufacturer
PZO - (Polskie Zaklady Optyczne) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- as a service part for repairing a PZO phase contrast condenser
Compatibility
This microscope part is compatible with the following microscope models, among others:
- PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)
- PZO Biolar
- PZO MB-30
- PZO MB 30S
- PZO KS condenser
- PZO KPI2 DIC condenser
- PZO K3PhZ condenser




