This is description of this part:
Spring-loaded pin for pushing the phase annuli (phase rings) during centring - a component of PZO phase contrast microscope condensers.
Pushing pins of this kind (sometimes called pressure pins) are fitted in the following turret condensers:
- PZO K3Ph
- PZO K3Ph1
- PZO K4Ph
- PZO KS
- PZO K3PhZ
- PZO KPI2
In these condensers each phase annulus (the so-called phase ring) sits in its own metal mount (one like this: https://www.microscopeparts.eu/part/99862). There is a notch on this mount of the phase annulus and the pin offered here fits exactly into that notch. Such a phase annulus is centred with two screws (they can be seen at the end of the video in the video gallery) and the counter-pressure is provided by the pin with the spring.
The video in the video gallery shows the inside of the PZO KS phase condenser. In it I show exactly where these pins are located and how they spring. This allows the component to be identified unambiguously.
These are small parts (the pin without the spring is merely 6 mm long) and during a phase ring replacement or condenser maintenance they can simply get lost. The spring can additionally cause the part to shoot out - and without it there is no question of correctly centring the phase annulus in the condenser.
PZO phase contrast condensers are often fitted in microscopes from manufacturers other than PZO, so the component presented here is not a repair part for one specific microscope model. This pin will help to repair a phase contrast condenser - regardless of which microscope model and which manufacturer it works in.
What is this part needed for?
- as a service part for repairing a PZO phase contrast condenser
- What category does this part belong to?
- Service and spare parts [ link ] [More Service and spare parts]
- Who manufactures this part?
-
- PZO - Polskie Zaklady Optyczne [ link ] [More PZO]
- PZO Warszawa
- PZO Poland
- PZO Warszawa Poland
- What microscope does this part come from?
- Mikroskop PZO Biolar [ link ] [More from Biolar]
- What microscopes or components is this part compatible with?
-
- PZO PZO K3Ph Phase Contrast Microscope Condenser (K4Ph, K3Ph1)
- PZO Biolar
- PZO MB-30
- PZO MB 30S
- PZO KS condenser
- PZO KPI2 DIC condenser
- PZO K3PhZ condenser
- PZO Biolar microscope repair parts
- PZO K3Ph Mikroskop Federbolzen fehlt - Ersatz
- PZO microscope phase annulus centering pin missing
- PZO K4Ph Mikroskop Kondensor Feder verloren
- PZO microscope condenser spring lost during cleaning
- PZO K3Ph1 Mikroskop Kondensor fetten und reinigen
- PZO phase contrast condenser lubrication service
- PZO KS Mikroskop Kondensor altes Fett entfernen
- PZO microscope condenser dried grease - cleaning
- PZO K3PhZ Phasenblende zentrieren Bolzen Mikroskop
- PZO centring the phase annulus - spare pin
- PZO KPI2 Pluta Mikroskop Kondensor Stift mit Feder
- kleiner schwarzer Stift aus PZO Mikroskopkondensor
- small black pin from microscope condenser
- brak bolca dociskającego krążek fazowy PZO
- zgubiona sprężynka z kondensora mikroskopu PZO
- centrowanie przysłony fazowej PZO - trzpień
- chybí pružinka v mikroskopovém kondenzoru PZO
- perdido muelle condensador de microscopio PZO
- pasador de centrado anillo de fases PZO Biolar
- molla persa condensatore microscopio PZO
- perno di centraggio anello di fase PZO Biolar
- PZO buy spare parts