This is description of this part:
Microscope condenser for Carl Zeiss Jena Jenamed Histology microscopes.
It DOES NOT FIT other Carl Zeiss Jena microscope models from the Jenamed series and therefore cannot be used in:
- Jenamed Cytology
- Jenamed Variant
- Jenamed Hematology
- Jenamed Fluorescence
- Jenamed-2
Mechanically, this condenser is a "flip-out" design and is mounted in a metal frame together with a lever used to rotate it in order to obtain one of two operating modes: low or high numerical aperture N.A. This lever extends outside the microscope housing so that the user can operate it.
The complete module is mounted underneath the microscope stage by attaching the entire condenser assembly from below with four screws. This condenser does not contain an iris diaphragm because, in Jenamed microscopes, it is a separate component mounted beneath the condenser.
In the Carl Zeiss Jena Jenamed Histology microscope, this condenser is not used together with the wide-field lens that is installed beneath the condenser in other Jenamed models (part Si10 CZ 2711-1). In the Jenamed Histology model, a polarizer is installed in this position instead.
Replacement of the condenser in a Carl Zeiss Jena Jenamed Histology microscope may be necessary:
- when the upper lens becomes damaged, for example by becoming cloudy due to exposure to various chemical reagents
- when the upper lens is damaged by friction. Surprisingly, this unusual type of damage is very common after several decades of microscope use
- when the mechanical lens switching mechanism ("flip-out") becomes damaged
Metal cast or injection-moulded microscope parts manufactured by Carl Zeiss Jena carry their own part numbers. This condenser module bears number 2713 (full marking: Si10 CZ 2713).
In the last photograph, I indicate with an arrow exactly which component is being offered and where it is located within the microscope.
What is this part needed for?
- as a repair part in the form of replacing the complete part if it or one of its elements is damaged or of very poor quality
- several examples of applications are given in the description
- What category does this part belong to?
- Condensers [ link ] [More Condensers]
- Who manufactures this part?
-
- Carl Zeiss Jena - VEB Carl Zeiss Jena DDR (former East Germany) [ link ] [More Carl Zeiss Jena]
- ausJena
- aus Jena
- What microscope does this part come from?
- Mikroskop Carl Zeiss Jena Jenamed [ link ] [More from Jenamed]
- What microscopes or components is this part compatible with?
-
- Carl Zeiss Jena Jenamed Histology
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenamed microscope repair parts
- Carl Zeiss Jena Jenamed microscope condenser
- kondensor do mikroskopu Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenamed Mikroskop-Kondensor
- Carl Zeiss Jena buy spare parts