This is description of this part:
Rack gear (toothed rack) for the coarse focus movement (coarse adjustment) of LOMO Biolam / Bresser Biolam series microscopes.
In LOMO Biolam microscopes the stage does not move vertically, as it does for example in the LOMO MBB-1 and LOMO MIN-8 microscopes. In the Biolam models the coarse focusing is done by the vertical movement (raising and lowering) of the whole arm together with the head and the objective nosepiece.
Basic parameters of this rack gear:
Manufacturer: LOMO (ЛОМО)
Material: blackened brass
Length: 80 mm
Number of teeth: 54
Mounting: screwed down with two screws
Mechanically this toothed rack is screwed to the arm and runs on a gear wheel like this one: https://www.microscopeparts.eu/part/00745.
Racks of this kind were fitted among others in the following microscopes:
- Lomo Erudit (ЛОМО Эрудит)
- Lomo Biolam 70
- Lomo Micmed-1
- Lomo Biolam Д1 / Д2 / Д3 / Д11 / Д12 / Д13 ("D" series - portable)
- Lomo Biolam C1 / C2 / C3 / C11 / C12 / C13 ("S" series - student)
- Lomo Biolam P1 / P2 / P3 / P4 / P5 / P6 / P7 / P11 / P12 / P13 / P14 / P15 / P16 / P17 ("R" series - routine work)
- in the same microscopes sold in Germany under the names Bresser Biolam and Bresser Erudit, including the newest ones with illumination integrated in the base
- and in the same microscopes sold in the United Kingdom under the name Zenith Biolam
Important: in this (https://www.microscopeparts.eu/photo/99672-7) photo in the photo gallery you can see that the rack is slightly bowed into an arc. This is intentional and done at the factory. Its purpose is to keep the teeth permanently pressed against the gear wheel: bowed into an arc and screwed down at both ends, the rack works like a leaf spring and pushes with its middle against the gear wheel, which keeps the mesh of these two parts free of play over the entire travel. Without that bow the contact pressure disappears and the whole assembly sinks under its own weight. All long racks of this type are made this way, provided they are metal. With plastic racks, shims are often fitted in the middle underneath the rack to force that deformation. And from this follows one of the possible solutions to the problem of the self-lowering arm in Lomo / Bresser Biolam and Erudit microscopes: it is enough to bend the rack a little more.
Replacing the coarse focus rack gear in LOMO / Bresser Biolam microscopes should help among others with the following problems:
- when the microscope arm stops during the vertical movement even though the knob keeps turning. This may mean that the rack has no teeth at that spot - they are worn away or broken off
- when the arm does not move smoothly while focusing. In this case the rack may still have all its teeth, but in some places they are filed down and the gear wheel barely slides over them
ЛОМО marked the series with Cyrillic letters, which is why the letter engraved on the microscope does not always mean what it seems to mean at first glance: Д is the Latin D, but the Russian C is read as S and the Russian P as R.
The same models in the notation used on western markets:
- Lomo Biolam D-1 / D-2 / D-3
- Lomo Biolam S-1 / S-2 / S-3
- Lomo Biolam R-1 / R-2 / R-3 / R-4 / R-5 / R-6 / R-7
- Lomo Biolam D-11 / D-12 / D-13
- Lomo Biolam S-11 / S-12 / S-13
- Lomo Biolam R-11 / R-12 / R-13 / R-14 / R-15 / R-16 / R-17
A comparison table of the first generation Lomo Biolam microscope models (with one digit in the model name) can be seen here: https://www.microscopeparts.eu/photo/99964-1.
A comparison table of the second generation Lomo Biolam microscope models (with two digits in the model name) can be seen here: https://www.microscopeparts.eu/photo/99983-5.
What is this part needed for?
- as a service part when the rack gear (toothed rack) in the microscope needs to be replaced