<< [ Previous ]

Webpage www.microscopeparts.eu - sale of original, used and refurbished service, repair, and replacement parts for student, biological, laboratory, measuring, toolmakers, and stereo microscopes. Mail order.


More about part: Lomo Biolam microscope brass coarse focus rack gear | Bresser Biolam compatible rack and pinion focusing mechanism spare part (ID: 99672)


X.com Facebook Markdown Media-Markdown


Main Photo

Lomo Biolam microscope brass coarse focus rack gear | Bresser Biolam compatible rack and pinion focusing mechanism spare part
Lomo Biolam microscope brass coarse focus rack gear | Bresser Biolam compatible rack and pinion focusing mechanism spare part
Photo gallery

Description

Lomo Biolam microscope brass coarse focus rack gear | Bresser Biolam compatible rack and pinion focusing mechanism spare part

Rack gear (toothed rack) for the coarse focus movement (coarse adjustment) of LOMO Biolam / Bresser Biolam series microscopes.

In LOMO Biolam microscopes the stage does not move vertically, as it does for example in the LOMO MBB-1 and LOMO MIN-8 microscopes. In the Biolam models the coarse focusing is done by the vertical movement (raising and lowering) of the whole arm together with the head and the objective nosepiece.

Basic parameters of this rack gear:

Manufacturer
LOMO (ЛОМО)
Material
blackened brass
Length
80 mm
Number of teeth
54
Mounting
screwed down with two screws


Mechanically this toothed rack is screwed to the arm and runs on a gear wheel like this one: [[ LINK ]].

Racks of this kind were fitted among others in the following microscopes:

  • Lomo Erudit (ЛОМО Эрудит)
  • Lomo Biolam 70
  • Lomo Micmed-1
  • Lomo Biolam Д1 / Д2 / Д3 / Д11 / Д12 / Д13 ("D" series - portable)
  • Lomo Biolam C1 / C2 / C3 / C11 / C12 / C13 ("S" series - student)
  • Lomo Biolam P1 / P2 / P3 / P4 / P5 / P6 / P7 / P11 / P12 / P13 / P14 / P15 / P16 / P17 ("R" series - routine work)
  • in the same microscopes sold in Germany under the names Bresser Biolam and Bresser Erudit, including the newest ones with illumination integrated in the base
  • and in the same microscopes sold in the United Kingdom under the name Zenith Biolam


Important: in this ([[ LINK ]]) photo in the photo gallery you can see that the rack is slightly bowed into an arc. This is intentional and done at the factory. Its purpose is to keep the teeth permanently pressed against the gear wheel: bowed into an arc and screwed down at both ends, the rack works like a leaf spring and pushes with its middle against the gear wheel, which keeps the mesh of these two parts free of play over the entire travel. Without that bow the contact pressure disappears and the whole assembly sinks under its own weight. All long racks of this type are made this way, provided they are metal. With plastic racks, shims are often fitted in the middle underneath the rack to force that deformation. And from this follows one of the possible solutions to the problem of the self-lowering arm in Lomo / Bresser Biolam and Erudit microscopes: it is enough to bend the rack a little more.

Replacing the coarse focus rack gear in LOMO / Bresser Biolam microscopes should help among others with the following problems:

  • when the microscope arm stops during the vertical movement even though the knob keeps turning. This may mean that the rack has no teeth at that spot - they are worn away or broken off
  • when the arm does not move smoothly while focusing. In this case the rack may still have all its teeth, but in some places they are filed down and the gear wheel barely slides over them


▼ More about this microscope part

ЛОМО marked the series with Cyrillic letters, which is why the letter engraved on the microscope does not always mean what it seems to mean at first glance: Д is the Latin D, but the Russian C is read as S and the Russian P as R.

The same models in the notation used on western markets:
- Lomo Biolam D-1 / D-2 / D-3
- Lomo Biolam S-1 / S-2 / S-3
- Lomo Biolam R-1 / R-2 / R-3 / R-4 / R-5 / R-6 / R-7
- Lomo Biolam D-11 / D-12 / D-13
- Lomo Biolam S-11 / S-12 / S-13
- Lomo Biolam R-11 / R-12 / R-13 / R-14 / R-15 / R-16 / R-17

A comparison table of the first generation Lomo Biolam microscope models (with one digit in the model name) can be seen here: [[ LINK ]].

A comparison table of the second generation Lomo Biolam microscope models (with two digits in the model name) can be seen here: [[ LINK ]].

Manufacturer

Lomo - (Leningrad Optical Mechanical Association) ➔ All parts

It comes from

This part was removed from the following microscope:

Lomo Biolam ➔ All parts

Why do you need this?

This microscope part is typically used for the following purposes:

  • as a service part when the rack gear (toothed rack) in the microscope needs to be replaced

Compatibility

This microscope part is compatible with the following microscope models, among others:

Names, descriptions, terms, and search contexts under which this part is searched.

Frequently Asked Questions (FAQ)

Below you will find answers to the most frequently asked questions (FAQ).

What can be found on this page?

This page contains a detailed description of the microscope component Lomo - Biolam microscope brass coarse focus rack gear | Bresser Biolam compatible rack and pinion focusing mechanism spare part

Is the microscope component offered here an original part?

YES - this is an original component. It is not a 3D-printed part nor a third-party replacement.

Who is the manufacturer of this component?

The manufacturer of this component is Lomo (Leningrad Optical Mechanical Association)

Is this microscope component new?

NO - this item was removed from Lomo Biolam microscope, has been inspected, cleaned, and is fully functional and ready for further use.

Which microscopes is this component compatible with?

This component is compatible with, among others, the following microscopes:
  • Lomo Biolam
  • Bresser Biolam
  • Lomo Biolam D11
  • Lomo MBP-1
  • Lomo Erudit
  • Lomo Biolam 70
  • Bresser Erudit

Can I purchase this microscope component and how does the process work?

If you are interested in this component, contact the owner by clicking the "Show contact info" button on the page. No need to worry - clicking it does not create any transaction; it only displays the owner's contact details.

Who is this component intended for and for what purpose can it be used?

This component is most commonly used for the following purposes:
  • as a service part when the rack gear (toothed rack) in the microscope needs to be replaced

Are other microscope components from this manufacturer available?

YES. By clicking here you can view a list of all microscope components from this manufacturer available in the database.

Where can I view a photo gallery of this component from different angles?

A gallery with all photos of this component can be found on page , showing the component from multiple angles.
I have more than one piece
Since I have more than one of this item, please be advised that individual pieces may vary slightly. Upon request, I can send you a photo of a specific piece before ordering. You can contact me at email
Contact details
If you need Lomo Biolam microscope brass coarse focus rack gear | Bresser Biolam compatible rack and pinion focusing mechanism spare part (ID 99672) , just write at info@microscopeparts.eu
Információk a Magyarországra történő szállításról

A magyar testvérek nem fizetnek szállításért.

Miért? Nos, ez egyszerű:

Lengyel-magyar két jó barát
Együtt harcol s issza borát
Vitéz s bátor mindkettője
Áldás szálljon mindkettőre
Price information
Sometimes, it may happen that I've completely missed the mark with the price and it's way too high. If you think so and would like to purchase the item, simply send me an email