This is description of this part:
Digital microphotography set Nikon Digital Sight with the Nikon DS-Fi1 camera and the Nikon DS-U2 controller, for biological and stereo microscopes of any manufacturer.
The set offered here includes:
- Nikon DS-Fi1 digital camera
- Nikon DS-U2 controller
- Nikon cable E229586 DS camera interface cable 3 m
- USB cable
- power supply 12 V 60 W
Basic parameters of the Nikon DS-Fi1 camera:
Image sensor: interline CCD 2/3 inch, square pixel, 5.24 MP, colour
Infrared cut filter: built in
Recording resolutions: 2560 x 1920, 1280 x 960, 640 x 480
Sensitivity: equivalent of ISO 64
Max. frame rate: 5.9 fps (5M interlaced), 10.0 fps (1.3M interlaced), 12.0 fps (1.3M progressive), 23.3 fps (center scan)
Mount: C-mount
Recommended reducing adapter: 0.7x relay lens
Power: from the controller only, through the dedicated 3 m cable (marked -12V / 5V / 18V on the plate)
Cable between camera and controller: DS camera cable 3 m, Nikon catalogue number E229586
Basic parameters of the Nikon DS-U2 controller:
Electronic shutter with the DS-Fi1: 1/1000 s to 60 s
Corrections: white balance, gamma, black level, saturation, hue, shading correction, noise reduction, sharpening
Interfaces: USB 2.0 device to the PC, USB 2.0 host to the Nikon 80i/90i microscope, camera connector
Image transfer format: RGB 24 bit, mono 8 bit, RAW 12 bit
Power: 12 VDC +/- 5%, consumption 35 VA, mains adapter 100-240 VAC 50/60 Hz
Software: NIS-Elements F package, available for download from Nikon's website
This camera can be used with any microscope of any manufacturer, because it has a C-mount connector. In the "compatibility" section I list only a few example microscopes this set can work with.
What is this part needed for?
- if you are looking for a high quality microscope camera for microphotography
- if you own a Nikon microscope and want to complete it with a microscope camera of the same manufacturer