More about part: Nikon Digital Sight DS-Fi1 C-mount microscope camera and Nikon DS-U2 controller with cable and power supply (ID: 99986)
Main Photo
Description
Nikon Digital Sight DS-Fi1 C-mount microscope camera and Nikon DS-U2 controller with cable and power supplyDigital microphotography set Nikon Digital Sight with the Nikon DS-Fi1 camera and the Nikon DS-U2 controller, for biological and stereo microscopes of any manufacturer.
The set offered here includes:
- Nikon DS-Fi1 digital camera
- Nikon DS-U2 controller
- Nikon cable E229586 DS camera interface cable 3 m
- USB cable
- power supply 12 V 60 W
Basic parameters of the Nikon DS-Fi1 camera:
- Image sensor
- interline CCD 2/3 inch, square pixel, 5.24 MP, colour
- Infrared cut filter
- built in
- Recording resolutions
- 2560 x 1920, 1280 x 960, 640 x 480
- Sensitivity
- equivalent of ISO 64
- Max. frame rate
- 5.9 fps (5M interlaced), 10.0 fps (1.3M interlaced), 12.0 fps (1.3M progressive), 23.3 fps (center scan)
- Mount
- C-mount
- Recommended reducing adapter
- 0.7x relay lens
- Power
- from the controller only, through the dedicated 3 m cable (marked -12V / 5V / 18V on the plate)
- Cable between camera and controller
- DS camera cable 3 m, Nikon catalogue number E229586
Basic parameters of the Nikon DS-U2 controller:
- Electronic shutter with the DS-Fi1
- 1/1000 s to 60 s
- Corrections
- white balance, gamma, black level, saturation, hue, shading correction, noise reduction, sharpening
- Interfaces
- USB 2.0 device to the PC, USB 2.0 host to the Nikon 80i/90i microscope, camera connector
- Image transfer format
- RGB 24 bit, mono 8 bit, RAW 12 bit
- Power
- 12 VDC +/- 5%, consumption 35 VA, mains adapter 100-240 VAC 50/60 Hz
- Software
- NIS-Elements F package, available for download from Nikon's website
This camera can be used with any microscope of any manufacturer, because it has a C-mount connector. In the "compatibility" section I list only a few example microscopes this set can work with.
Manufacturer
Nikon - (Nikon Instruments (Nikon Corp.)) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- if you are looking for a high quality microscope camera for microphotography
- if you own a Nikon microscope and want to complete it with a microscope camera of the same manufacturer
Compatibility
This microscope part is compatible with the following microscope models, among others:
- Nikon Microphot
- Nikon Optiphot
- Nikon Labophot
- Nikon Alphaphot
- Nikon SMZ-10
- Nikon TMS
- Nikon Eclipse E800
- Nikon Eclipse E1000
- Nikon Eclipse E200
- Nikon Eclipse E400
- Nikon Eclipse E600
- Nikon Eclipse 90i
- Nikon Eclipse 80i
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenalumar
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Ergaval
- Carl Zeiss Jena Jenavert
- Carl Zeiss Jena Jenapol
- Zeiss Axiovert 25
- Zeiss Axiovert 135
- Zeiss Axiophot
- Zeiss Axioplan
- Zeiss Axioskop 20
- Zeiss Axiolab A1
- Zeiss Axioskop
- Zeiss Axioskop 2
- Zeiss Axio Imager 2
- Zeiss Photomicroscope II
- Zeiss Photomicroscope III RS
- Zeiss Standard WL
- Zeiss Standard 16
- Zeiss Photomicroscope
- Olympus BH-2 BHS
- Olympus BX
- Olympus BX40
- Olympus BX41
- Olympus BX51
- PZO Biolar
- PZO Studar
- Olympus CH-2 CHT
- Olympus CH-2 CHS
- Olympus CX31
- Olympus CX41
- Olympus CX
- Olympus BX50
- Olympus BH-2 BHTU



