This is description of this part:
Microscope objective Zeiss for phase contrast.
Basic parameters:
Manufacturer: Zeiss
Designation: 10/0,22 160/-
Manufacturer number: 46 04 01 - 9904
Magnification: 10x
Correction: achromat
Numerical aperture: 0.22
Tube length: 160 mm
Focal length: 45 mm
Cover glass: indifferent
Immersion: no
Thread: RMS
Ph1: phase contrast
This specific unit was used in an inverted Zeiss ID 02 microscope, but I have also seen this objective model in Zeiss KF-2 ICS and Zeiss Axiostar microscopes.
Objectives with such low magnification (here 10x) can be used without a cover glass, with a cover glass, or for observation through thicker glass (e.g. through a Petri dish), therefore they can be used both in upright and inverted microscopes.
It can be used with any microscope from any manufacturer together with a compatible phase contrast condenser (or slider with phase rings). Of course the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm.
What is this part needed for?
- If you have a microscope without objectives and need to restock it using original parts
- If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
- If you have such an objective lens, but it's of very poor quality or damaged
- If you're cautious and want to have a spare objective lens
