Zeiss IM 35 / ICM 405 microscope pinion gear from rack and pinion focus drive - main photo

Part Index: 99959

Zeiss IM 35 / ICM 405 microscope pinion gear from rack and pinion focus drive

(Zeiss IM 35 / ICM 405 microscope pinion gear from rack and pinion focus drive)

Zeiss IM 35 / ICM 405 microscope pinion gear from rack and pinion focus drive - different 2 view
Photo 2 – Zeiss IM 35 / ICM 405 microscope pinion gear from rack and pinion focus drive

This is description of this part:

A single gear wheel - a service part from the gear train of the focus drive in the Carl Zeiss ICM 405 / IM 35 inverted microscopes.

In the Zeiss IM 35 and Zeiss ICM 405 inverted microscopes, focusing is done by raising and lowering the nosepiece with the objectives. The rotary movement of the focus knobs is converted into the vertical travel of the nosepiece by a gear train with two steel gear wheels.

What I offer here is exactly one of those gear wheels - a rack and pinion gear.

Material: steel
Construction: gear wheel with a pinion on the shaft
Diameter of the gear wheel: 35 mm
Diameter of the pinion: 7 mm
Centre: there is a bore in the middle which takes the shaft

The last photo in the gallery shows the body of the Zeiss IM 35 microscope with the side covers removed. An arrow points to where this gear train sits inside the microscope. The other photos show the gear train already taken out, with an arrow pointing to the gear wheel in question. This allows the part described here to be identified beyond any doubt.

What is this part needed for?

  • as a service part for repairing the gear train in the Carl Zeiss IM 35 / ICM 405 inverted microscope
  • when a single gear wheel has to be replaced, for example with broken teeth
What category does this part belong to?
Service and spare parts [ link ] [More Service and spare parts]
Who manufactures this part?
  • Zeiss - Carl Zeiss West Germany [ link ] [More Zeiss]
  • Carl Zeiss West
  • Carl Zeiss West Germany
  • Opton
What microscope does this part come from?
Mikroskop Zeiss IM 35 [ link ] [More from IM 35]
What microscopes or components is this part compatible with?
  • Zeiss ICM 405
  • Zeiss IM 35

Names, descriptions, terms, and search contexts under which this part is searched.

  • Zeiss IM 35 microscope repair parts
  • Zeiss IM 35 Fokussierknopf dreht durch ohne Wirkung
  • Zeiss ICM 405 Scharfstellung geht nicht mehr
  • Zeiss IM 35 Objektivrevolver lässt sich nicht heben
  • Zeiss ICM 405 Zahnrad Zähne ausgebrochen
  • Zeiss IM 35 Fokus hakt und springt
  • Zeiss ICM 405 Fokustrieb neu fetten und gangbar machen
  • Zeiss IM 35 focus knob turns but nothing moves
  • Zeiss ICM 405 focus will not hold position
  • Zeiss IM 35 nosepiece will not go up or down
  • Zeiss ICM 405 broken teeth on focus pinion
  • Zeiss IM 35 jerky focus movement repair
  • Zeiss ICM 405 rack and pinion regrease focus drive
  • Zeiss IM 35 Ersatz Zahnrad Fokussiertrieb
  • Zeiss ICM 405 replacement pinion focus drive
  • Zeiss Axiovert 10 Fokustrieb Zahnrad defekt
  • Zeiss Axiovert 35 focus gear stripped
  • Zeiss IM 35 stripped gear found after disassembly
  • ozubené kolo zaostření Zeiss IM 35 mikroskop
  • el enfoque del Zeiss IM 35 no sube microscopio invertido
  • engranaje de enfoque Zeiss ICM 405 recambio
  • la messa a fuoco Zeiss IM 35 non sale
  • ingranaggio messa a fuoco Zeiss ICM 405 ricambio
  • wyłamane zęby w kole zębatym ostrości Zeiss IM 35
  • Zeiss buy spare parts