This is description of this part:
Centering screw for the microscope head (e.g., binocular head or trinocular head) mounted on the stand of the Carl Zeiss Standard series microscopes.
This particular screw was removed from a Zeiss Standard 14 microscope, but it will most likely fit most models of the Standard series, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89
- Zeiss Standard Universal
- Zeiss Standard Photomicroscope
- Zeiss Ultraphot
Note - over the years, Zeiss microscopes (or the same microscopes sold under the Zeiss-Winkel name or under the Opton brand), especially simpler models such as the Zeiss Standard Junior, used different types of head-centering screws. These were not necessarily this type - in some cases ordinary threaded clamping screws were used instead.
Before deciding to replace the screw in a microscope, it is best to carefully compare its appearance and dimensions with the photographs in the gallery or ask a question on the forum https://www.mikroskopie-forum.de/
In the last photos in the gallery, I use arrows to show exactly which microscope component is being offered and where it is in the microscope located .
What is this part needed for?
- Sometimes this screw is missing in used microscopes.
- Very often, the tiny screw in this element is broken or missing.
- This element often has dried grease.
- This screw is often damaged because when it wouldn't turn due to dried grease, someone used pliers to turn it.
