More about part: Zeiss Standard microscope head holder centering screw (ID: 99489)
Zeiss Standard microscope head holder centering screw
Main Photo
Description
Zeiss Standard microscope head holder centering screwCentering screw for the microscope head (e.g., binocular head or trinocular head) mounted on the stand of the Carl Zeiss Standard series microscopes.
This particular screw was removed from a Zeiss Standard 14 microscope, but it will most likely fit most models of the Standard series, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89
- Zeiss Standard Universal
- Zeiss Standard Photomicroscope
- Zeiss Ultraphot
Note - over the years, Zeiss microscopes (or the same microscopes sold under the Zeiss-Winkel name or under the Opton brand), especially simpler models such as the Zeiss Standard Junior, used different types of head-centering screws. These were not necessarily this type - in some cases ordinary threaded clamping screws were used instead.
Before deciding to replace the screw in a microscope, it is best to carefully compare its appearance and dimensions with the photographs in the gallery or ask a question on the forum https://www.mikroskopie-forum.de/
In the last photos in the gallery, I use arrows to show exactly which microscope component is being offered and where it is in the microscope located .
Manufacturer
Zeiss - (Carl Zeiss West Germany) ➔ All parts
It comes from
Why do you need this?
- Sometimes this screw is missing in used microscopes.
- Very often, the tiny screw in this element is broken or missing.
- This element often has dried grease.
- This screw is often damaged because when it wouldn't turn due to dried grease, someone used pliers to turn it.
Compatibility
This microscope part is compatible with the following microscope models: