Lomo Polam L-213 polarizing microscope СЛ1/4λ mica quarter-wave compensating slider w. diagonal axis | SL 1/4 - photo gallery

This is description of this part:

LOMO СЛ1/4λ (Latin alphabet transcription: SL1/4lambda) Quarter-wave plate - standard variant with diagonal axis (45 degrees) for Lomo Polam polarizing microscopes

Lomo microscope compensating slider:
Factory marking: СЛ1/4λ
Crystal material: Mica
Optical retardation: 1/4 lambda (approx. 140 nm)
Orientation of optical axes: diagonal, 45 degrees relative to the slider body edge

Dimensions:
Total length: 80 mm
Insertion length: 60 mm
Width: 19 mm
Height: 7,5 mm

Quarter-wave compensating slider (quarter-wave plate) introducing a phase shift of 1/4 wavelength. Used for standard compensation, determination of the optical sign of minerals, and analysis of elliptically polarized light.

The axes of the fast ray (Np) and slow ray (Ng) are oriented at 45 degrees relative to the longitudinal axis of the slider. This is the standard configuration used in the vast majority of classic polarizing microscopes, where the accessory slot is parallel to the microscope arm and the vibration axes of the crystal must align precisely with the diagonal of the polarizer and analyzer directions.

A second variant of this slider is also available - of the Sénarmont type, designated by the abbreviation CP-QS (Compensating Plate, Quarter-wave Sénarmont). In the Sénarmont configuration, the crystal axis (Ng) runs parallel to the vibration direction of the polarizer, and the 45-degree effect is enforced by the microscope accessory slot - not by the orientation of the crystal within the body. The Sénarmont variant is intended for specialized LOMO microscope heads with a 45-degree-rotated accessory slot and for precise quantitative measurements of optical retardation in combination with a rotating analyzer and an interference filter (typically 546 nm or 551 nm). Before purchasing, please check the design of your microscope. Using the incorrect variant will cause the crystal axes to misalign with the vibration direction of the polarized light, preventing proper background extinction as well as precise measurements and conoscopic observations.

What is this part needed for?

• If you have a polarizing microscope and you are missing this compensator on the slider
• If you have this slide, but it's damaged (e.g., delamination)
• If you want to use this quarter-wave plate for other DIY purposes

What category does this part belong to?

Sliders [ link ] [More Sliders]

Who manufactures this part?

• Lomo - Leningrad Optical Mechanical Association [ link ] [More Lomo]
• LZOS
• TOMP
• WTOMP
• WOOMP
• GOMZ
• LOOMP
• Progres
• Progress

What microscope does this part come from?

Mikroskop Lomo Polam L-213 [ link ] [More from Polam L-213]

What microscopes or components is this part compatible with?

• Lomo Polam
• Lomo Polam R-113
• Lomo Polam L-211
• Lomo Polam LMPR
• Lomo Polam R-311
• Lomo Polam L-213
• Lomo Polam S-111
• Lomo Polam S-112
• Lomo Polam R-111
• Lomo Polam R-112

Names, descriptions, terms, and search contexts under which this part is searched.

• Lomo Polam L-213 microscope repair parts
• Lomo Polam СЛ1/4λ ćwierćfalowa wsuwka kompensacyjna mika
• Lomo Polam ćwierćfalówka polaryzacyjna SL 1/4 lambda
• Lomo Polam L-213 Polarisations-Mikroskop СЛ1/4λ Viertelwellen Kompensations Schieber
• Lomo Polam Lambda Glimmer Viertel-Plättchen
• Lomo Polam polarizing microscope СЛ1/4λ mica quarter-wave compensating slider
• Lomo Polam microscope SL 1/4 lambda plate
• Lomo buy spare parts