Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

microscope. The head contains a built-in Bertrand lens that can be moved out of the optical path. This allows both standard orthoscopic and conoscopic observations to be performed.

Basic parameters:
Manufacturer: Leitz Wetzlar
Compatible eyepiece diameter: 30 mm
Compatible eyepiece type: both standard eyepieces and polarizing eyepieces with a positioning key
Bertrand lens: yes, with an adjustment knob
Compatible with: Leitz Wetzlar SM-Pol microscope

Important: the non-polarizing versions of the Leitz Wetzlar SM microscope (and the SM-D) use a different head mounting system, therefore this head is not compatible with those models.

In the last photograph, an arrow indicates exactly which component is being offered and where it is located within the microscope, allowing this part to be identified unambiguously. In addition, the attached video shows, among other things, the mechanism used to move the Bertrand lens.

Description of this part for the microscope.

at the end of the microscope arm and performs several functions:
- a microscope head is mounted on its top side (monocular, binocular or trinocular photographic head)
- inside there is a slide containing a polarizing analyzer that can be moved out of the optical path using a switch
- a polarizing objective nosepiece is mounted to the underside of this component

In the last photo, an arrow indicates which component is being offered and where it is located in the microscope, making it possible to identify this part unambiguously. In addition, the attached video shows the mechanism responsible for moving the polarization analyzer.

Description of this part for the microscope.

type: RMS
Centering: yes, each objective can be centered independently (a special key / tool is required)
Mounting method: the nosepiece is attached to the microscope body using screws

In the last photo, an arrow indicates which element is being offered and where it is located in the microscope, allowing this part to be identified unambiguously. Additionally, the attached video shows the movement mechanism of this nosepiece.

Description of this part for the microscope.

transmitted light work
Mounting method: this stage is attached to the microscope body using screws
Centering: in the Leitz Wetzlar SM-Pol microscope, this stage is centered using two screws

Many users of the Leitz Wetzlar SM microscope (or SM-D) ask the following question:
- Can I install the polarizing stage from the Leitz SM-Pol microscope into a Leitz SM microscope and thus convert it into a polarizing microscope?
- The answer is: No. The centering mechanism of this polarizing stage means that this stage is not compatible with the non-polarizing Leitz SM microscope. Moreover, the Leitz SM microscope differs from the polarizing SM-Pol model not only in the stage.

In the last photo, an arrow indicates which element is being offered and where it is located in the microscope, allowing this part to be identified unambiguously. Additionally, the attached video shows the movement mechanism of this stage.

Description of this part for the microscope.

of 39.5 mm for mounting the condenser
- a condenser height adjustment knob
- a rack gear

This component fits various versions of the Leitz Wetzlar SM microscope:
- Leitz SM
- Leitz SM-D
- Leitz SM-Pol

Description of this part for the microscope.

not intended for so-called "thick" objectives
Thread in the cap: no, the cap of this objective case does not contain a thread for attaching an RMS objective

This objective case can be used to store so-called "short" objectives (DIN 33 mm), longer objectives (DIN 37 mm), and long objectives (DIN 45 mm), provided they are not the so-called "thick" type.

Various names are used on the secondary market for a microscope objective case, including:
- objective case
- microscope objective case
- objective container
- microscope objective container
- objective storage case
- objective storage container
- objective box
- objective storage box
- protective objective case
- objective lens case
- objective lens container
- dust protection case
- transport case for microscope objectives
- microscope objective holder case
- storage canister for microscope objectives

Each case has the Leitz Wetzlar logo on its cap.

Although this case is of greatest interest to users and collectors of objectives made by the manufacturer Leitz Wetzlar, it can of course be used to store objectives from any manufacturer.

Description of this part for the microscope.

4x
Kind: projection eyepiece for photomicrography
Intended for: microscopes corrected for objectives with TL = 170 mm
Mounting diameter: 23.2 mm

Projection eyepieces are special microscope eyepieces used to project the microscopic image onto the sensor of a camera. Many microscope photo tubes and trinocular heads have a seat for a projection eyepiece.

Leitz projection eyepieces of this magnification carry several different markings. You will find "Proj.-Ok. H4x", "Proj.-Ok. P4X" and - as on the item offered here - simply "Proj. 4x". The letter H stands for the Huygens design. Leitz also made projection eyepieces of other magnifications, 2.5x among them, so the 4x version is not the only one in this family.

The eyepiece is intended for microscopes with a mechanical tube length of 170 mm. The older Leitz stands are corrected this way, Orthoplan, Ortholux, SM and SM-D among others. Later microscopes of this brand already work with a 160 mm tube. In Leitz optics of this generation part of the chromatic aberration correction is deliberately moved from the objective to the eyepiece, so matching an eyepiece to an objective is not merely a mechanical question here.

Despite its name, this eyepiece behaves differently from a typical projection eyepiece. It does not form a real image at a fixed distance, but projects the image to infinity - exactly like an ordinary viewing eyepiece. This makes it excellent for the afocal method, that is, photographing with a camera that keeps its own lens placed above the eyepiece. Leitz itself built its photographic adapters on precisely this method.

Leitz "Proj." eyepieces also found use outside microscopy. Eyepieces of this family were part of the microprojection attachments for the Leitz Prado and Pradovit projectors, which threw the image of a specimen onto a screen for a whole lecture room. If you are completing such an attachment, this is exactly the part.

Use in a microscope with a 160 mm tube length remains a matter of your own DIY modification. Mechanically the eyepiece fits any 23.2 mm seat, but the intermediate image is then formed in a different place, so focus and image scale will come out differently from what the manufacturer intended. There is, however, a route that gives a beautiful combination: into a microscope of another manufacturer you fit a Leitz Wetzlar objective computed for 170 mm, and this eyepiece above it. The optical path is then entirely Leitz - objective and eyepiece work as they were designed to, and only the stand remains foreign, a PZO or a Carl Zeiss Jena one for instance.

The "compatibility" section lists the microscope models this eyepiece can be used with, but that list is of course not complete. This projection eyepiece can be used with any microscope of any manufacturer, as long as it has a tube or another seat for an eyepiece of 23.2 mm diameter - subject to the difference between 160 and 170 mm tube length (I write about this above).

Description of this part for the microscope.

microscopes have a standardized mount of 38 mm diameter into which various tubes can be fitted. One of exactly these tubes is presented here.

Basic parameters of the tube presented here:
Markings on the housing: "Germany" on one side and "30ø" on the other side
Mounting connection: a plain tube (cylinder). This is not a tube with a thread or a dovetail
Mounting diameter: 38 mm, that is the standard mounting diameter used in Leitz Wetzlar trinocular heads
Internal optics: none - this tube has no optics inside
Internal diameter: the tube has an internal diameter of 30 mm, so that a projection eyepiece of exactly that diameter can be fitted inside

The trinocular heads this tube fits are used among others in the following microscopes:
- Leitz Wetzlar Orthoplan
- Leitz Wetzlar Diaplan
- Leitz Wetzlar Ergolux
- Leitz Wetzlar Dialux
- Leitz Wetzlar Laborlux
- Leitz Wetzlar SM-LUX
- Leitz Wetzlar Ortholux II
- Leitz Wetzlar Aristoplan
- Leitz Wetzlar HM-LUX

This is not a tube for one particular microscope model. A trino head can be mounted not only on the microscope it was sold with, so the correct assumption is that this is a standard tube for Leitz Wetzlar trinocular heads - and those can be used on most microscope models of this company.

The last photo in the gallery shows what this tube looks like with a 30 mm eyepiece fitted.

The "compatibility" section lists example microscopes this tube fits, although the list is not complete.