Webpage www.microscopeparts.eu - sale of original, used and refurbished service, repair, and replacement parts for student, biological, laboratory, measuring, toolmakers, and stereo microscopes. Mail order.

Photos	PartIndex	Short name	Part name	Description	Number of pieces	Price	Category	Manufacturer	It comes from	Compatible with	Why do you need this?	Added ↑
296 - Thumbnail photo showing this microscope part. PZO MB-30 microscope condenser support (PZO ML-5 condenser holder) - thumbnail [ 00035 ]	SERMIK_ID number under which this microscope part is placed in the database. 00035	PZO MB-30 microscope condenser support (PZO ML-5 condenser holder)	The name of this microscope part. PZO MB-30 microscope condenser support (PZO ML-5 condenser holder)	Description of this part for the microscope. - 39.5 mm diameter condenser holder with a condenser holding screw - knob for adjusting the vertical position of the condenser (top-bottom) - central condenser ... mounting screw - two long screws for centering the condenser This part is compatible with the following PZO microscopes: - MB 30 - MB 30S - MS 5 - ML 4 - ML 5 - ML 6 Note - This part is BLACK. Please note that the microscopes it is compatible with may have different paint colors. Note - This part is from the PZO MB-30 microscope, so it has long screws for centering the condenser. It differs from the condenser holders of the MS and ML models in these screws; i.e., the MS and ML do not have such long screws for centering the condenser. Users of PZO MS and PZO ML series microscopes often replace their condenser holder with the one in the MB-30 to easily center the condenser, which is especially convenient when using the condenser for phase contrast. Note - the gear rack on which this mechanism moves is NOT included in the kit. If you need smaller, individual components of this module (e.g., a gear knob, centering screws, or anything else) - contact us Names, descriptions, terms, and search contexts under which this part is searched. PZO MB-30 microscope repair parts Progress M-9 (Lomo M9) microscope condenser support with screw and filter holder. trzymak kondensora (uchwyt i śruba) z uchwytem filtra mikroskopowego i pokrętłem regulacji wysokości (góra - dół). Kondensorhalter (Halter und Schraube) mit Mikroskopfilterhalter und Höhenverstellknopf (Mikroskop Kondensor u. Filter). Serwis naprawa zębatka smar wymiana smarów czyszczenie połamane nie działa wykrzywione. Wartung Reparatur Zahnrad Zahnstange Fett Schmierstoffwechsel Reinigung defekt nicht funktionsfähig verbogen Neufetten. Service repair rack pinion grease lubricant change cleaning broken not working bent condenser holder kondensor halter condenser support PZO MB-30 PZO MB30 PZO MB 30 PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Condenser holders (supports)	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MB-30 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MB-30 ML4 ML5 ML6 MS6 MB 30S	A list of potential uses for this part and when it might be needed. As a service part individual components in this mechanism often become damaged the screw holding the condenser sometimes gets lost, bent, or breaks (and remains in the thread) sometimes the knob (handle) is chipped or even melted by a soldering iron or cigarette if you have a PZO MS or ML series microscope and want to upgrade it with a condenser holder with convenient centering screws	0000-00-00 00:00:00
297 - Thumbnail photo showing this microscope part. PZO MB-30 / PZO ML microscope coarse focusing block with knobs - thumbnail [ 00037 ]	SERMIK_ID number under which this microscope part is placed in the database. 00037	PZO MB-30 / PZO ML microscope coarse focus block	The name of this microscope part. PZO MB-30 / PZO ML microscope coarse focusing block with knobs	Description of this part for the microscope. Focusing block for PZO microscopes: - MB 30 - MB 30S - ML 4 - ML 5 - ML 6 NOTE - IMPORTANT - This block does not include a fine (micro) feed ... mechanism. This block only includes a coarse (macro) feed mechanism. More specifically, if such a block were complete, it would also include a fine (micro) feed module. This module is simply not included in the unit offered here. Therefore, it is an attractive component for those looking to repair a coarse (macro) feed. - Black focusing block - Coarse (macro) feed gear system - Coarse (macro) feed knobs - Coaxial fine (micro) feed knobs - Tension adjustment mechanism The tension adjustment mechanism is a very important component of a microscope. The PZO MB-30 and ML series microscopes move the entire column (the entire arm) up and down, and this resistance adjustment mechanism prevents the arm from lowering itself if additional components are installed, such as a DIC head or a camera on a trinocular head (as they constitute additional weight). If you need a precise (micro) movement mechanism, which is missing here, if you need a complete focusing block, or if you need individual components from this block (e.g., a single gear or just the knobs), please contact us Names, descriptions, terms, and search contexts under which this part is searched. PZO MB-30 microscope repair parts PZO MB-30 mikroskop microscope focusing block blok fokusujący mechanizm makro mechanizm mikro pokrętła gałki ruch zgrubny ruch precyzyjny fine focus coarse focus feintrieb grobtrieb focus block fokus blok MB30 MB 30 ML4 ML5 ML6 ML 4 ML 5 ML 6 ML-4 ML-5 ML-6 MB-30 PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Focusing blocks	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MB-30 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MB-30 ML4 ML5 ML6 MB 30S	A list of potential uses for this part and when it might be needed. as a service part to replace the macro mechanism if you only need individual gears if you only need knobs if you need a stop mechanism, as the knob used to adjust it breaks very often	0000-00-00 00:00:00
379 - Thumbnail photo showing this microscope part. PZO MB-30 field diaphragm and light collector lens - thumbnail [ 00803 ] video	SERMIK_ID number under which this microscope part is placed in the database. 00803	PZO MB-30 field diaphragm and light collector lens	The name of this microscope part. PZO MB-30 field diaphragm and light collector lens	Description of this part for the microscope. Here I offer the illumination module block from the microscope base (known as the "metal tube"). The complete illumination system in the PZO MB-30 / MB- ... 30S microscope base consists of: - an illuminator (light source) - a "tube" containing a collimating lens and a field diaphragm - a screw securing the tube - an angle mirror that reflects light at 90 degrees Two components of this tube are offered here: - a metal tube with a lens collimating the illumination beam - a metal tube with a field diaphragm (iris diaphragm) There are two critical components here: the collimating lens, which often cracks under temperature, and the field diaphragm, whose blades are prone to bending. Names, descriptions, terms, and search contexts under which this part is searched. PZO MB-30 microscope repair parts PZO MB-30 mikroskop microscope iris diaphragm irisblende blende feld feldblende field diaphragm licht collimation lens licht kollimation linse soczewka kolimująca oświetlenie światło przysłona polowa PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Iris diaphragms	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MB-30 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MB-30 MB 30S	A list of potential uses for this part and when it might be needed. when the field diaphragm is damaged. when the light collimating lens is damaged.	2026-01-23 00:00:00
391 - Thumbnail photo showing this microscope part. PZO MB-30 / ML rack for the microscope condenser vertical focusing mechanism - thumbnail [ 00032 ]	SERMIK_ID number under which this microscope part is placed in the database. 00032	PZO MB-30 / ML microscope condenser vertical focusing mechanism	The name of this microscope part. PZO MB-30 / ML rack for the microscope condenser vertical focusing mechanism	Description of this part for the microscope. Gear rack (toothed rack) - a service part of the vertical movement mechanism of the microscope condenser. This is not a 3D print - it is an original part ... manufactured by PZO and removed from the PZO MB-30 microscope. Compatible with the following microscopes: - PZO MB-30 / MB-30S - PZO ML4 / ML5 / ML6 I need to check if it fits the PZO MS series microscopes. Names, descriptions, terms, and search contexts under which this part is searched. PZO MB-30 microscope repair parts Makro mikro macro micro focusing vertical movement Feintrieb Grobtrieb Zahnrad Zahnstange Zahnrohr PZO MB-30 Mikroskop rack pinion listwa zębata koło zębate zębatka pokręto sterowanie podnoszenie Coarse focus element microscope condenser Mikroskop Kondensor. PZO MB-30 microscope Serwis naprawa zębatka smar wymiana smarów czyszczenie połamane nie działa wykrzywione. Wartung Reparatur Zahnrad Zahnstange Fett Schmierstoffwechsel Reinigung defekt nicht funktionsfähig verbogen Neufetten. Service repair rack pinion grease lubricant change cleaning broken not working bent. PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MB-30 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MB-30 ML4 ML5 ML6 MB 30S	A list of potential uses for this part and when it might be needed. as a service part	2026-01-25 00:00:00
398 - Thumbnail photo showing this microscope part. PZO SK8 microscope mechanical stage - knobs (handwheels) and worm shaft - thumbnail [ 00966 ]	SERMIK_ID number under which this microscope part is placed in the database. 00966	PZO SK8 microscope mechanical stage - knobs (handwheels) and worm shaft	The name of this microscope part. PZO SK8 microscope mechanical stage - knobs (handwheels) and worm shaft	Description of this part for the microscope. This is a service part for the PZO SK8 mechanical microscope stage. It consists of a set of knobs and a horizontal worm shaft with a handle and screws. ... This part is often damaged in PZO SK8 microscope stages: because the knobs extend beyond the microscope's outline after installation, the worm shaft often bends during transport, making it difficult to straighten properly. The PZO SK8 is a mechanical microscope stage with horizontal knobs, primarily used in PZO MB30 microscopes, ML series models, and PZO MST-130/131 stereo microscopes - but is also sometimes installed in Studar and Biolar models. Names, descriptions, terms, and search contexts under which this part is searched. PZO SK8 mechanical stage microscope repair parts PZO SK-8 mechanical stage stolik mikroskopowy PZO PZO MB-30 Mikroskoptisch SK8 PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 20 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. SK8 mechanical stage Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. SK8 mechanical stage Biolar Studar MB-30 ML4 ML5 ML6 MST-130 Biolar FL MB 30S MB-10	A list of potential uses for this part and when it might be needed. as a repair part. The main reason for the need for replacement is stated in the description	2026-01-26 01:29:52
782 - Thumbnail photo showing this microscope part. PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x - thumbnail [ 99335 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99335	PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x	The name of this microscope part. PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x	Description of this part for the microscope. Polarization-interference microscope objective by PZO Basic parameters: Manufacturer: PZO Poland Model: 10/0,24 PI 160/- Magnification: ... 10x Correction: Achromat Numerical aperture: 0.24 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS Info: PI = polarization-interference objective (red ring). Compatible with the following PZO condensers: - PZO KPI 2 - slit condenser PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC). VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference. In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL. Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true. DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this. It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO Biolar DIC microscope repair parts PZO Biolar DIC PI polarisation-interferenz Mikroskopobjektiv PZO UPI Pluta polarisation interference microscope objective obiektyw PZO polaryzacyjno-interferencyjny PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolar DIC Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolar DIC Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you have an incomplete PZO UPI DIC set missing this exact objective and want to complete it if you need a polarization-interference objective for your own purposes if you have such an objective but it is of very poor quality or damaged if you want to keep such an objective as a spare	2026-04-16 23:37:42
805 - Thumbnail photo showing this microscope part. PZO 5xH microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 99371 ]	SERMIK_ID number under which this microscope part is placed in the database. 99371	PZO 5xH microscope eyepieces 23,2 mm (pair)	The name of this microscope part. PZO 5xH microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Pair (two pieces) of microscope eyepieces. Manufacturer: PZO Magnification: 5x Model: PZO 5xH Type: Huygens Mounting Diameter: 23.2 mm These ... eyepieces can be used with microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO Studar microscope repair parts PZO Biolar microscope eyepieces PZO Studar Mikroskop Okulare okulary mikroskopowe PZO Huygens Mikroskopokulare PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 10	Price in EURO for 1 piece of this microscope part. Price is negotiable. 19 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Studar Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studar Biolar MB-30 MS4 ML4 ML5 ML6 MS6 MST-110 MST-127 MET-3 Biolar FL MNT-6 Trinocular Photo Head MND-4 Binocular Head MNJ-4 Mono Head (monocular) MinO M-100 M-110 M-200 M-440 More [...] MS-16 MS-2 MB 30S MB-10 MB-30 FL MND-5 ML1 ML2 MND-6 Biolar DIC Lg Lr Lu Lumipan Nf NfPk Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Amplival Ergaval Vertival Epival Metaval Fluoval Epityp-2 Epignost BH-2 BHS CK2 BHA CH CH-2 CHT BHM BH-2 BHTU SC TMS M20 MPD-1 MICMED-2 MBB-1 Biolam M-9 Biolam D11 MBI-1 AU-26 binocular head MBR-3 MBP-1 Erudit Biolam 70 ID 02 Zeiss Standard microscope binocular head Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope Standard Junior KF 2 Ultraphot DD 37 BN DRU-3 RU2 Biorom ML-4M MC-7 MC-6 Vintage Monocular Studio C CN-fl Primus Superpan Labopan Metall Studio II CN-hf V200 V100 V300 Dialux Aristomet HM-LUX 3 Laborlux S Laborlux 11 Pol S Trichinenmikroskop SM-LUX Ortholux II Orthoplan SM-D Metallux 3 Diaplan Model B.Y. Microbe Hunter Model S Model M.Y. Model C.Y.N. Neozet Zetopan Biopan Neopan Novex K-Range Kolleg SH45 M2240 Collegiate 400 M4000-D Eleven Ninety UFA 626 UFD 121 UFD 122 Microsystem 70 M72 M15 M70 Patholux Patholette 1036a One-Fifty One-Ten Diamax Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you want to replace your poor-quality eyepieces	2026-04-23 18:53:13
806 - Thumbnail photo showing this microscope part. PZO 15x microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 99372 ]	SERMIK_ID number under which this microscope part is placed in the database. 99372	PZO 15x microscope eyepieces 23,2 mm (pair)	The name of this microscope part. PZO 15x microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Pair (two pieces) of microscope eyepieces. Manufacturer: PZO Magnification: 15x Mounting Diameter: 23.2 mm These eyepieces can be used with ... microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO Biolar microscope repair parts PZO Biolar microscope eyepieces PZO Studar Mikroskop Okulare okulary mikroskopowe PZO PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 20 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolar Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Studar Biolar MB-30 MS4 ML4 ML5 ML6 MS6 MST-110 MST-127 MET-3 Biolar FL MNT-6 Trinocular Photo Head MND-4 Binocular Head MNJ-4 Mono Head (monocular) MinO M-100 M-110 M-200 M-440 More [...] MS-16 MS-2 MB 30S MB-10 MB-30 FL MND-5 ML1 ML2 MND-6 Biolar DIC Lg Lr Lu Lumipan Nf NfPk Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Amplival Ergaval Vertival Epival Metaval Fluoval Epityp-2 Epignost BH-2 BHS CK2 BHA CH CH-2 CHT BHM BH-2 BHTU SC TMS M20 MPD-1 MICMED-2 MBB-1 Biolam M-9 Biolam D11 MBI-1 AU-26 binocular head MBR-3 MBP-1 Erudit Biolam 70 ID 02 Zeiss Standard microscope binocular head Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope Standard Junior KF 2 Ultraphot DD 37 BN DRU-3 RU2 Biorom ML-4M MC-7 MC-6 Vintage Monocular Studio C CN-fl Primus Superpan Labopan Metall Studio II CN-hf V200 V100 V300 Dialux Aristomet HM-LUX 3 Laborlux S Laborlux 11 Pol S Trichinenmikroskop SM-LUX Ortholux II Orthoplan SM-D Metallux 3 Diaplan Model B.Y. Microbe Hunter Model S Model M.Y. Model C.Y.N. Neozet Zetopan Biopan Neopan Novex K-Range Kolleg SH45 M2240 Collegiate 400 M4000-D Eleven Ninety UFA 626 UFD 121 UFD 122 Microsystem 70 M72 M15 M70 Patholux Patholette 1036a One-Fifty One-Ten Diamax Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you want to replace your poor-quality eyepieces	2026-04-23 19:35:13
934 - Thumbnail photo showing this microscope part. PZO microscope objective plastic container RMS - thumbnail [ 99374 ]	SERMIK_ID number under which this microscope part is placed in the database. 99374	PZO microscope objective plastic container RMS	The name of this microscope part. PZO microscope objective plastic container RMS	Description of this part for the microscope. Plastic microscope objective case made by PZO. Case parameters: Material: plastic Length: suitable for DIN-45 objectives or shorter Diameter: not ... intended for so-called "thick" objectives Thread in the cap: no, the cap of this objective case does not contain a thread for attaching an RMS objective This objective case can be used to store so-called "short" objectives (DIN 33 mm), longer objectives (DIN 37 mm), and long objectives (DIN 45 mm), provided they are not the so-called "thick" type. For PZO objectives, it can accommodate all standard achromatic objectives as well as all phase contrast objectives. Some unusual PZO microscope objectives do not fit inside, for example the 100x PI objective (with a red ring). Various names are used on the secondary market for a microscope objective case, including: - objective case - microscope objective case - objective container - microscope objective container - objective storage case - objective storage container - objective box - objective storage box - protective objective case - objective lens case - objective lens container - dust protection case - transport case for microscope objectives - microscope objective holder case - storage canister for microscope objectives Each case has the PZO logo on its cap. Caps may be black, white, or grey. Although this case is of greatest interest to users and collectors of objectives made by the Polish manufacturer PZO, it can of course be used to store objectives from any manufacturer. Names, descriptions, terms, and search contexts under which this part is searched. PZO Biolar microscope repair parts PZO Mikroskop Objektivbox PZO Mikroskop Objektiv Schutzbox PZO microscope objective box PZO microscope objective container case PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 45	Price in EURO for 1 piece of this microscope part. Price is negotiable. 3 €	Name of the category to which this microscope part is classified. Accessories	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolar Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolar Biolar DIC Studar MB-30 MS4 ML4 ML5 ML6 MS6 MB 30S MB-10 M-440	A list of potential uses for this part and when it might be needed. if you need an empty objective case to protect your objectives from dust or mechanical damage	2026-06-08 02:19:45

Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Advanced search

Main table with a list of microscope parts

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.