Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

field lens (Zeiss P/N 47 30 68). It can be installed in the tube between the objective nosepiece and the observation head. The lens is operated by a lever protruding from the side of the tube. In the manufacturer's documentation, this lever is referred to as "Switch to turn axis, e.g. with wide field changer 0.8x-1x". If this optional microscope component is not installed, the opening intended for the lever is closed with a plastic blanking plug additionally secured by a retaining screw. This listing includes exactly that end cap and screw.

This particular cover was removed from a Zeiss Standard 14 microscope, which is not normally equipped with the lever-operated lens. However, it will most likely fit the majority of other Standard series models, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89

The blanking plug itself carries the catalog number Zeiss 47 30 65 (alternative notation: Zeiss 473065) and is described as an "intermediate tube cover element".

Not only is this plastic cap frequently lost over the years, but the lever itself or the lens assembly may also become damaged and require removal. In such cases, this blanking plug should be installed to protect the microscope optics from dust.

In the last photographs in the gallery, I use arrows to show exactly which microscope component is being offered and where it is located within the microscope.

Description of this part for the microscope.

This is a round plastic cap with a metal insert, designed to cover the output port of the EPI illuminator. It is removed when an EPI fluorescence illuminator turret is installed (for example, on the Zeiss Photomicroscope III RS).

Please note that some versions of the Zeiss Universal microscope do not have an EPI reflected-light illuminator port.

The accompanying video, using a Zeiss Photomicroscope II as an example, shows exactly where this cap is located on the microscope and how it is installed and removed.

On the secondary market, many Zeiss Phomi (Photomicroscope) and Zeiss Universal microscopes are missing this cap. As a result, dust can enter the illumination system (in other words, the light path). Why is this cap often missing?
- first, it can be removed very easily, so over the years it may simply get lost
- secondly, the microscope body and the EPI fluorescence illuminator turret are often sold separately, so after the turret has been removed, the EPI illuminator port remains uncovered

Description of this part for the microscope.

Photomicroscope (Phomi) microscopes.

This cover ring contains a small screw that secures the ring in place so that it fits tightly around the joint between the two microscope components.

The accompanying video, using a Zeiss Photomicroscope II as an example, shows exactly where this cover ring is located on the microscope and how it is installed and removed.

On the secondary market, many Zeiss Phomi (Photomicroscope) and Zeiss Universal microscopes are missing this cover ring, which may allow dust to enter the optical system. Why is this cover ring often missing?
- first, it can be removed very easily, so over the years it may simply get lost
- secondly, the microscope body and the trino intermediate tube are often sold separately, so this cover ring frequently ends up being included in neither the first transaction nor the second

Description of this part for the microscope.

the front, in the centre of the binocular head, between the two eyepiece tubes. It is a round cover plate (end cap) carrying a scale from 55 to 75 indicating the interpupillary distance (eyepiece tube spacing).

The last photograph in the gallery shows the complete binocular head. An arrow indicates the exact component being offered and its location within the head, allowing it to be identified unambiguously.

This is a component of the binocular head rather than a component dedicated to a particular microscope model.

This component fits 30 mm eyepiece binocular heads used, among others, on the following microscopes:
- Carl Zeiss Jena Jenamed
- Carl Zeiss Jena Jenalab
- Carl Zeiss Jena Jenaval
- Carl Zeiss Jena Jenatech
- Carl Zeiss Jena Jenalumar
- Carl Zeiss Jena Jenavert

Some Carl Zeiss Jena Jenalab and Jenamed microscopes (for example the Jenamed Fluorescence) were factory-equipped with binocular heads accepting 23.2 mm eyepieces. In that case this end cap is **not** compatible with that binocular head. By "that" I specifically mean the binocular head, as this is a component of the head rather than of the microscope itself.

Interestingly, 30 mm wide-field binocular heads are also occasionally fitted to older microscopes from the Mikroval series (for example Ergaval and Amplival). When combined with GF-Planachromat or GF-Planapochromat objectives (the latter also used on the Docuval), this provides arguably the best optical combination available for Carl Zeiss Jena microscopes with a 160 mm tube length.

The Carl Zeiss Jena wide-field binocular head for 30 mm eyepieces is mechanically the same device as the Baader Mark V binocular viewer used with astronomical telescopes. They are based on the same binocular head; the Baader Mark V differs only in having a modified mounting interface, astronomical eyepiece adapters and, in some versions, different external markings. Consequently, the component offered here is also compatible with the Baader Mark V binocular viewer.