Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

Description of this part for the microscope.

M25 (not M32) threaded objectives, so you can also use Carl Zeiss Jena M25 objectives from Jenamed, Jenaval, Jenalumar, and Jenalab microscopes.

Description of this part for the microscope.

Description of this part for the microscope.

M30
Mounting method: dovetail

Most likely compatible with the IOR MC-7 (MC7) microscope

Description of this part for the microscope.

Nf
- Ng
- Lg
- Lr
- Lu
- Lumipan

and
- Lomo Biolam
- Bresser Biolam
- Lomo MBB-1A
- and some IOR Bucuresti

have interchangeable objective turrets. This is an excellent solution for storing, using, and quickly replacing entire sets of objectives. For example, you can have separate turrets already equipped with a complete set of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Therefore, having only one microscope we can use it for different purposes and not screw in and unscrew all the lenses manually each time.

Description of this part for the microscope.

The glossy version was most commonly used in Eduval and Laboval microscopes, while the matte version was used in Laboval-2 and Laboval-3 microscopes - but they are compatible.

Note ? this model DOES NOT FIT Eduval-4 and Laboval-4 microscopes.

Description of this part for the microscope.

glossy version was most commonly used in Eduval and Laboval microscopes, while the matte version was used in Laboval-2 and Laboval-3 microscopes ? but they are compatible.

Note ? this model DOES NOT FIT Eduval-4 and Laboval-4 microscopes.

Description of this part for the microscope.

Description of this part for the microscope.

an eyepiece tube holder

This is the element that moves vertically to adjust the focus. The kit does not include a rack ( =- LINK -= ) - I won't describe what's missing - just take a close look at what's included. The most important element of this module is the turret.

Description of this part for the microscope.

black Carl Zeiss Jena microscopes
- Nf
- Ng
- Lg
- Lr
- Lu
- Lumipan

as well as newer, gray Carl Zeiss Jena
- Ergaval
- Amplival
- Fluoval
- Epival
- Interphako
- Vertival
- and other variants

and
- Lomo Biolam
- Bresser Biolam
- Lomo MBB-1A
- and some IOR Bucuresti

have an interchangeable objective turret.

This is an excellent solution for owning, using, and quickly replacing entire sets of objectives.

For example, you can have separate turrets already equipped with a complete set of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Therefore, having only one microscope we can use it for different purposes and not screw in and unscrew all the lenses manually each time.

Description of this part for the microscope.

for storing, using, and quickly replacing entire sets of objectives.

For example, you can have separate turrets already equipped with the following sets of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Thanks to this , having only one microscope, we can use it for various purposes and not screw in and unscrew all the lenses manually each time.

Basic parameters:
Model: PZO RO5
Thread: RMS
Number of slots: 5
Mounting method: dovetail
Variant: glossy | mirror-finish

Description of this part for the microscope.

microscope here.

- Ploemopak
- Revolver for four RMS objectives
- Carousel with excitation filters
- Built-in barrier filter cubes in the turret
- Built-in iris diaphragm (*)
- Mounting adapter for the arm

(*) The iris diaphragm opens and closes nicely, but when I look at it, I'm not entirely sure if it's assembled correctly. However, it works very well.

All filters and mirrors are functional, with no delamination.

Description of this part for the microscope.

darkfield objectives.

Number of ports: 4
Objective thread: M25
Objective type: Olympus NEO
Mounting method: Dovetail

I've also used the Olympus BHM microscope with Carl Zeiss Jena M25 thread objectives (Jenaval microscope objectives), and they fit and work very well :-)

I'm almost certain (but I haven't checked) that this turret fits the Olympus BH model (but not the BH-2), which has a turret for RMS objectives by default. However, it can be swapped out and work with an M25 objective :)

Description of this part for the microscope.

them out, instead of unscrewing each objective individually.

More information: here .

Lomo Polam comparision table.

Lomo Polam Manual .

Description of this part for the microscope.

it a single-objective non-revolving nosepiece.

Description of this part for the microscope.

(471710)

This turret mounts with a dovetail joint, allowing you to quickly swap out entire sets of objectives without having to unscrew them individually if you have more than one turret.
This allows you to have a complete set of low-power objectives on one turret and a complete set of high-power objectives on the other, quickly swapping them as needed.

Description of this part for the microscope.

For example, you can have a single Vickers Patholux microscope and separate revolvers already fitted with such objective sets:
- low-magnification objectives for observing macro objects with EPI illumination, without a cover slip (e.g., 2.5x / 3.2x / 5x / 8x)
- objectives for phase contrast; for different phase contrasts: positive, anoptral, variable, amplitude, Zernike
- DIC objectives
- water immersion objectives (e.g., by Lomo)
- all oil immersion objectives (e.g., Leitz 10x Oil, 25x Oil, 40x Oil, and 100x Oil)
- apochromatic objectives for better colors
- polarization objectives
- high-magnification objectives, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- dark-field objectives (objectives with an iris diaphragm inside)

This way, having only one microscope, you can use it for various purposes without manually screwing and unscrewing all objectives piece by piece every time.

Description of this part for the microscope.

for storing, using, and quickly replacing entire sets of objectives.

For example, you can have separate turrets already equipped with the following sets of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Thanks to this , having only one microscope, we can use it for various purposes and not screw in and unscrew all the lenses manually each time.

Basic parameters:
Model: PZO RO5
Thread: RMS
Number of slots: 5
Mounting method: dovetail
Variant: matte

Description of this part for the microscope.

Installed in the objective turret in the upper part of the stand.

In the manufacturer's catalog from June 2025 (https://downloads.leica-microsystems.com/DM6%20M/Product%20Configuration%20%26%20Tech%20Specs/Leica_DM4_6BMP_Modular_System_V2025_06.pdf) this element is described on page 6, Fig. 9 and again on page 17, Fig. 34.

Basic technical data:
- Manufacturer: Leica
- Part number: 11555071
- Type: motorized disk with mounts for DIC disks
- Number of positions: 4; 1 blank + 3 for disks
- Compatibility: Leica DM6000 B and Leica DM6000 M

Description of this part for the microscope.

Eclipse Ci
- Eclipse 50i
- Eclipse 55i
- Eclipse 600 (E600)
- Eclipse 800 (E800)
- Eclipse 80i
- Eclipse 90i

Basic parameters and technical data:
Element: microscope objective nosepiece
Manufacturer: Nikon
Manufacturer catalog part number: MBP71316
Manufacturer catalog designation: C-N6
Number of objective positions: 6
Thread: M25
Mounting method: dovetail

The nosepiece is mounted using a dovetail connection. This allows users who have more than one nosepiece to quickly exchange complete sets of objectives without removing them individually.
This makes it possible, for example, to keep a full set of low-magnification objectives on one nosepiece and a full set of high-magnification objectives on another, and quickly switch between them depending on current needs.

Description of this part for the microscope.

black Carl Zeiss Jena microscopes
- Nf
- Ng
- Lg
- Lr
- Lu
- Lumipan

as well as newer, gray Carl Zeiss Jena
- Ergaval
- Amplival
- Fluoval
- Epival
- Interphako
- Vertival
- and other variants

and
- Lomo Biolam
- Bresser Biolam
- Lomo MBB-1A
- Lomo MBI-1
- Lomo MBR-3
- and some IOR Bucuresti

have an interchangeable objective turret.

This is an excellent solution for owning, using, and quickly replacing entire sets of objectives.

For example, you can have separate turrets already equipped with a complete set of objectives:
- low magnification for observing macro objects with side illumination, without a cover glass (e.g., 2.5x / 3.2x / 5x / 8x / 10x)
- for phase contrast
- for various phase contrasts (positive, anoptral, amplitude, Zernike)
- for DIC
- for water immersion (e.g., Lomo)
- all for oil immersion (e.g., Leitz 10x Oil / 25x Oil / 40x Oil / 100x Oil)
- apochromatic for better color
- for polarization
- only high magnifications, e.g., for analyzing cell wall ornamentation (50x / 63x / 80x / 100x)
- for darkfield work (objectives with an iris diaphragm in the center)

Therefore, having only one microscope we can use it for different purposes and not screw in and unscrew all the lenses manually each time.

This is the newest, matte version of the objective revolver. If you're looking for the glossy version, see here: https://www.microscopeparts.eu/00736.

Description of this part for the microscope.

Mounting method: screw-mounted

Note: this nosepiece does not fit the Carl Zeiss Jena Jenalumar microscope. Although most components between these models are interchangeable - the objective nosepiece is not.

Cast or injection-molded metal parts of Carl Zeiss Jena carry their own numbers. This microscope element bears the number 2643 (full designation: Si10 CZ 2643).

Description of this part for the microscope.

Number: P/N 453125 (45 31 25)
- Mounting method: screw-mounted

Description of this part for the microscope.

Jenamed Cytology
- Jenamed Hematology
- Jenamed Histology
- Jenamed-2
- Jenamed Fluorescence

Basic parameters:
- Number of objective positions: 5
- Thread: M25
- Mounting method: integrated with a larger block attached to the microscope body using screws

Yes - the "click-stop" detent mechanism (German: Blattfeder) is included, as it is frequently damaged in this model.

Metal cast or injection-moulded parts made by Carl Zeiss Jena have their own numbers. This part carries the number: 2708 (full marking: Si10 CZ 2708).

Please note - the small block with slots for microscope sliders, attached to this revolver and bearing the number Si10 CZ 2709/2, is available separately.

In the last photo I indicate with an arrow exactly which element it is and where it is located in the microscope.

Description of this part for the microscope.

type: RMS
Centering: yes, each objective can be centered independently (a special key / tool is required)
Mounting method: the nosepiece is attached to the microscope body using screws

In the last photo, an arrow indicates which element is being offered and where it is located in the microscope, allowing this part to be identified unambiguously. Additionally, the attached video shows the movement mechanism of this nosepiece.

Description of this part for the microscope.

microscope was equipped with objective nosepieces featuring a glossy surface (it may be described as a mirror-like surface). Newer Zetopan microscopes have matte nosepieces (they may be described as silver or gray). Here I present and offer a newer matte (gray) nosepiece.

Information from the manufacturer's English-language catalogue "Zetopan Research Microscope. Price List, Effective December 1, 1976":
- Catalogue number of this part: 9 03 12 05
- English name of this part: Quadruple nosepiece, on slider

When new Reichert Austria Zetopan microscopes were purchased with additional equipment (phase contrast or fluorescence), the manufacturer often supplied the microscope from the factory with two or three nosepieces (for example a dedicated nosepiece fitted with phase contrast objectives) - even 6-position versions!

The objective positions originally installed in each thread are engraved on the nosepiece presented here: 4 / 10 / 40 / 63. This is only a recommendation and any objectives may be screwed into these positions.

Important: the visually very similar black Reichert Neozet microscope uses a DIFFERENT objective nosepiece mounting system. The nosepiece from the Reichert Zetopan microscope is not compatible with the Reichert Neozet microscope.

Why is this the microscope part that every user should own in several examples?

Reichert Zetopan microscopes - both the older black models, the silver models and the latest cream-colored models - feature an interchangeable objective nosepiece. This is an excellent solution that allows complete sets of objectives to be owned, used and exchanged very quickly.

For example, you may have separate nosepieces already fitted with objectives:
- a set of low magnification objectives for observing macro objects with side illumination and without a cover glass (for example 2.5x / 3.2x / 5x / 8x)
- a complete set of objectives for phase contrast
- even different sets of objectives for different phase contrast techniques (positive, anoptral, amplitude, Zernike)
- a set of objectives for water immersion work, for example good and inexpensive Lomo objectives
- a set of objectives that all operate with oil immersion, for example Leitz Wetzlar 10x Oil / 25x Oil / 40x Oil
- a complete set of apochromatic objectives for obtaining better color reproduction
- a set of "P / Pol" objectives for polarization
- a complete set of objectives with only high magnifications, for example for analysis of cell wall ornamentation (50x / 63x / 80x / 100x)
- a set for dark field microscopy (objectives with an iris diaphragm inside)

Thanks to this, having only one microscope, we can use it for many different purposes without having to screw in and unscrew all objectives manually one by one every time.

Interestingly, regardless of the country (!) users often use English terms when referring to an objective nosepiece. The most common are:
- revolver
- objective nosepiece
- objective turret
- objective carousell

Description of this part for the microscope.

nosepiece.

This holder is compatible with the following polarizing microscopes:
- Lomo Polam L-211
- Lomo Polam L-213
- Lomo Polam LMPR

The microscope models listed above are equipped with a removable 5-position objective nosepiece that can be removed and replaced with this single objective holder. A single-objective configuration has long been a standard solution in polarizing microscopy, and many users still prefer it today.

Simpler models, such as the Lomo Polam C-111 (Latin transcription S-111) and P-111 (Latin transcription R-111), do not have a removable objective nosepiece. Therefore, this holder is not compatible with those models.

Important:
The objective is not screwed directly into this holder. This holder does not have an RMS thread. It accepts objectives that have already been mounted in dedicated centering adapters. These adapters provide the precise objective centering required for polarizing microscopy.

The manufacturer illustrates this holder in Figure 4 of the instruction manual (item 47) and refers to it as щипцовое устройство (shchipcovoe ustrojstvo - pincer device).

Several names are commonly used for this component in documentation and among microscope users, including:
- single objective holder
- single objective mount
- objective holder
- objective clamp
- objective carrier
- pincer holder
- single objective nosepiece
- objective socket
- the English term "single objective microscope nosepiece" is very commonly used, even though it is technically associated with a revolving nosepiece

If you need additional comparison photographs, this database also contains:
- the 5-position objective nosepiece for this microscope model (part number 00798)
- the centering adapter for a single RMS objective (supplied together with the objective as part number 00772)

Description of this part for the microscope.

positions: 6
- Thread: M25
- Mounting method: screw-mounted to the intermediate bracket (nosepiece holder), between the nosepiece and the microscope body

The complete objective nosepiece module for Carl Zeiss Jena Jenalumar or Jenaval microscopes consists of:
- the objective revolver (also called the objective nosepiece, nosepiece disc or objective turret)
- the intermediate mounting bracket (nosepiece holder).

In both microscope models, the Carl Zeiss Jena Jenalumar and the Carl Zeiss Jena Jenaval, the first component—the objective revolver—is identical and interchangeable between the two models. Only the intermediate mounting bracket differs, as it attaches the revolver to the microscope arm. In other words, the nosepiece holder used in the Carl Zeiss Jena Jenalumar microscope is different from the one used in the Carl Zeiss Jena Jenaval microscope, but both holders have exactly the same objective revolver attached to them.

This offer includes only the objective turret, without the mounting bracket.

The gallery contains photographs of a Carl Zeiss Jena Jenalumar microscope arm, with the objective nosepiece indicated by an arrow to clearly show its location. It also includes photographs of the complete module consisting of the objective revolver and its holder for the Jenalumar microscope, making it clear how these two components are connected.

This database also contains, under item number 99388, the complete objective nosepiece module with its holder for the Carl Zeiss Jena Jenaval microscope.

Description of this part for the microscope.

117M microscope is a fairly good laboratory microscope manufactured at the Chinese NYO factory and sold worldwide under various names. These microscopes are known and sold, among others, as:
- Delta Optical Genetic Pro (mainly in Poland)
- AmScope B340 / T340 (mainly in the USA and the rest of the world through Amazon)
- Labtron LEM-C10 / C11 / C12 (mainly in the UK)
- Sigeta MB-207 (mainly in Ukraine)
- Boeco Germany BM-117 (mainly in Germany)
- BestScope BS-2020 (mainly in the USA, shipped worldwide)
- Brunel N117M (mainly in the UK)
- Apex N-117M (mainly in the UK)
- Surgifield SM-DN-117M (mainly in Nigeria and West Africa)
- Eurotech DN-117M (mainly in Peru)
- Biocare DN-117M (mainly in Peru)
- Viresa N-117M (mainly in Mexico)
- Eurolab DN-117M
- Nexcope N-117M
- Novel N-117M

This is certainly not a complete list – many sellers give the microscopes they sell their own names (just like Delta Optical in Poland). The best way to check whether this nosepiece fits your microscope is to compare the appearance of your microscope with the microscope from which this microscope part was removed (https://www.microscopeparts.eu/microscope/optical-n-117m-388).

The N-117M model has a binocular or trinocular head, while the DN-117M model has a built-in digital USB camera (hence the “D” at the beginning of the name, for “Digital”) – but the entire microscope body, and therefore the nosepiece as well, is identical in both models.