More about part: Leica DMLB / DMLS angle tube for P/N 501055 microscope binocular head (ID: 99446)
Leica DMLB / DMLS angle tube for P/N 501055 microscope binocular head
Main Photo
Description
Leica DMLB / DMLS angle tube for P/N 501055 microscope binocular headAngle tube, i.e. a part of the Leica 501055 microscope binocular head, most commonly used in Leica DM L-serie microscopes:
- Leica DMLS
- Leica DMLB
- Leica DMLM
This element provides an ergonomic, inclined positioning of the head relative to the user's eyes.
The element with manufacturer part number 501055 consists of two main parts:
- angle tube
- binocular head (also referred to as binocular).
Here, only the angle tube is shown and offered, without the binocular head.
Basic parameters:
- - mounting to microscope stand
- 44,5 mm dovetail
- - mounting of the head to the angle tube
- three screws
This angle tube can solve the following problems in Leica DMLB / DMLS microscopes:
- if the plastic housing of the angle tube from head P/N 501055 becomes damaged (for example cracked after a fall)
- if the internal prism inside the angle tube from head P/N 501055 becomes damaged: chipped, damaged by fungus, discolored or delaminated
- if the lower lens (from the microscope body side) or upper lens (under the binocular head) inside the angle tube from head P/N 501055 becomes damaged, scratched or loses its anti-reflection coating
Manufacturer
Leica - (Leica Microsystems GmbH) ➔ All parts
It comes from
Why do you need this?
- as a service part if the prism in the existing tube is damaged
- if you have a binocular head without an angle tube and want to mount it on a Leica DM L-serie microscope
- if you need an angle tube for your own DIY project
Compatibility
This microscope part is compatible with the following microscope models: