More about part: LOMO Biolam microscope blue frosted filter Ø 33 mm | MIN-8 and MBB-1A ground glass (ID: 92015)
Main Photo
Description
Lomo Biolam microscope blue frosted filter Ø 33 mm | MIN-8 and MBB-1A ground glassRound blue frosted glass / white-balancing diffuser for microscopes made by LOMO.
- Manufacturer
- LOMO (ЛОМО)
- Filter type
- blue frosted filter / ground glass with white balance
- Shape
- round - a disc-shaped filter
- Diameter
- 33 mm. YES - this is not a filter of the typical 32 mm diameter.
- One side
- frosted
- Other side
- glossy (smooth)
- Year of manufacture
- before 1977
In LOMO microscopes round filters are used for example:
- in the filter holders located under the condenser, for example in the LOMO KON-3, LOMO OI-14 or LOMO KF-4 condensers
- in filter holders inserted into EPI reflected-light illuminators, for example LOMO OI-21
- in external light sources (microscope lamps), for example LOMO OI-32 or LOMO OI-35
This is a filter that combines in itself the functions of a blue filter and of a frosted glass:
- a blue filter is used to turn the yellow, warm light of the bulb into light that is closer to white light
- a frosted filter (also called a diffuser or ground glass) is used to even out the light across the whole specimen area and to remove the visible image of the bulb filament
This does have its consequence however: without a visible filament it is not possible to work with illumination set up according to the Köhler method.
Very often only one or two microscope filters can be fitted in a microscope, for example one on the illuminator and the second in the holder under the condenser. The fact that the glass filter presented here is a 2-in-1 solution makes it possible to keep the possible second slot free for another filter.
Filters with a diameter of 33 mm are used in microscopes made by LOMO. This matters a great deal, because most manufacturers use filters with a diameter of 32 mm, and that one millimeter of difference decides everything: a 33 mm filter cannot be fitted into the filter holder of microscopes such as PZO, Carl Zeiss Jena or Leitz Wetzlar.
Manufacturer
Lomo - (Leningrad Optical Mechanical Association) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- if you need a good quality blue frosted glass filter for your LOMO microscope
Compatibility
This microscope part is compatible with the following microscope models, among others:
- Lomo MPD-1
- Lomo Biolam-I
- Lomo MBI-15
- Lomo MICMED-2
- Lomo MMU-3
- Lomo MIN-8
- Lomo MBB-1
- Lomo MBI-11
- Lomo Biolam-M
- Lomo Metam
- Lomo Biolam
- Lomo Lumam R1
- Lomo MIK-1
- Lomo Polam R-113
- Lomo Polam L-211
- Lomo Polam LMPR
- Lomo Polam R-311
- Lomo M-9
- Lomo Biolam D11
- Lomo MBI-1
- Lomo MIN-6
- Lomo MBR-3
- Lomo MIN-1
- Lomo Polam L-213
- Lomo MBP-1
- Lomo Erudit
- Lomo Biolam 70
- Lomo MIN-5
- Lomo MIN-4



