More about part: IO-T-USB2-Rev.2.2 USB interface electronic board module WAPOWEG000101-V2.5 | DFK41AU02 microscope camera Imaging Source (ID: 99962)
Main Photo
Description
Optical IO-T-USB2-Rev.2.2 USB interface electronic board module WAPOWEG000101-V2.5 | DFK41AU02 microscope camera Imaging SourceElectronic module of the USB interface on the IO-T-USB2 Rev 2.2 board (marking on the other side: WAPOWEG000101-V2.5) for the Imaging Source DFK41AU02 USB microscope camera or for your own DIY project.
USB microscope cameras in the so-called cube housings are built from several electronic modules connected to each other. These are usually universal modules from Chinese factories, which OEM manufacturers then use in their own products.
Here I offer exactly such a module, with the USB type B socket and the pin header on one side of the board and the connector for the next module on the other side. The board also carries a voltage regulator.
This part was taken out of an Imaging Source DFK41AU02 USB microscope camera, but it is quite possible that it also fits many other cameras or your own DIY electronics project.
Manufacturer
Optical - (Optical) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- as a spare part for repairing the Imaging Source DFK41AU02 USB microscope camera - by replacing the complete module
- if you need to repair another camera that uses such a module
- if you are looking for a ready-made board with a USB type B socket and a voltage regulator for your own DIY project
Compatibility
This microscope part is compatible with the following microscope models, among others:
- Optical model
- Imaging Source DFK41AU02 USB camera




