More about part: PZO Biolar DIC microscope MND-6 binocular head eyepiece diopter adjustment ring & right eyepiece prism (ID: 99212)
PZO Biolar DIC microscope MND-6 binocular head eyepiece diopter adjustment ring & right eyepiece prism
Main Photo
Description
PZO Biolar DIC microscope MND-6 binocular head eyepiece diopter adjustment ring & right eyepiece prismEyepiece tube for eyepieces with diameter 23.2 mm and right eyepiece prism for the PZO MND-6 microscope head.
This is a tube with an assembled diopter adjustment ring that allows correction of the vision defect of one eye and proper adjustment of image sharpness. The right eyepiece prism is integrated together with the tube.
Basic parameters:
- Type: tube with diopter correction ring
- Supported eyepiece diameter: 23.2 mm
- Included: right eyepiece prism
- For head model: PZO MND-6, both for models with black and with white housing.
This repair part (service element / replacement part) comes from a binocular head PZO MND-6 which was originally mounted on the microscopes:
- PZO Biolar DIC
- PZO Biolar B
However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30
Additional information: the fluorescence microscope PZO Biolar FL was originally sold with a mono head (monocular head) - however the PZO MND6 head also fits this microscope model.
Hinweis - this tube with prism DOES NOT FIT heads that were originally sold with PZO Studar microscopes, even though these heads look very similar. Of course if a head from the Biolar model was mounted on a Studar microscope (because it fits), then this tube will be compatible, because it is a repair element for the HEAD and not for a specific microscope model.
Manufacturer
PZO - (Polskie Zaklady Optyczne) ➔ All parts
It comes from
Why do you need this?
- as a service part in the form of a complete replacement module
- very often this tube is dented and an eyepiece cannot be inserted
- very often the diopter adjustment ring becomes damaged and does not work
- if this element in the head you own is of very poor quality
- if the eyepiece prism has been damaged (for example chipped, fungus has damaged the anti-reflection surface, the mirror surface has oxidized or has detached)
Compatibility
This microscope part is compatible with the following microscope models: