More about part: Zeiss Axiolab - longitudinal guides and bearing balls for 453510 microscope mechanical XY stage (ID: 99971)
Main Photo
Description
Zeiss Axiolab - longitudinal guides and bearing balls for 453510 microscope mechanical XY stageLongitudinal guides and bearing balls, that is a repair part for the Carl Zeiss 45 35 10 microscope stage used in Zeiss Axiolab microscopes and similar models.
Basic data of these guides:
- Number of guides in the set
- 2
- Material
- the guides are made of plastic
- Number of bearing balls
- 10 per guide
- Length of the guide
- 43 mm
- Removed from
- the mechanical XY stage Zeiss 45 35 10
- Which microscope this stage worked with
- the Zeiss Axiolab re 45 09 05 microscope
Important: these are not transverse guides. The guides I am offering here are responsible for moving the stage surface back and forth. These guides are not responsible for moving the specimen holder sideways.
The stage these guides come from was mounted in a Zeiss Axiolab re microscope, P/N 45 09 05 (also written as 450905). However, the same stage model is also mounted on the following variants:
- Zeiss Axiolab drb KT, which carries the same number 45 09 05 (450905)
- Zeiss Axiolab E re, 45 09 07 (450907)
- Zeiss Axiolab A, 45 09 09 (450909)
- Zeiss Axiolab Pol, 45 09 10 (450910)
This item is not a spare part for repairing a microscope. It is a component of the microscope stage - and the stage can be used with any compatible Zeiss microscope, and even with others, onto whose stage carrier such a stage can be fitted or screwed on.
Detailed photos of these guides are available in the gallery. Every photo shows a scale with a millimetre division. The last photo shows the whole Zeiss 453510 microscope stage, with an arrow pointing at the component in question and at where it sits in the stage, so that this part can be identified without any doubt.
Manufacturer
Zeiss - (Carl Zeiss West Germany) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- as a repair part, when you want to replace the whole damaged component
- if you have a microscope stage in which this component still works, but is in very poor condition
- if the bearing balls went missing during cleaning or repair
Compatibility
This microscope part is compatible with the following microscope models, among others:
- Zeiss 45 35 10 XY microscope stage
- Zeiss Axiolab