More about part: Zeiss Axiolab microscope coarse and fine focus drive shaft | macro and micro movement incl spring with pinion and bearing balls (ID: 99939)
Main Photo
Description
Zeiss Axiolab microscope coarse and fine focus drive shaft | macro and micro movement incl spring with pinion and bearing ballsFocus drive shaft for coarse and fine focusing of the microscope linking the macro and micro movement knobs for Carl Zeiss Axiolab microscopes.
This is a complete shaft which in the Zeiss Axiolab microscope sits inside the stand body and carries at both ends the knobs for the coarse movement (macro focusing) and for the fine movement (micro focusing).
The set offered here consists of:
- the coarse focus shaft with a cut pinion (commonly called a gear wheel) - hollow inside, in the form of a sleeve
- the fine focus shaft of the micro movement seated inside it
- the slotted round nut with its lock washer
- the compression spring
- the steel balls of the drive together with the conical brass sleeve
- the mounting disc
- the disc spring stack with friction discs (this element forms the brake of the focus drive)
- the retaining ring
This unit was removed from a Zeiss Axiolab re microscope, P/N 45 09 05 (also written 450905). It fits however just as well the variants:
- Zeiss Axiolab drb KT, which also carries the number 45 09 05 (450905)
- Zeiss Axiolab E re, 45 09 07 (450907)
- Zeiss Axiolab A, 45 09 09 (450909)
- Zeiss Axiolab Pol, 45 09 10 (450910)
Replacing this whole set or only single parts of it may help when the microscope shows among others the following problems:
- when the teeth of the pinion on the coarse focus shaft are damaged. Without taking the microscope apart you recognise this by the coarse focus knobs "skipping" while turned so that the movement stops for a moment
- when the thin inner shaft of the fine movement has become bent - a frequent damage; the fine focus knobs then no longer run smoothly and in one position they turn more stiffly
- when small parts fell apart and got lost while servicing the focusing mechanism. This happens often and then for example balls, brake discs, a spring or a washer are missing
Manufacturer
Zeiss - (Carl Zeiss West Germany) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- as a service part which is indispensable when repairing a faulty focusing in a Zeiss Axiolab microscope
- some of the faults this part may be needed for are listed in the description
Compatibility
This microscope part is compatible with the following microscope models, among others:


