More about part: Zeiss - housing for CPL W 10x/18 464022-9901 microscope eyepiece (ID: 99920)
Zeiss - housing for CPL W 10x/18 464022-9901 microscope eyepiece
Main Photo
Description
Zeiss housing for CPL W 10x/18 464022-9901 microscope eyepieceComplete plastic housing of the Zeiss CPL W 10x/18 microscope eyepiece
Most important: this is not a complete microscope eyepiece. This is a service part - the body only, without optics.
- What is included
- three parts - the lower sleeve that goes into the eyepiece tube of the head, the retaining ring that holds the lenses inside the housing, and the upper sleeve with the engraving
- Material
- all parts of the housing are made of plastic - this is unusual, because in eyepieces of this class the bodies are normally metal
- Marking on the body
- ZEISS West Germany CPL W 10x/18, number 464022-9901
- Mounting diameter
- 23.2mm - a standard eyepiece tube
This housing is not a replacement part for the microscope. It is a part for repairing a microscope eyepiece - and that eyepiece can be used in various microscopes, even from manufacturers other than Carl Zeiss. A few microscopes this eyepiece can be used with are listed in the "compatibility" section, but this is definitely not a complete list. It is safe to assume that the Zeiss CPL W 10x/18 eyepiece can be used with any microscope from any manufacturer whose head has a 23.2 mm eyepiece tube diameter.
The plastic this eyepiece housing is made of can be damaged in various ways. It often cracks, gets scratched, or deforms and partly melts from heat - the proximity of a bulb, a lamp or a soldering iron is enough, and very often the culprit is simply the cigarette held in the same hand that turns the focus knobs. In that case - especially when the optics inside are still intact - you can simply replace the housing with the one offered here.
Here you will find the top lens for this eyepiece: [[ LINK ]].
Manufacturer
Zeiss - (Carl Zeiss West Germany) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- if the body of the Carl Zeiss CPL W 10x/18 eyepiece is cracked, broken out or chipped, but the lenses are intact
- if the housing has deformed from heat or is scorched, and the eyepiece no longer sits straight in the tube or has started to jam in it
- if the plastic sleeve is scratched and scuffed, often with damaged markings
- if you have various lenses and want to build your own DIY eyepiece, for example a projection photo eyepiece, and only need a complete housing
Compatibility
This microscope part is compatible with the following microscope models: