Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

Ergaval
- Amplival
- Docuval
- Metaval
- Epival
- Vertival
- Nf
- NU
- Epityp
- Epignost

Also for Carl Zeiss Jena devices and accessories such as:
- Winkeltube
- Pankratik Zoom-System
- Interphako
- and many others.

Note - some models have different dimensions for these screws, for example, longer ones.

Note - older models of the Carl Zeiss Jena Lg microscope use a different screw.

Note - the small screw at the front of this part unscrews in the OPPOSITE direction than most screws, and this is the most common cause of damage.

Description of this part for the microscope.

Ergaval
- Amplival
- Docuval
- Metaval
- Epival
- Vertival
- Nf
- NU

Note: Please examine the photos carefully. If I have more than one of this part, some of the screws may show traces of improper (forceful) unscrewing. These are not major traces - mostly minor scratches. Of course, they do not affect the functionality of the element at all.

Note - some models have different screw dimensions, for example, longer ones.

Note - in microscopes with a centering stage holder (for polarizing stages), this screw may be different.

Note - the small screw at the front of this part unscrews in the OPPOSITE direction than most screws, and this is the most common cause of damage.

Description of this part for the microscope.

4 mo2 condenser holder that was used in the Carl Zeiss Jena Ergaval microscope. The same condenser (but with a different lower lens) is used in an identical holder in Fluoval microscopes. Condenser holders with such screws can also be found in the following microscopes:
- Docuval
- Amplival
- NU-2

The purpose of this spring screw is to push the clamp in which the condenser is mounted outward. Thanks to the spring integrated in the screw, it is possible to center the condenser using long centering screws (you can find such a centering screw in the database under number 99132).

In the last photo, an arrow clearly indicates which screw is meant and where it is mounted in the condenser holder.

Description of this part for the microscope.

that was used in the Carl Zeiss Jena Ergaval microscope. The same condenser (but with a different lower lens) is used in an identical holder in Fluoval microscopes. Condenser holders with such screws can also be found in the following microscopes:
- Docuval
- Amplival
- NU-2

In the last photo, an arrow clearly indicates which screw is meant and where it is mounted in the condenser holder.

Description of this part for the microscope.

Zeiss Jena
Model: Apl 1.4
Holder name according to the manufacturer's catalogue: Kondensor-Einhänger mo
Condenser name according to the manufacturer's catalogue: Aplanatischer Kondensor 1.4 mo / ms
Version: grey version from a Carl Zeiss Jena Ergaval microscope (as opposed to the black version used, for example, on Carl Zeiss Jena Nf microscopes)
Numerical aperture N.A.: 1.4
Aperture diaphragm: yes, mounted in the condenser holder
Wide-field lens: yes, swing-out type
Removable top lens: yes, unscrewable
Mounting diameter: the optical section (the condenser without the iris diaphragm) has a mounting diameter of 39.5 mm and can be unscrewed from the condenser holder

The complete assembly consists of the following components:
- upper Apl 1.4 lens
- removable condenser (mo / ms)
- iris diaphragm attached to the condenser holder
- condenser holder mo
- swing-out wide-field lens
- two centring screws

The last photograph in the gallery shows a page from the manufacturer's original catalogue. Arrows indicate both this exact condenser holder model and the matching condenser.

Mechanically, this condenser is mounted using a dovetail guide located beneath the microscope stage. On the Carl Zeiss Jena Ergaval this is a separate condenser mounting assembly, while on the Carl Zeiss Jena Amplival the dovetail is integrated into the microscope stage support assembly.

Description of this part for the microscope.

unscrewed. It is mounted onto the dovetail guide located underneath the microscope stage carrier and secured with a clamping screw.

Carl Zeiss Jena Ergaval microscopes were originally equipped with a condenser attached to the "MO" holder. This holder has a permanently mounted iris diaphragm and wide-field lens, while the condenser itself is screwed into the upper thread. In this configuration, the condenser cannot be exchanged.
The Carl Zeiss Jena Fluoval uses a similar arrangement, whereas the Carl Zeiss Jena Amplival was originally equipped with a panchromatic condenser.

If the user wishes to use other condensers (including those made by manufacturers other than Carl Zeiss Jena), the original condenser holder must be replaced with the MZ condenser holder. Once this has been done, any microscope condenser with a mounting diameter of 39.5 mm can be installed. Condensers with a 37 mm mounting diameter can also be used if they are fitted with a suitable adapter ring.

This is exactly such a holder for interchangeable condensers.

Basic specifications:
Manufacturer: Carl Zeiss Jena
Original documentation name and model: Kondensor-Einhänger MZ
Colour: grey, the version manufactured for the Mikroval microscope series
Internal diameter: for mounting condensers with a 39.5 mm mounting diameter (for example the Carl Zeiss Jena cardioid darkfield condenser)
Condenser retaining screw: yes, central condenser clamping screw
Centering screws: yes, two condenser centering screws
Microscope mounting: dovetail

Although this component is grey, it is also compatible with older black Carl Zeiss Jena microscopes from the 1950s and 1960s (it simply will not look completely original unless it is repainted).

This condenser holder is compatible with, among others:
- Carl Zeiss Jena Ng (black microscope)
- Carl Zeiss Jena Polmi-A (black microscope)
- Carl Zeiss Jena Nf (black microscope)
- Carl Zeiss Jena Nu (the NU-2 version is grey)
- Carl Zeiss Jena Ergaval (grey microscope)
- Carl Zeiss Jena Fluoval / Fluoval-2 (grey microscope)
- Carl Zeiss Jena Amplival and its variants (grey microscope)
- Carl Zeiss Jena Docuval (grey microscope)

Various names are used for this microscope component, including:
- condenser holder
- condenser carrier
- condenser mount
- condenser support

The last photograph includes an excerpt from the original manufacturer's documentation. An arrow indicates this exact model of condenser holder, making it easy to identify the component.