|
|
SERMIK_ID number under which this microscope part is placed in the database.
00760
|
PZO 20/0,40 PhA Anoptral Phase Contrast microscope objective 20x
|
|
Description of this part for the microscope.
Manufacturer: PZO Poland
Model: 20/0,40 PhA
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160 mm
Focal Length: 33
...
mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
Info: PhA = negative (anoptral) phase contrast (yellow bar).
Fits the following PZO phase contrast condensers:
- K4Ph
- K3Ph
- K3Ph1
- KS
- KFF 2
- KFL
This objective lens is in excellent condition. It's difficult to find an objective of this quality on the used parts market.
It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MB-10 microscope repair parts
- Mikroskop Objektiv
- obiektyw mikroskopowy
- lens
- glass
- soczewka
- microscope objective
- kontrast fazowy
- Phase Contrast
- Phasen Kontrast
- Phasenkontrast
- Ph
- pzo PhA
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
59 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MB-10
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99297
|
PZO 20:1 0,40 microscope objective 20x
|
|
Description of this part for the microscope.
PZO microscope objective.
Manufacturer: PZO Poland
Model: 20:1 0,40
Magnification: 20x
Correction: Achromat
Numerical Aperture: 0,40
Tube Length: 160
...
mm
Focal Length: 33 mm
Cover Glass: 0.17 mm
Immersion: no
Thread: RMS
It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=33 mm.
After installing the 12 mm adapter, this objective lens will have FL = 45 mm.
Names, descriptions, terms, and search contexts under which this part is searched.
- PZO MB-10 microscope repair parts
- PZO vintage microscope objective
- obiektyw do starszego mikroskopu PZO
- Lomo MBB-1 Mikroskopobjektiv
- Carl Zeiss Jena Lumipan Mikroskop Objektiv
- Lomo Biolam microscope objective
- PZO buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
PZO
Polskie Zaklady Optyczne
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MB-10
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(PZO)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a microscope without objectives and need to restock it using original parts
-
If you have a microscope that doesn't have an objective lens with this magnification and want to restock it
-
...
-
If you have such an objective lens, but it's of very poor quality or damaged
-
If you're cautious and want to have a spare objective lens
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99386
|
Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization
This is an objective designed for transmitted light work with a cover glass.
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a polarisation microscope and need an objective lens with this magnification
-
If you only need a slider to use with other objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99387
|
Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter | macro photography
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Makroobjektiv
- Super-Macro-Photo objective
- 9:1 Makroobjektiv
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99385
|
Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter | macro photography 3,7x
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Makroobjektiv
- Super-Macro-Photo objective
- 3
- 7:1 Makroobjektiv
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
119 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
