Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

MIN-8 polarizing microscope. A very similar component is found in the Lomo MBB-1 model, but it is threaded instead of attached with screws. However, it can be adapted, so I consider it compatible with that model.

Description of this part for the microscope.

MBB-1 / MBB-1A
- polarizing microscope LOMO MIN-8

Description of this part for the microscope.

microscopes:
- biological microscope LOMO MBB-1 / MBB-1A
- polarizing microscope LOMO MIN-8

Description of this part for the microscope.

and focusing is achieved by raising or lowering the microscope stage. This is the opposite of how it works, for example, in the Lomo Biolam model, where the arm moves up and down.

Along this rack gear offered here, the entire assembly of the microscope stage holder and the condenser is moved. This assembly is driven by a gear wheel mounted on a shaft located between the coarse focus knobs.

This is an original brass rack gear, not a plastic 3D print. The set includes two mounting screws (the upper and lower ones differ from each other).

Description of this part for the microscope.

integrated gear wheel for adjusting the condenser height. This is the element on which the rack moves.
The condenser holder is mounted directly on this element.

The rack is not included.

Description of this part for the microscope.

1 biological microscope

Note - Lomo MBI-1, MBR-3 or Lomo Biolam microscopes use a DIFFERENT rack gear for the condenser movement mechanism.

This is not a 3D print - it is an original brass microscope element manufactured by Lomo and removed from a MIN-8 microscope.

Description of this part for the microscope.

MIN-8 polarizing microscope. A very similar component is found in the Lomo MBB-1 model, but it is threaded instead of attached with screws. However, it can be adapted, so I consider it compatible with that model.

Description of this part for the microscope.

polarizing microscope LOMO MIN-8

Description of this part for the microscope.

Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization

This is an objective designed for transmitted light work with a cover glass.

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Description of this part for the microscope.

Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.

Description of this part for the microscope.

Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.

Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization

The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.

The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.

Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.

The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).

Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.

In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.

Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective

Description of this part for the microscope.

The tube allows a camera or a camera body to be attached to a trinocular head or directly to the microscope body, even when there is no trinocular head.

Basic technical parameters of this tube:
Manufacturer: LOMO (ЛОМО)
Colour: black, rings and barrel chrome-plated
Tilt angle: none, this is a straight tube
Internal optics: none - not even a deflecting prism
Mounting to the trinocular head or microscope body: ring dovetail (male part)
Dovetail diameter: 41 mm
Type of connection at the output: empty tube / barrel
Tube diameter at the output: 23.2 mm internal diameter
Length of the barrel / tube: variable
Length adjustment: yes - the barrel is extendable, with a scale from 140 to 200 mm and a knurled locking ring

This is the version with adjustable tube length. A scale from 140 to 200 mm is engraved on the extendable barrel, with a reference line and intermediate divisions, and the setting is locked with a knurled ring. This gives two things at once. First, a continuous change of the image scale - the longer the tube, the larger the image falling on the sensor or the film, so the framing can be adjusted without changing the objective. Second, and more importantly, the ability to work with objectives computed for different optical tube lengths: 160, 170, 180, 190 and 200 mm. Carl Zeiss Jena and LOMO objectives are computed for 160 mm, Leitz Wetzlar for 170 mm, some objectives of metallurgical and measuring microscopes for 190 or 200 mm - here you simply set the barrel to the right value and the objective works under its design conditions, instead of delivering an image with residual aberration.

Since the adapter has an empty barrel with an internal diameter of 23.2 mm on the output side, a projection eyepiece of that diameter can be placed in it, or a so-called "USB eyepiece", that is a digital microscope camera. Adapters between the 23.2 mm barrel and the M42 thread are also widely available, and from the M42 thread you can move on to any other mount: Nikon, Canon, Sony and others.

Such a tube can be mounted directly on the microscope body instead of the head. A dovetail seat with a diameter of 41.0 - 41.5 mm is found, among others, on the microscopes:
- LOMO
- Carl Zeiss Jena
- Meopta
- IOR
- Reichert Biopan
- Olympus CH

It is also often used in microscopes with a slightly larger seat, among others Zeiss West Germany, Leitz Wetzlar, PZO, Will Wetzlar, Hund Wetzlar.

The "compatibility" section gives an example list of microscopes this tube fits, although it is not a complete list.

The last photo shows a LOMO Erudit microscope with this photo tube and a projection eyepiece mounted. It is an example of use.