Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

Dovetail/mounting connector for the microscope body
- Dovetail connector diameter: 43 mm
- Lower bottom lens

Here is the same part, but with screws.

Sorry, I don't know the part number. It's a binocular head mounted on Carl Zeiss Standard 14 and Standard 16 microscopes.

Description of this part for the microscope.

Standard 14 microscope

I apologize, but I don't know the P/N number for the head. It's the binocular head used on Carl Zeiss Standard 14 and Standard 16 microscopes. I noticed it also fits other Zeiss heads - but it definitely doesn't fit the 473012-9902.

Description of this part for the microscope.

number for the head. It's the binocular head used on Carl Zeiss Standard 14 and Standard 16 microscopes. I noticed it also fits other Zeiss heads - but it definitely doesn't fit the 473012-9902.

Description of this part for the microscope.

P/N number for the head. It's the binocular head used on Carl Zeiss Standard 14 and Standard 16 microscopes. I noticed it also fits other Zeiss heads?but it definitely doesn't fit the 473012-9902.

Description of this part for the microscope.

Dovetail/mounting connector for the microscope body
- Dovetail connector diameter: 43 mm
- Lower bottom lens

Here is the same part, but without the screws.

Sorry, I don't know the part number. It's a binocular head mounted on Carl Zeiss Standard 14 and Standard 16 microscopes.

Description of this part for the microscope.

a Zeiss microscope stage on which no model designation was provided. Over the years during which Zeiss produced such stages, numerous variants were created (I have personally seen five, for example Zeiss P/N 47 34 28 - 9901 https://www.microscopeparts.eu/microscope/282). Despite this variety, the construction is largely consistent, and most parts are identical.
It is therefore highly likely that the part shown and offered here is compatible with many variants of such microscope stages.

Such stages are interchangeable and can be installed in many Zeiss microscopes, however they are most commonly used in the following microscopes:
- Zeiss Standard 14
- Zeiss Standard 16
- Zeiss Standard GFL

Also often in:
- Zeiss Standard WL
- Zeiss Standard Universal

Note that there are two such guides in the stage. They are made of a soft, thin piece of brass sheet and are often damaged; the bearing rollers also frequently fall out of them.

In the photo gallery there are detailed photos of this element together with the dimensions.

Description of this part for the microscope.

a Zeiss microscope stage on which no model designation was provided. Over the years during which Zeiss produced such stages, numerous variants were created (I have personally seen five, for example Zeiss P/N 47 34 28 - 9901 https://www.microscopeparts.eu/microscope/282). Despite this variety, the construction is largely consistent, and most parts are identical.
It is therefore highly likely that the part shown and offered here is compatible with many variants of such microscope stages.

Such stages are interchangeable and can be installed in many Zeiss microscopes, however they are most commonly used in the following microscopes:
- Zeiss Standard 14
- Zeiss Standard 16
- Zeiss Standard GFL

Also often in:
- Zeiss Standard WL
- Zeiss Standard Universal

In the photo gallery there are detailed photos of this element together with the dimensions. Additionally, in the last photo an arrow indicates which element is being referred to and where it is located, in order to clearly identify this part.

Description of this part for the microscope.

a Zeiss microscope stage on which no model designation was provided. Over the years during which Zeiss produced such stages, numerous variants were created (I have personally seen five, for example Zeiss P/N 47 34 28 - 9901 https://www.microscopeparts.eu/microscope/282). Despite this variety, the construction is largely consistent, and most parts are identical.
It is therefore highly likely that the part shown and offered here is compatible with many variants of such microscope stages.

Such stages are interchangeable and can be installed in many Zeiss microscopes, however they are most commonly used in the following microscopes:
- Zeiss Standard 14
- Zeiss Standard 16
- Zeiss Standard GFL

Also often in:
- Zeiss Standard WL
- Zeiss Standard Universal

In the photo gallery there are detailed photos of this element together with the dimensions. Additionally, in the last photo an arrow indicates which element is being referred to and where it is located, in order to clearly identify this part.

Description of this part for the microscope.

a Zeiss microscope stage on which no model designation was provided. Over the years during which Zeiss produced such stages, numerous variants were created (I have personally seen five, for example Zeiss P/N 47 34 28 - 9901 https://www.microscopeparts.eu/microscope/282). Despite this variety, the construction is largely consistent, and most parts are identical.
It is therefore highly likely that the part shown and offered here is compatible with many variants of such microscope stages.

Such stages are interchangeable and can be installed in many Zeiss microscopes, however they are most commonly used in the following microscopes:
- Zeiss Standard 14
- Zeiss Standard 16
- Zeiss Standard GFL

Also often in:
- Zeiss Standard WL
- Zeiss Standard Universal

In the photo gallery there are detailed photos of this element together with the dimensions. Additionally, in the last photo an arrow indicates which element is being referred to and where it is located, in order to clearly identify this part.

Description of this part for the microscope.

cover.

This microscope part was removed from a Zeiss microscope stage on which no model designation was provided. Over the years during which Zeiss produced such stages, numerous variants were created (I have personally seen five, for example Zeiss P/N 47 34 28 - 9901 https://www.microscopeparts.eu/microscope/282). Despite this variety, the construction is largely consistent, and most parts are identical.
It is therefore highly likely that the part shown and offered here is compatible with many variants of such microscope stages.

Such stages are interchangeable and can be installed in many Zeiss microscopes, however they are most commonly used in the following microscopes:
- Zeiss Standard 14
- Zeiss Standard 16
- Zeiss Standard GFL

Also often in:
- Zeiss Standard WL
- Zeiss Standard Universal

In the photo gallery there are detailed photos of this element together with the dimensions. Additionally, in the last photo an arrow indicates which element is being referred to and where it is located, in order to clearly identify this part.

Description of this part for the microscope.

This particular screw was removed from a Zeiss Standard 14 microscope, but it will most likely fit most models of the Standard series, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89
- Zeiss Standard Universal
- Zeiss Standard Photomicroscope
- Zeiss Ultraphot

Note - over the years, Zeiss microscopes (or the same microscopes sold under the Zeiss-Winkel name or under the Opton brand), especially simpler models such as the Zeiss Standard Junior, used different types of head-retaining screws. These were not necessarily spring-loaded screws - in some cases ordinary threaded clamping screws were used instead.

Before deciding to replace the screw in a microscope, it is best to carefully compare its appearance and dimensions with the photographs in the gallery or ask a question on the forum https://www.mikroskopie-forum.de/

Description of this part for the microscope.

particular screw was removed from a Zeiss Standard 14 microscope, but it will most likely fit most models of the Standard series, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89
- Zeiss Standard Universal
- Zeiss Standard Photomicroscope
- Zeiss Ultraphot

Note - over the years, Zeiss microscopes (or the same microscopes sold under the Zeiss-Winkel name or under the Opton brand), especially simpler models such as the Zeiss Standard Junior, used different types of head-centering screws. These were not necessarily this type - in some cases ordinary threaded clamping screws were used instead.

Before deciding to replace the screw in a microscope, it is best to carefully compare its appearance and dimensions with the photographs in the gallery or ask a question on the forum https://www.mikroskopie-forum.de/

In the last photos in the gallery, I use arrows to show exactly which microscope component is being offered and where it is in the microscope located .

Description of this part for the microscope.

field lens (Zeiss P/N 47 30 68). It can be installed in the tube between the objective nosepiece and the observation head. The lens is operated by a lever protruding from the side of the tube. In the manufacturer's documentation, this lever is referred to as "Switch to turn axis, e.g. with wide field changer 0.8x-1x". If this optional microscope component is not installed, the opening intended for the lever is closed with a plastic blanking plug additionally secured by a retaining screw. This listing includes exactly that end cap and screw.

This particular cover was removed from a Zeiss Standard 14 microscope, which is not normally equipped with the lever-operated lens. However, it will most likely fit the majority of other Standard series models, for example:
- Zeiss Standard GFL
- Zeiss Standard 16
- Zeiss Standard WL 89

The blanking plug itself carries the catalog number Zeiss 47 30 65 (alternative notation: Zeiss 473065) and is described as an "intermediate tube cover element".

Not only is this plastic cap frequently lost over the years, but the lever itself or the lens assembly may also become damaged and require removal. In such cases, this blanking plug should be installed to protect the microscope optics from dust.

In the last photographs in the gallery, I use arrows to show exactly which microscope component is being offered and where it is located within the microscope.

Description of this part for the microscope.

commonly fitted to the following microscopes:
- Zeiss Standard 14 / 16 / 18
- Zeiss Standard GFL

In this database, under number 99668, you will also find the specimen holder in the standard version - meaning not the long one.

This is a component of the microscope stage rather than a component dedicated to a specific microscope model. Since this stage can be used on many different microscope models, this specimen holder is likewise compatible with numerous Carl Zeiss Standard series microscopes.

The gallery photographs show the exact dimensions of this component and its mounting holes. The final photographs additionally show the complete microscope stage from which this specimen holder was removed. An arrow indicates the exact stage component being offered, making visual compatibility easy to verify. The accompanying video also demonstrates the operation of the spring-loaded specimen clamp.