Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

eyepiece
- 52 mm > 39 mm thread adapter for Olympus Camedia
- Olympus Camedia Zoom C-5000 5.0 Mpx camera

This kit allows you to take micrographs on PZO microscopes. It can be mounted either
- instead of a head on biological microscopes
- on the PZO MNT-6 trino head
- one the PZO DIC MPI2 / MPI3 / MPI5
- or on the PZO NF-SB3 L1 adapter with a T6 connector for PZO MST-130 / 131 / 132 stereo microscopes.

Description of this part for the microscope.

camera with an Exakta connector, but I'm not sure about this. Everyone installs their own adapter, whether for a C-mount, M42, or other dedicated adapter (Olympus, Nikon, Sony, etc.).

The kit allows you to take microphotographs on CZJ Citoval and Technival stereo microscopes. It mounts between the tube with the magnification changer and the head.

This is the latest version in white.

Description of this part for the microscope.

number 11505145 and 11505146
Compatibility: Leica DM4000, DM4500, DM5000 and DM6000 microscopes

Description of this part for the microscope.

this adapter allows operation of 1 objective at a time - this is not a objective turret (revolver)
- the adapter allows centering the objective relative to the optical axis, which is extremely important in polarization
- the adapter does not support objectives with RMS thread (approx. 20 mm)

Interesting fact:
This adapter fits the Carl Zeiss Jena Polmi-A microscope. This microscope is a construction designed for work with objectives with RMS thread and a tube length of 160 mm, but after using this adapter it is possible to use objectives with M19 thread corrected for infinity. Such tests were performed by Mr. Wojciech Plonka and he found that it works, but in this case the objectives produce stronger magnification than nominal (link: https://www.facebook.com/groups/254539018060854/?multi_permalinks=1857582481089825).

Description of this part for the microscope.

operation of 1 objective at a time - this is not a objective turret (revolver)
- the adapter allows work in brightfield mode
- the adapter does not support objectives with RMS thread (approx. 20 mm)

Description of this part for the microscope.

notation: 45 29 95)
Additional magnification: none, total magnification 1.0x
Mounting on microscope side: dovetail, diameter 44 mm
Mounting on the other side: C-mount thread (25 mm)

This element fits, among others, the following microscopes:
- Zeiss Axiophot
- Zeiss Axioplan
- Zeiss Axioskop 20
- Zeiss Axioskop 50
- Zeiss Axiotron
- Zeiss Axiotron 2

Also fits other microscope models (even from other manufacturers) that have a "dovetail" type output with a diameter of 44 mm in the trinocular head.

Note that this adapter has no optics inside - neither reducing nor magnifying - so the total factor is 1.0x.

This element can be the answer to the following questions:
- how to connect a camera to a Zeiss Axioplan microscope?
- how to connect a DSLR camera to a Zeiss Axio microscope?
- which photo adapter fits the 44 mm mount of a Zeiss Axiotron microscope?
- I need an adapter to C-mount 25 mm thread
- can I connect a USB camera or a digital camera to a Zeiss Axiophot microscope?

Description of this part for the microscope.

notation: 42 61 13)
Internal optics: yes, reducing to 0.63x
Mounting on microscope side: 60 mm thread
Mounting on the other side: C-mount thread (25 mm)

This element fits, among others, the following microscopes:
- Zeiss Axio Examiner
- Zeiss Axio Imager
- Zeiss Axiolab
- Zeiss Axio Observer
- Zeiss Axio Vert
- Zeiss Scope.A1
- Zeiss Stemi 508
- Zeiss SteREO Discovery
- and others with a 60 mm thread mount

Note that this adapter has internal optics (and at the same time increases the field of view) - so the total factor is 0.63x.

This element can be the answer to the following questions:
- how to connect a camera to a Zeiss Axio Scope.A1 microscope?
- how to connect a DSLR camera to a Zeiss Axio microscope?
- which photo adapter fits the 60 mm mount of a Zeiss Axio Lab.A1 microscope?
- I need an adapter to C-mount 25 mm thread
- can I connect a USB camera or a digital camera to a Zeiss Imager.A1 microscope?

Description of this part for the microscope.

In practice, it works like a "single-objective nosepiece".

A M27 - RMS adapter is screwed into this adapter, allowing an objective with RMS thread to be mounted.

Note: MMU-3 is the model name written in the Latin alphabet. The original model name is written in Cyrillic and looks similar to "MMY-3".

The last images include scans from the instruction manual clearly showing which element this is.

Description of this part for the microscope.

8x
- lens mount marked: 0.8x 419610 (font characteristic for the Wild company. Number 419610 is the manufacturer catalog number)
- field widening lens: 0.8x MPS 195182 (number 195182 is the catalog number of this lens)
- Wild Leitz / Wild MPS 52 photo tube (Heerbrugg Switzerland) with connector for the MPS 46 control console (important - the console is not included)

The mounting diameter on the microscope side is 40 mm.

This tube is currently commonly used for connecting digital cameras or photographic cameras to microscopes with a trinocular head. There is a lot of information about this online as well as DIY step-by-step guides on internet forums. It allows taking microscope photographs and, after minor modifications, it can also be used for macrophotography https://www.mikroskopia.de/serv-mps52-en.html.

Please note that the MPS 52 was sold during a period of ownership and manufacturer name changes. Leitz Wetzlar changed its name to "Leica", and Leica later acquired Wild Heerbrugg. Because of this, the following names are used interchangeably for the entire MPS 52 system:
- Wild MPS 52
- Leitz MPS 52
- Leica MPS 52
This is also visible on the element shown in the photographs:
- the adapter for Polaroid film backs is marked as Wild Heerbrugg
- while the tube itself carries the "Wild Leitz" logo

Description of this part for the microscope.

visual observation and image capture (photography or video recording) on the LOMO MBC-10 (Lytkarino) stereo microscope.

The designation MBC-10 is the Cyrillic spelling. The equivalent name written in the Latin alphabet is MBS-10.

The MBC-10 microscope was also sold under the following names:
- OGME-P3
- SF-100 (name used in the USA)
- Silver Connection MBC-10 (mainly on the German market)

These are exactly the same microscopes, therefore this trinocular attachment is also compatible with those models.

Manufacturer: LZOS Lytkarino
Manufacturer information: LOMO is commonly but incorrectly listed as the manufacturer
Model: MFU
Year of manufacture: 1995
Component type: photographic adapter / trinocular attachment
Light split: 50% of the light from one optical path is directed to the photographic output
Simultaneous observation: yes, the adapter operates in simul-focal mode and does not interrupt simultaneous viewing
Camera connection: M42 thread - with an appropriate adapter virtually any camera or imaging device can be connected

Mechanically, this photographic attachment is installed between the magnification changer and the binocular head.

Various names are commonly used for this camera adapter on the secondary market and in microscope literature, including:
- SF-FA (the name used in the USA)
- trinocular head
- trinocular attachment
- trinocular tube
- trino
- photo tube
- phototube
- photo adapter
- photographic adapter
- camera adapter
- camera attachment
- photo port
- camera port
- photo output
- camera output
- photomicrography adapter
- microscope camera adapter
- microscope photo adapter
- photo head
- camera head
- simul-focal adapter
- M42 photo adapter
- M42 camera adapter
- MBS-10 camera port
- stereo microscope photo tube

It is worth noting that this photo tube is not compatible with MBC-1, MBC-2 or MBC-9 stereo microscopes and does not fit any biological microscope - including biological microscopes manufactured by LOMO.

Description of this part for the microscope.

to be connected to a Zeiss (Opton) OPMI surgical microscope.

The F=340 photo adapter fits the following surgical microscopes:
- Zeiss OPMI 1 / Opton OPMI 1
- Zeiss OPMI 3 / Opton OPMI 3
- Zeiss OPMI 6 / Opton OPMI 6
- Zeiss OPMI Vario / Opton OPMI Vario
- Zeiss OPMI Pico / Opton OPMI Pico

Manufacturer: Zeiss
Model: F=340
Catalogue number: 000000-1022-973
Catalogue name: Photoadapter f=340 T2
Photographic thread: T2, i.e. M42x0.75 (42 mm diameter, 0.75 mm thread pitch)
Tube diameter for mounting to the microscope: 34 mm
Built-in optics: yes

This adapter is NEW (even if the fixed description elements elsewhere on the website state that it is used).

Note regarding the manufacturer's name: Carl Zeiss West Germany marketed its OPMI surgical microscopes (and their accessories) under the following names:
- Zeiss OPMI
- Opton OPMI
These are the same microscopes and the same components.
When the name "Opton" appears, it is printed on the label, while the word "Zeiss" underneath has often been washed off, worn away or scraped off at the factory. The reason for the deliberate removal of the "Zeiss" name and the use of the "Opton" name was an agreement with Carl Zeiss Jena, which operated in the former Eastern Bloc (communist bloc), to avoid using the name "Zeiss" on export products.

Description of this part for the microscope.

the microscope body (see the last photo in the gallery). It is a replaceable component - the manufacturer provides various adapters for connecting different cameras at this location.

Basic parameters of this adapter:
Manufacturer: Carl Zeiss (Oberkochen, West Germany)
Catalog number: 47 17 78 (another notation: 471778)
Mounting to the microscope body: 50 mm diameter dovetail ring
Camera mounting to the adapter: ring with a 70 mm inner diameter
Clamping screw: yes, there is a screw for securing the camera

This camera mount was removed from a Carl Zeiss ICM 405 microscope, but it fits any microscope with a compatible mounting interface. It originally had an analog Zeiss M35 camera mounted in it.

The photos show the dimensions and exact appearance of this component from multiple angles. Additionally, the last photo shows the Zeiss ICM 405 microscope with an arrow indicating where this component is located on the microscope. This allows the component to be accurately identified and located.

The Carl Zeiss ICM 405 inverted microscope is an advanced version of the Carl Zeiss IM 35 inverted microscope. The main differences between the ICM 405 and the IM 35 are the ICM 405's more advanced microphotography capabilities.

However, many users treat these two models as essentially the same microscope and use the name "Zeiss IM 35" for both, sometimes only specifying that it is a "Zeiss IM 35 with photo output".

Both models were also sold under the Opton brand, in which case they are respectively called Opton IM 35 and Opton ICM 405. Users often refer to them as a "Zeiss Opton microscope".

Description of this part for the microscope.

Mechanically, this photo tube is mounted inside the microscope body, below the microscope head mount. It splits the light beam (image) travelling through the microscope head and eyepieces to the user's eyes. Part of the light beam is directed to the universal photo output.

Basic parameters of this photo tube:
Manufacturer: Carl Zeiss (Oberkochen, West Germany)
Catalog number: 47 17 72 (other notation: 471772 or 471772-9901)
Mounting to the microscope body: the tube is mounted inside the microscope, with only the adjustable output extending to the outside (a simple tube)
Camera mounting to the adapter: a straight tube with an inner diameter of 35 mm extends from the side of the microscope body. The outer diameter of the mounting section is approx. 39 mm
Focus adjustment: yes, the tube has a helical focusing ring for precise focus adjustment
Light beam splitting mode: the light beam is split (it is not 0/100 or 100/0), unfortunately I do not know the percentage of the light split (no documentation available)
Light-splitting element: partially reflecting beam-splitting mirror (not a cemented prism block)

This photo tube was removed from a Carl Zeiss ICM 405 microscope. However, it is a completely universal light-splitting tube, so with suitable DIY mounts it can be used in practically any microscope or other optical device (astronomical telescope, binoculars, spotting scope, spectrophotometer, etc.). The universal interface for connecting an image-recording device (a straight tube with a 35 mm inner diameter) allows, among other things, the use of digital cameras or DSLR cameras (with suitable adapters). Since the light beam is split, this output can be used for "simul-focal live" observation, meaning that in real time the same image can be seen simultaneously through the microscope eyepieces and by the camera.

The photos show the dimensions and exact appearance of this component from multiple angles. Additionally, the last photo shows the Zeiss ICM 405 microscope with an arrow indicating where this component is located on the microscope. This allows the component to be accurately identified and located.

The Carl Zeiss ICM 405 inverted microscope is an advanced version of the Carl Zeiss IM 35 inverted microscope. The main differences between the ICM 405 and the IM 35 are the ICM 405's more advanced microphotography capabilities.
However, many users treat these two models as essentially the same microscope and use the name "Zeiss IM 35" for both, sometimes only specifying that it is a "Zeiss IM 35 with photo output".
Both models were also sold under the Opton brand, in which case they are respectively called Opton IM 35 and Opton ICM 405. Users often refer to them as a "Zeiss Opton microscope".

Note: In one discussion on the Mikroskopie-Forum.de forum, it is mentioned that this tube was also used in Carl Zeiss Axiomat microscopes. The user refers to this component as "Zeiss 47 17 72-9901 Kino- und TV-Anschluß", but I do not have documentation for this component and therefore cannot confirm this.

Description of this part for the microscope.

be attached to a trinocular head or directly to the microscope body, even when there is no trinocular head.

Basic technical parameters of this tube:
Manufacturer: Carl Zeiss Jena
Colour: grey
Tilt angle: none, this is a straight tube
Internal optics: none - not even a deflecting prism
Mounting to the trinocular head or microscope body: ring with a dovetail
Dovetail diameter: 41 mm
Type of connection at the output: empty tube / barrel
Tube diameter at the output: 23.2 mm internal diameter
Length of the barrel / tube: 25 mm
Length adjustment: no - this is not a tube with adjustable height

Since the adapter has an empty barrel with an internal diameter of 23.2 mm on the output side, a projection eyepiece of that diameter can be placed in it, or a so-called "USB eyepiece", that is a digital microscope camera. Adapters between the 23.2 mm barrel and the M42 thread are also widely available, and from the M42 thread you can move on to any other mount: Nikon, Canon, Sony and others.

Such a tube can be mounted directly on the microscope body instead of the head. A dovetail seat with a diameter of 41.0 - 41.5 mm is found, among others, on the microscopes:
- Carl Zeiss Jena
- LOMO
- Meopta
- IOR
- Reichert Biopan
- Olympus CH

It is also often used in microscopes with a slightly larger seat, among others Zeiss West Germany, Leitz Wetzlar, PZO, Will Wetzlar, Hund Wetzlar.

The adapter can equally well be fitted onto trinocular heads, as many of them have a seat prepared for it, among others:
- the output in the trinocular tubes of the Carl Zeiss Jena Jenamed, Jenaval, Jenalumar, Jenatech, Jenavert, Jenapol microscopes
- the LOMO TRN-1 heads (ЛОМО ТРН-1), found in the LOMO Polam microscopes
- some versions of the intermediate photo tubes for the Carl Zeiss Jena Mikroval series microscopes (others require a tube screwed onto a thread)

This is not a "tube for one specific microscope model". A trinocular head can be mounted not only on the microscope it was sold with - it is therefore correct to assume that this is a universal tube, with a 41 mm dovetail on one side and a 23.2 mm barrel on the other.

The "compatibility" section gives an example list of microscopes this tube fits, although it is not a complete list.

Description of this part for the microscope.

The tube allows a camera or a camera body to be attached to a trinocular head or directly to the microscope body, even when there is no trinocular head.

Basic technical parameters of this tube:
Manufacturer: LOMO (ЛОМО)
Colour: black, rings and barrel chrome-plated
Tilt angle: none, this is a straight tube
Internal optics: none - not even a deflecting prism
Mounting to the trinocular head or microscope body: ring dovetail (male part)
Dovetail diameter: 41 mm
Type of connection at the output: empty tube / barrel
Tube diameter at the output: 23.2 mm internal diameter
Length of the barrel / tube: variable
Length adjustment: yes - the barrel is extendable, with a scale from 140 to 200 mm and a knurled locking ring

This is the version with adjustable tube length. A scale from 140 to 200 mm is engraved on the extendable barrel, with a reference line and intermediate divisions, and the setting is locked with a knurled ring. This gives two things at once. First, a continuous change of the image scale - the longer the tube, the larger the image falling on the sensor or the film, so the framing can be adjusted without changing the objective. Second, and more importantly, the ability to work with objectives computed for different optical tube lengths: 160, 170, 180, 190 and 200 mm. Carl Zeiss Jena and LOMO objectives are computed for 160 mm, Leitz Wetzlar for 170 mm, some objectives of metallurgical and measuring microscopes for 190 or 200 mm - here you simply set the barrel to the right value and the objective works under its design conditions, instead of delivering an image with residual aberration.

Since the adapter has an empty barrel with an internal diameter of 23.2 mm on the output side, a projection eyepiece of that diameter can be placed in it, or a so-called "USB eyepiece", that is a digital microscope camera. Adapters between the 23.2 mm barrel and the M42 thread are also widely available, and from the M42 thread you can move on to any other mount: Nikon, Canon, Sony and others.

Such a tube can be mounted directly on the microscope body instead of the head. A dovetail seat with a diameter of 41.0 - 41.5 mm is found, among others, on the microscopes:
- LOMO
- Carl Zeiss Jena
- Meopta
- IOR
- Reichert Biopan
- Olympus CH

It is also often used in microscopes with a slightly larger seat, among others Zeiss West Germany, Leitz Wetzlar, PZO, Will Wetzlar, Hund Wetzlar.

The "compatibility" section gives an example list of microscopes this tube fits, although it is not a complete list.

The last photo shows a LOMO Erudit microscope with this photo tube and a projection eyepiece mounted. It is an example of use.

Description of this part for the microscope.

camera to a trinocular head or directly to the microscope stand, even when there is no trinocular head at all.

This is a black tube with an upper element (barrel) 55 mm long. Here (https://www.microscopeparts.eu/gallery/91057) you can see a functionally identical adapter, but grey and with an upper barrel only 25 mm long.

Black adapters of this kind come from the era of the Carl Zeiss Jena L stands (models Carl Zeiss Jena Lg, Lumipan, Ng, Nf or Nu). The grey ones are newer, from the era of the Mikroval series (models Carl Zeiss Jena Laboval, Eduval, Ergaval or Amplival and Docuval).

The mounting fit is of course identical, so both can be used interchangeably.

Basic technical parameters of this tube:
Manufacturer: Carl Zeiss Jena
Colour: black
Inclination angle: none, this is a straight tube
Internal optics: none - not even a deflecting prism
Mounting to a trinocular head or microscope stand: ring dovetail
Ring dovetail diameter: 41.5 mm
Type of connection at the output: empty barrel / tube
Tube diameter at the output: 23.2 mm inner diameter
Barrel / tube length: 55 mm
Tube length adjustment: no - this is not a height-adjustable tube

Because on the output side this adapter has an empty barrel with an inner diameter of 23.2 mm, you can place in it a projection eyepiece of that diameter or a so-called USB eyepiece, that is a digital microscope camera. In addition, adapters between the 23.2 mm barrel and the M42 thread are widely available, and from the M42 thread you can already move on to any other mount: Nikon, Canon, Sony and all the rest.

Such a tube can be mounted directly on the microscope stand, in place of the head. A seat for a ring dovetail of 41.0 - 41.5 mm diameter is found among others in the microscopes:
- Carl Zeiss Jena
- LOMO
- Meopta
- IOR
- Reichert Biopan
- Olympus CH
- Gamma

It is also used in microscopes with a slightly larger seat, among others Zeiss West Germany, Leitz Wetzlar, PZO, Will Wetzlar, Hund Wetzlar.

The adapter can likewise be fitted onto trinocular heads, as many of them have a seat prepared for it, among others:
- the output in the trinocular tubes of the microscopes Carl Zeiss Jena Jenamed, Jenaval, Jenalumar, Jenatech, Jenavert, Jenapol
- the LOMO TRN-1 heads (ЛОМО ТРН-1), found in LOMO Polam microscopes
- some versions of the black intermediate photo tubes for the microscopes Carl Zeiss Jena Lg / Lumipan / Nf and of the grey ones from the Mikroval series (others require a tube that screws in on a thread)

This is not a tube for one particular microscope model. A trinocular head can be mounted not only on the microscope it was sold with, so the correct assumption is that this is a universal tube with a ring dovetail of 41.5 mm diameter on one side and a barrel of 23.2 mm diameter on the other.

In the compatibility section you will find an example list of microscopes this tube fits, although that list is not complete.

Description of this part for the microscope.

microscopes have a standardized mount of 38 mm diameter into which various tubes can be fitted. One of exactly these tubes is presented here.

Basic parameters of the tube presented here:
Markings on the housing: "Germany" on one side and "30ø" on the other side
Mounting connection: a plain tube (cylinder). This is not a tube with a thread or a dovetail
Mounting diameter: 38 mm, that is the standard mounting diameter used in Leitz Wetzlar trinocular heads
Internal optics: none - this tube has no optics inside
Internal diameter: the tube has an internal diameter of 30 mm, so that a projection eyepiece of exactly that diameter can be fitted inside

The trinocular heads this tube fits are used among others in the following microscopes:
- Leitz Wetzlar Orthoplan
- Leitz Wetzlar Diaplan
- Leitz Wetzlar Ergolux
- Leitz Wetzlar Dialux
- Leitz Wetzlar Laborlux
- Leitz Wetzlar SM-LUX
- Leitz Wetzlar Ortholux II
- Leitz Wetzlar Aristoplan
- Leitz Wetzlar HM-LUX

This is not a tube for one particular microscope model. A trino head can be mounted not only on the microscope it was sold with, so the correct assumption is that this is a standard tube for Leitz Wetzlar trinocular heads - and those can be used on most microscope models of this company.

The last photo in the gallery shows what this tube looks like with a 30 mm eyepiece fitted.

The "compatibility" section lists example microscopes this tube fits, although the list is not complete.