Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

housing.

This is a spherical rear reflector mirror mounted inside the halogen illuminator behind the lamp. The function of this element is to collect and reflect the light that "shines backwards and escapes" and direct it towards the collimating lens.

Important: the Lux-US halogen illuminator was used exclusively in Reichert Zetopan microscopes.

Reichert Diapan and Reichert MeF-2 microscopes do not use the Lux-US illuminator, however the illuminators used in these microscopes have an identical mechanical housing and use the same rear reflector mirror.

Therefore, the mirror presented here is also compatible with these microscopes - it is a repair part for the illuminator rather than for a specific microscope.

Older Reichert Zetopan microscope models were equipped with a 6V 30W illuminator, while newer models used the Lux-US illuminator with a 12V 100W halogen lamp. Currently (as of 2026), most amateur microscope users believe that this illuminator should be converted to an LED light source, while professional users still prefer a halogen bulb as a light source because of its full colour spectrum.
However, in both cases this lampenhaus is essential and must be repaired if damaged. Since it protrudes beyond the outline of the microscope (it is attached to the rear of the microscope base), it is exposed to mechanical damage. The mirror located directly next to the light source is susceptible to damage, among other reasons, due to exposure to high temperatures. In addition, over the decades the mirror surface may oxidise, causing the mirror to lose its optical properties and the entire illuminator to lose brightness.

Information from the manufacturer's English-language catalogue "Zetopan Research Microscope. Price List, Effective December 1, 1976":
- This component belongs to the microscope illuminator. The catalogue number of the illuminator is: "Lux US" 9 14 41 04 and "Binolux 3 dual lamp housing" 9 60 05 21

In the photo gallery you will find the exact dimensions of this element, and the last photo shows the complete Lux-US illuminator for the Reichert Zetopan microscope, allowing compatibility to be confirmed with certainty.

Description of this part for the microscope.

inside the microscope base beneath the condenser. It is secured from above with three screws. The collector housing also incorporates a holder for 32 mm round filters.

This component performs several functions:
- it collimates the light beam
- it also serves as a holder for round filters
- it redirects the horizontal light beam coming from the lamp house vertically upwards
- the flip-out wide field lens provides even illumination of the entire specimen when using low-magnification objectives

Replacement of this collector in a Reichert Zetopan microscope may be necessary in the following situations, among others:
- if this component is missing because someone removed it, for example during an unfinished repair
- if the upper protective glass of the collector has been broken
- if the mechanism operating the flip-out wide field lens has been damaged
- if - as often happens - the mirror prism has been damaged, broken, or its reflective surface has deteriorated through oxidation

Information from the manufacturer's English-language catalogue "Zetopan Research Microscope. Price List, Effective December 1, 1976":
- This component belongs to the microscope stand. The catalogue number of the stand is: 9 90 00 01

The last photographs in the gallery show the base of a Reichert Zetopan microscope (in this case the older black version). An arrow indicates exactly which component it is and where it is located. The collector is shown both from the outside and in its installed position inside the microscope base. This makes it easy to identify the component correctly.

Description of this part for the microscope.

illuminator attached to the rear of the microscope base). This light source is shared by both transmitted light (DIA) and reflected light (EPI). Inside the microscope base there are two light-directing mirrors operated by control knobs located on the top of the base housing. These controls are marked "EPI" and "MIX". The "EPI" switch moves a mirror into the light path, directing 100% of the light into the reflected-light illumination path (vertically upward through a dedicated lens located inside the microscope base). This is exactly the assembly offered here — the EPI reflected-light angle mirror switch complete with its mirror and movement mechanism.

Information taken from the manufacturer's English-language catalogue "Zetopan Research Microscope. Price List, Effective December 1, 1976":
- This component belongs to the microscope stand. The stand has catalogue number: 9 90 00 01

This component — or individual parts of it — is frequently damaged. Replacing it with the assembly offered here can solve, among others, the following problems:
- if the "EPI" control knob operating the mirror has become bent or broken
- if the light-directing mirror has cracked, chipped, become scratched due to improper cleaning, or its reflective surface has oxidised
- if the movement mechanism, gear, spring or guide pin has been damaged

The last photographs in the gallery clearly indicate, using an arrow, exactly which component is being offered and where it is located inside the microscope. This makes identification straightforward.

The video gallery also contains two videos. One demonstrates how this reflected-light angle mirror operates and moves while installed in the Reichert Zetopan microscope base. The second shows the component after removal, including close-up views from different angles and all of its moving parts.

Description of this part for the microscope.

illuminator connected at the rear of the microscope base). This light source is shared by both the transmitted light (DIA) and the reflected light (EPI). Inside the base there are two light-reflecting mirrors, controlled by knobs located on top of the microscope base housing. These switches are labelled "EPI" and "MIX". The "MIX" switch introduces a semi-transparent plate filter into the optical path; it reflects 50% of the light onto the reflected-light path (vertically upward, through a special lens fitted in the base) and passes the remaining 50% onward for transmitted-light illumination. It is precisely this module - the MIX switch with its beam-splitting plate and the mechanism that moves this filter - that I present here.

Information from the manufacturer's English-language catalogue "Zetopan Research Microscope. Price List, Effective December 1, 1976":
- This is an element from the base of the microscope stand. This stand has the catalogue number: 9 90 00 01

This part - or its individual components - is frequently damaged. Replacing it with the part presented here allows you to solve, among others, the following problems:
- if the "MIX" knob on the base that controls the semi-transparent filter has become bent or has broken off
- if this plate-type light-beam splitter has cracked or chipped, has become scratched through improper cleaning, or its reflective surface has oxidised
- if the movement mechanism has been damaged: the gear, the spring or the pin

In the last photos of the gallery, an arrow indicates exactly which element is meant and where it is located in the microscope. This allows for unambiguous identification of this element.

Additionally, the video gallery contains two films. One shows the operation and the movement mechanics of this beam divider when it is installed in the base of the Reichert Zetopan microscope. The second film shows this part already removed, with close-ups from various angles and the moving components.