More about part: Leitz Wetzlar HM-LUX 3 / Leica 10/0.25 P/N 519754 microscope objective 10x 160/- | Hund H600 and Will Wetzlar compatible (ID: 91015)
Leitz Wetzlar HM-LUX 3 / Leica 10/0.25 P/N 519754 microscope objective 10x 160/- | Hund H600 and Will Wetzlar compatible
Main Photo
Description
Leitz Wetzlar HM-LUX 3 / Leica 10/0.25 P/N 519754 microscope objective 10x 160/- | Hund H600 and Will Wetzlar compatibleLeitz Wetzlar achromatic microscope objective, 10x magnification, 45 mm parfocal length.
- Manufacturer
- Leitz Wetzlar
- Magnification
- 10x
- Model
- 160/- 10/0.25
- Catalogue number in the manufacturer's catalogue
- 519754
- Numerical aperture N.A.
- 0.25
- Cover glass
- not required
- Thread
- RMS
- Tube length
- 160 mm
- Parfocal length
- 45 mm (so-called long barrel objective)
- Immersion
- no (dry objective)
This is the so-called "black series" of objectives, named after the black plastic housing of the objective. They were used mainly in Leitz Wetzlar HM-LUX-3 microscopes (and in the model signed Leica HM-LUX 3). This was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same kind of "black series" could also be found in Will Wetzlar V300 / V355 / V365 or Nikon Alphaphot YS2 microscopes.
From 1990 onwards, the logo (and the name) "Leica" began to appear on microscopes that had until then been signed "Leitz". This was also visible on the HM-LUX 3 microscope - and this microscope can be found both with the "Leitz" logo and with "Leica". The same 10x objective that I present here with the name "Leitz Wetzlar" and manufacturer number 519754 also exists with the "Leica" marking - and NOTE - it carries exactly the same number, that is "519754".
This objective fits practically any microscope from any manufacturer, provided it has an RMS thread and accepts objectives with a tube length of 160 mm and a parfocal length of 33 / 37 or 45 mm. A few such microscopes are listed as examples in the "compatibility" section, but this is not a complete list.
Manufacturer
Leitz - (Leitz Wetzlar) ➔ All parts
It comes from
Why do you need this?
- if you have a Leica / Leitz Wetzlar microscope without a 10x objective and want to complete it with original parts
- if you are looking for a good-quality 100x objective for a microscope from another manufacturer
- if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
- if you want to keep such objective in reserve
Compatibility
This microscope part is compatible with the following microscope models:
- Leitz HM-LUX 3
- Leica HM-LUX 3
- Will Wetzlar V200
- Will Wetzlar V100
- Will Wetzlar V300
- Will Wetzlar Wilozyt V365
- Will Wetzlar V355
- Will Wetzlar BX100
- Will Wetzlar BX200
- Will Wetzlar BX300
- Hund H600
- Hund Fungiscope
- Hund H500
- Hund C300
- Hund S200
- CBS Binocular Model 01
- CBS Binocular Model 02
- CBS Trinokular Model 01
- CBS AS 2
- CBS CBS monocular biological microscope
- Omax M837
- Delta Optical Genetic Pro
- PZO Biolar
- PZO Studar