More about part: Motic B1 / SFC-100 10x microscope objective RMS 10/0.25 160/- (ID: 91076)
Motic B1 / SFC-100 10x microscope objective RMS 10/0.25 160/-
Main Photo
Description
Motic B1 / SFC-100 10x microscope objective RMS 10/0.25 160Microscope objective with 10x magnification for MOTIC microscopes.
Basic parameters of this objective:
- Manufacturer
- MOTIC
- Engraving on the barrel
- 10/0.25 160/0.17
- Magnification
- 10x
- Numerical aperture N.A.
- 0.25
- Tube length
- 160 mm
- Parfocal length
- 45 mm
- Cover glass
- according to the engraving on the barrel 0.17 mm, but with 10x objectives a cover glass is in practice not required - the objective works both with and without one
- Immersion
- no (this is a dry objective)
- Thread
- RMS
I have personally tested this objective with the following microscopes:
- MOTIC B1
- MOTIC SFC-100
- PZO Studar
- Carl Zeiss Jena Ergaval
- Olympus CH
This MOTIC microscope objective will work well in a microscope from any manufacturer, provided it has an RMS thread, optics corrected for a 160 mm tube length and accepts objectives with a 45 mm parfocal length. As for the parfocal length: in the vast majority of cases (almost always) objectives with a 45 mm parfocal length can also be fitted to microscopes originally sold with so-called short barrel objectives, that is with a 33 mm or 37 mm parfocal length. In such a case it is more convenient not to mix the objectives and to have them all of the same length - but that is only a matter of convenience, not a requirement. In the compatibility section I do not list microscopes from other manufacturers, because that list would need several hundred entries.
This also works the other way round: in the MOTIC B1 and MOTIC SFC-100 microscopes you can use any objective with an RMS thread, corrected for a 160 mm tube length and with a 45 mm parfocal length - from any manufacturer. These can be unbranded objectives, PZO or Carl Zeiss Jena objectives - but the objective offered here will please those who own a MOTIC microscope and want to complete it with original parts.
Manufacturer
Motic - (Xiamen Motic Group Co., Ltd.) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- if you own a compatible MOTIC microscope, are missing the 10x objective for it - and want to complete it with original parts
- if you want to use this objective in any other compatible microscope
Compatibility
This microscope part is compatible with the following microscope models:
- Motic B1
- Motic SFC-100