More about part: Nikon E 40 0.65 160/0.17 microscope objective 40x DIN RMS | Zeiss compatible (ID: 99833)
Nikon E 40 0.65 160/0.17 microscope objective 40x DIN RMS | Zeiss compatible
Main Photo
Description
Nikon E 40 0.65 160/0.17 microscope objective 40x DIN RMS | Zeiss compatibleAchromatic microscope objective made by Nikon, with 40x magnification and a 45 mm parfocal length.
- Manufacturer
- Nikon (Japan)
- Magnification
- 40x
- Colour correction
- achromatic
- Model
- E 40 0.65 160/0.17
- Numerical aperture N.A.
- 0.65
- Cover glass
- yes, 0.17 mm thick
- Thread
- RMS
- Tube length
- 160 mm
- Parfocal length
- 45 mm (long barrel objective)
- Immersion
- no
- Operating mode
- objectives marked "E." are already CF objectives (CFN to be precise) and need no additional correction
This objective needs no additional correction from a tube lens or from the eyepieces. That makes it possible to fit it to microscopes of other makes, and in photomicrography it works in direct projection mode (it throws the image straight onto the camera sensor, with no relay optics needed).
This is the so-called black series of objectives, named after the black plastic barrel. They were used mainly in the Nikon Alphaphot YS2 microscope. That was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared for instance in the Leitz / Leica HM-LUX 3 microscope or in the Will Wetzlar V300 / V355 / V365 microscopes.
This objective fits practically any microscope of any make, provided it has an RMS thread and supports objectives with TL = 160 mm and parfocal lengths of 33 / 37 and 45 mm. A few such microscopes are listed in the "compatibility" section, but that list is not complete.
Manufacturer
Nikon - (Nikon Instruments (Nikon Corp.)) ➔ All parts
It comes from
This part was removed from the following microscope:
Why do you need this?
This microscope part is typically used for the following purposes:
- if you have a Nikon Alphaphot YS2 microscope without a 40x objective and want to complete it with original parts
- if you are looking for a good-quality 40x objective for a microscope from another manufacturer
- if you already have such an objective, but it is of very poor quality and you want to replace it with a working one
- if you want to keep such objective in reserve
Compatibility
This microscope part is compatible with the following microscope models:
- Nikon Alphaphot
- Nikon Labophot
- Carl Zeiss Jena Eduval
- Carl Zeiss Jena Laboval
- Carl Zeiss Jena Amplival
- Carl Zeiss Jena Ergaval
- PZO Biolar
- PZO Studar
- Delta Optical Genetic Pro
- Olympus CH-2 CHS
- Olympus CHK
- Olympus CH-2 CHT
- Zeiss Standard Junior
- Zeiss KF 2
- Will Wetzlar V200
- Will Wetzlar V100
- Will Wetzlar V300
- Hund H600
- Hund H500
- Hund S200
- Leitz HM-LUX 3
- Leitz Laborlux S
- Leitz Dialux 20
- SWIFT (Japan) Collegiate 400
- AmScope T720Q
- AmScope T490
- AmScope B120c
- Optical N-117M
- Omax M82e