More about part: PZO 5/0.15 microscope objective 5x for macro photography | for Carl Zeiss Jena and Lomo Biolam (ID: 99438)
PZO 5/0.15 microscope objective 5x for macro photography | for Carl Zeiss Jena and Lomo Biolam
Main Photo
Description
PZO 5/0.15 microscope objective 5x for macro photography | for Carl Zeiss Jena and Lomo BiolamPZO microscope objective 5/0.15 - a model used in microscopes, but also very often used for macro photography.
Basic technical parameters:
- - Manufacturer
- PZO Poland
- - Model
- 5/0.15 160/-
- - Alternative model marking
- 5/0.15 160/0
- - Magnification
- 5x
- - Numerical aperture N.A.
- 0.15
- - Correction
- achromatic
- - Focal length FL
- 33 mm
- - Tube length
- 160 mm
- - Cover glass
- not required, but may be used
- - Immersion
- no (dry objective)
- - Thread
- RMS
This model has a metal housing with no lens at its end. Additionally, this housing can be unscrewed without affecting the operation of the objective - resulting in a relatively large working distance of more than 20 mm.
Three features:
- large working distance exceeding 20 mm
- exceptionally high numerical aperture N.A. of 0.15
- achromatic correction allowing direct projection use
make this relatively uncommon model very frequently chosen for macro photography using a microscope objective connected to a camera (focus stacking).
The fact that this objective has FL = 33 mm allows it to be used with microscopes from other manufacturers, including:
- Lomo Biolam
- Lomo MBB-1A
- Carl Zeiss Jena LG / Lu / Lumipan
- Carl Zeiss Jena Nf
- Olympus CH
Note! Please note that the FL = 33 mm focal length means that this objective DOES NOT FIT the following microscopes:
- PZO Biolar
- PZO Studar
Early versions of this objective (with low serial numbers) have the engraved marking 5/0.15 160/0 suggesting that the objective is intended for use without a cover glass. This is true, but more precisely this objective can work both without a cover glass and with one. In newer versions the engraving already reads 5/0.15 160/- where this "minus" already means "indifferent".
Manufacturer
PZO - (Polskie Zaklady Optyczne) ➔ All parts
It comes from
Why do you need this?
- if you need a high resolution objective for macro photography
- if you need a 5x microscope objective with high numerical aperture
- when you need a good quality 5x objective for an inverted microscope
Compatibility
This microscope part is compatible with the following microscope models:
- PZO MS-16
- Carl Zeiss Jena Lumipan
- Carl Zeiss Jena Lg
- Carl Zeiss Jena Lr
- Carl Zeiss Jena Lu
- Carl Zeiss Jena Nf
- Carl Zeiss Jena NfPk
- Carl Zeiss Jena Ng
- PZO ML1
- PZO ML2
- PZO M-110
- PZO M-440
- PZO MB-10
- Lomo MPD-1
- Lomo MIN-8
- Lomo MBB-1
- Lomo Biolam
- Lomo MIN-6
- Lomo MBP-1
- Lomo Erudit
- Lomo Biolam 70
- Lomo MBR-3
- Lomo MBI-1
- IOR Biorom
- IOR MC-7
- IOR MC-6