Webpage www.microscopeparts.eu - sale of original, used and refurbished service, repair, and replacement parts for student, biological, laboratory, measuring, toolmakers, and stereo microscopes. Mail order.

Photos	PartIndex	Short name	Part name	Description	Number of pieces	Price	Category	Manufacturer	It comes from	Compatible with	Why do you need this?	Added ↑
124 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 4 mm microscope tool (key) - thumbnail [ 00590 ]	SERMIK_ID number under which this microscope part is placed in the database. 00590	Carl Zeiss Jena 4 mm microscope square tool / key	The name of this microscope part. Carl Zeiss Jena 4 mm microscope tool (key)	Description of this part for the microscope. A key with a 4 mm square hole. Most often used for centering in: - condensers (including phase contrast and DIC) - intermediate tubes, e.g., DIC or polarizing - ... iris diaphragms Often compatible with microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Justierschlüssel Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting, centering, and positioning many elements in a microscope or accessories	0000-00-00 00:00:00
125 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 1.5 mm microscope tool (key) - thumbnail [ 00589 ]	SERMIK_ID number under which this microscope part is placed in the database. 00589	Carl Zeiss Jena 1.5 mm microscope square tool / key	The name of this microscope part. Carl Zeiss Jena 1.5 mm microscope tool (key)	Description of this part for the microscope. A key with a 1.5 mm square hole. Most often used for centering in: - condensers (including phase contrast and DIC) - intermediate tubes, e.g., DIC or ... polarizing - iris diaphragms Often compatible with microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Justierschlüssel Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 2	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting, centering, and positioning many elements in a microscope or accessories	0000-00-00 00:00:00
131 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope tool / key - thumbnail [ 00588 ]	SERMIK_ID number under which this microscope part is placed in the database. 00588	Carl Zeiss Jena microscope tool / key / accesory	The name of this microscope part. Carl Zeiss Jena microscope tool / key	Description of this part for the microscope. Microscope wrench. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 6	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
136 - Thumbnail photo showing this microscope part. Carl Zeiss Jena PK 8x (18) microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 00587 ]	SERMIK_ID number under which this microscope part is placed in the database. 00587	Carl Zeiss Jena PK 8x (18) microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Carl Zeiss Jena PK 8x (18) microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. These eyepieces are in excellent optical condition and show no signs of wear. Manufacturer: Carl Zeiss Jena Magnification: 8x Field of view: 18 Mounting ... diameter: 23.2 mm Due to their very high quality, they are often used with microscopes from other manufacturers, especially when Carl Zeiss Jena Planachromat objectives are mounted. 8x eyepieces are best suited for microscopes equipped with a head with a magnification of 1.5x or 1.6x. In such cases, using 10x or higher eyepieces can result in excessive magnification and sometimes poor image quality. In such cases, 8x eyepieces provide the best image and optimal magnification. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts okulary plankompensacyjne plan compensation eyepieces Okulare microscope Mikroskop Planachromat objectives obiektywy plan planachromatyczne objektiv bino trino binokular głowica dwuoczna binocular head Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you have a head with its own 1.5x or 1.6x magnification and need the appropriate eyepieces, 8x are the right ones if you have 8x eyepieces, but they have a smaller field of view if you want to replace your poor-quality eyepieces if you have Planachromat objectives and want to use plan-compensated eyepieces	0000-00-00 00:00:00
137 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Auxiliary microscope "P" Carl Zeiss Jena for adjusting the phase rings, dark field diaphragm and DIC in the condenser (23.2 mm microscope eyepiece, telescope) - thumbnail [ 00565 ]	SERMIK_ID number under which this microscope part is placed in the database. 00565	Carl Zeiss Jena Phase Contrast Auxiliary microscope, telescope, P eyepiece, phasenkontrast Justierung Hilfsmikroskop	The name of this microscope part. Auxiliary microscope "P" Carl Zeiss Jena for adjusting the phase rings, dark field diaphragm and DIC in the condenser (23.2 mm microscope eyepiece, te ... lescope)	Description of this part for the microscope. This device replaces one of the eyepieces on the microscope head and is used to center the phase contrast, dark field, or DIC discs in the slides or condenser. ... Common names include: - auxiliary microscope - telescope - phase eyepiece It is also often used to test the quality of microscope objectives, look for contamination, delamination, diaphragm condition, or adjust the Koehler illumination (observing the filament in a light bulb). It can be used with any microscope manufacturer as long as it uses eyepieces with a mounting diameter of 23.2 mm. Manufacturer: Carl Zeiss Jena Model: P Mounting diameter: 23.2 mm Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts auxiliary microscope telescope phase eyepiece Hilfsmikroskop Teleskop Phasenokular mikroskop pomocniczy okular fazowy phase contrast kontrast fazowy phasenkontrast dic dik ciemne pole darkfield dunkelfeld objektiv objective obiektyw okular eyepiece Koehler light illumination beleuchtung Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Praktycznie każdy z TL = finite Praktycznie każdy z TL = 160 mm Praktycznie każdy z TL = 170 mm model and	A list of potential uses for this part and when it might be needed. for setting phase contrast, DIC, and dark field for testing lenses for dirt or damage for setting Koehler standard illumination	0000-00-00 00:00:00
148 - Thumbnail photo showing this microscope part. IOR Intermediate tube (angled tube) for the IOR Bucuresti microscope head with a 41 mm mounting connector (Carl Zeiss Jena / Lomo standard) dovetail. - thumbnail [ 00595 ]	SERMIK_ID number under which this microscope part is placed in the database. 00595	IOR Bucuresti microscope intermediate angle tube (Zwischentubus, Winkeltubus) /Carl Zeiss Jena 41 mm type/	The name of this microscope part. Intermediate tube (angled tube) for the IOR Bucuresti microscope head with a 41 mm mounting connector (Carl Zeiss Jena / Lomo standard) dovetail.	Description of this part for the microscope. It's not easy to find good technical descriptions of IOR microscopes. The following may contain errors. Type: Angle tube / Intermediate tube / Mirror ... tube Stand mount: 41 mm dovetail Head mount: 41 mm dovetail Inherent magnification: none (1.0x) Interestingly, the head has a slot for slide inserts (e.g., color, fluorescence, or polarizing filters). Because IOR produced microscopes modeled after the Carl Zeiss Jena and Lomo, many (most) IOR parts are compatible with microscopes from these manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. IOR MC-6 microscope repair parts IOR Bucuresti Lomo Carl Zeiss Jena Meopta Winkeltubus Zwischentubus Spiegeltubus Angle tube Intermediate tube Mirror tube tubus kątowy tubus pośredni tubus lustrzany głowica 41 mm IOR buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Intermediate tube	Abbreviated and full name of the manufacturer of this microscope part. IOR Intreprinderea Optică Română (IOR)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MC-6 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (IOR) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. MC-7 MC-6 Amplival Ergaval model Metam Biolam	A list of potential uses for this part and when it might be needed. if your microscope is missing this part if you have this part but the mirror or lens is damaged if you want to use this part in a microscope from another manufacturer	0000-00-00 00:00:00
149 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 1.5 mm microscope short tool (key) - thumbnail [ 00610 ]	SERMIK_ID number under which this microscope part is placed in the database. 00610	Carl Zeiss Jena 1.5 mm microscope square short tool / key	The name of this microscope part. Carl Zeiss Jena 1.5 mm microscope short tool (key)	Description of this part for the microscope. A short key with a 1.5 mm square hole. Most often used for centering in: - condensers (including phase contrast and DIC) - intermediate tubes, e.g. ... , DIC or polarizing - iris diaphragms Often compatible with microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Justierschlüssel Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 6	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting, centering, and positioning many elements in a microscope or accessories	0000-00-00 00:00:00
150 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope tool / key (long pin) - thumbnail [ 00609 ]	SERMIK_ID number under which this microscope part is placed in the database. 00609	Carl Zeiss Jena microscope tool / key / accesory (long pin)	The name of this microscope part. Carl Zeiss Jena microscope tool / key (long pin)	Description of this part for the microscope. Microscope wrench with long pin. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
155 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Original Carl Zeiss Jena nameplate made of aluminum (for sticking onto the microscope). - thumbnail [ 00604 ]	SERMIK_ID number under which this microscope part is placed in the database. 00604	Original Carl Zeiss Jena microscope aluminum nameplate label (to be glued to the microscope).	The name of this microscope part. Original Carl Zeiss Jena nameplate made of aluminum (for sticking onto the microscope).	Description of this part for the microscope. The dimensions are shown in the photo. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts etykietka logo plakietka tabliczka nalepka naklejka microscope mikroskop Carl Zeiss Jena Eduval Laboval Ergaval Amplival Docuval Jenamed Jenaval Jenalumar Namensschild Etikette Aufkleber aluminiom metal sticker nameplate plate Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 3	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Stickers (nameplates)	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Jenamed Eduval Laboval Jenaval Amplival Ergaval	A list of potential uses for this part and when it might be needed. on used microscopes this plate is very often missing	0000-00-00 00:00:00
156 - Thumbnail photo showing this microscope part. Lomo microscope tool / key 1PP-1 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) - thumbnail [ 00603 ]	SERMIK_ID number under which this microscope part is placed in the database. 00603	Lomo microscope tool / key / accesory (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) 1PP-1	The name of this microscope part. Lomo microscope tool / key 1PP-1 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena)	Description of this part for the microscope. Microscope wrench. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug (Lomo Biolam MBB-1A MIN-8 Bresser Biolam Carl Zeiss Jena Mikroskop) Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model MIN-8 MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
157 - Thumbnail photo showing this microscope part. Lomo microscope tool / key 2PP-2 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) - thumbnail [ 00602 ]	SERMIK_ID number under which this microscope part is placed in the database. 00602	Lomo microscope tool / key / accesory (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) 2PP-2	The name of this microscope part. Lomo microscope tool / key 2PP-2 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena)	Description of this part for the microscope. Microscope wrench. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug (Lomo Biolam MBB-1A MIN-8 Bresser Biolam Carl Zeiss Jena Mikroskop) Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model MIN-8 MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
158 - Thumbnail photo showing this microscope part. Lomo microscope tool / key 3PP-3 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) - thumbnail [ 00601 ]	SERMIK_ID number under which this microscope part is placed in the database. 00601	Lomo microscope tool / key / accesory (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena) 3PP-3	The name of this microscope part. Lomo microscope tool / key 3PP-3 (Lomo Biolam, MBB-1A, MIN-8, Bresser Biolam, Carl Zeiss Jena)	Description of this part for the microscope. Microscope wrench. Most often used for assembling/disassembling microscope stand components. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Biolam microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug (Lomo Biolam MBB-1A MIN-8 Bresser Biolam Carl Zeiss Jena Mikroskop) Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 5	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolam Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model MIN-8 MBB-1 Biolam Biolam D11	A list of potential uses for this part and when it might be needed. for mounting elements in a microscope or accessories	0000-00-00 00:00:00
202 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope grease Gleitfett I E10 (regrease) - thumbnail [ 00671 ]	SERMIK_ID number under which this microscope part is placed in the database. 00671	Carl Zeiss Jena microscope grease Gleitfett I E10 (regrease)	The name of this microscope part. Carl Zeiss Jena microscope grease Gleitfett I E10 (regrease)	Description of this part for the microscope. Original grease for servicing Carl Zeiss Jena microscopes in its original box. Type Gleitfett I E10. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikroskop grease fett smar regrease regreasing wymiana smaru neufetten Fett Gleitfett Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments mikroskop sliding micromanipulator Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. and model MIPU micrurgy equipments Lumipan Nf Amplival Ergaval	A list of potential uses for this part and when it might be needed. When you need to service your microscope or microscope component and need to replace the lubricants (grease).	0000-00-00 00:00:00
203 - Thumbnail photo showing this microscope part. Carl Zeiss Jena microscope grease Gleitfett II E75 (regrease) - thumbnail [ 00672 ]	SERMIK_ID number under which this microscope part is placed in the database. 00672	Carl Zeiss Jena microscope grease Gleitfett II E75 (regrease)	The name of this microscope part. Carl Zeiss Jena microscope grease Gleitfett II E75 (regrease)	Description of this part for the microscope. Original grease for servicing Carl Zeiss Jena microscopes in its original box. Type Gleitfett II E75. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena MIPU micrurgy equipments microscope repair parts Mikroskop grease fett smar regrease regreasing wymiana smaru neufetten Fett Gleitfett Mikromanipulator Carl Zeiss Jena micromanipulator microscope micrurgy equipments mikroskop sliding micromanipulator Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Extras	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. MIPU micrurgy equipments Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. part	List of microscope models this part is compatible with. and model MIPU micrurgy equipments Lumipan Nf Amplival Ergaval	A list of potential uses for this part and when it might be needed. When you need to service your microscope or microscope component and need to replace the lubricants (grease).	0000-00-00 00:00:00
227 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Apl. 1,4 microscope condenser w. dovetail. - thumbnail [ 00549 ]	SERMIK_ID number under which this microscope part is placed in the database. 00549	Carl Zeiss Jena Apl. 1,4 microscope condenser w. dovetail.	The name of this microscope part. Carl Zeiss Jena Apl. 1,4 microscope condenser w. dovetail.	Description of this part for the microscope. Numerical aperture: 1.4 Type: Microscope condenser, aplanatic Condenser mounting diameter: 37 mm Bottom: 41 mm dovetail Iris diaphragm: no The upper ... condenser lens can be unscrewed, creating a condenser with a low numerical aperture, providing an ideal image when working with low-power objectives. The dovetail on the bottom has a notch, most likely for a spring-loaded mounting screw, which should be located in the condenser holder. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts Carl Zeiss Jena 37 mm microscope condenser dondensor do mikroskopu Mikroskopkondensor Mikroskop Kondensor dovetail Schwalbenschwanz jaskółczy ogon Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Condensers	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with.	A list of potential uses for this part and when it might be needed. If you need a condenser with such an unusual mounting method	0000-00-00 00:00:00
486 - Thumbnail photo showing this microscope part. Carl Zeiss Jena PK 10x (15,5) microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 99049 ]	SERMIK_ID number under which this microscope part is placed in the database. 99049	Carl Zeiss Jena PK 10x (15,5) microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Carl Zeiss Jena PK 10x (15,5) microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Manufacturer: Carl Zeiss Jena Magnification: 10x Field of view: 15,5 Mounting diameter: 23.2 mm Due to their very high quality, they are often used with ... microscopes from other manufacturers, especially when Carl Zeiss Jena Planachromat objectives are mounted. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts okulary plankompensacyjne Carl Zeiss Jena Carl Zeiss Jena plan compensation eyepieces Zeiss Jena Okulare microscope Mikroskop Planachromat objectives obiektywy plan planachromatyczne objektiv bino trino binokular głowica dwuoczna binocular head Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you have 10x eyepieces, but they have a smaller field of view if you want to replace your poor-quality eyepieces if you have Planachromat objectives and want to use plan-compensated eyepieces	2026-02-19 00:00:00
778 - Thumbnail photo showing this microscope part. Zeiss ID 02 inverted microscope Ph1 10/0,22 160/- PN 46 04 01 - 9904 phase contrast microscope objective (460401) - thumbnail [ 99320 ]	SERMIK_ID number under which this microscope part is placed in the database. 99320	Zeiss ID 02 inverted microscope Ph1 10/0,22 160/- PN 46 04 01 - 9904 phase contrast microscope objective (460401)	The name of this microscope part. Zeiss ID 02 inverted microscope Ph1 10/0,22 160/- PN 46 04 01 - 9904 phase contrast microscope objective (460401)	Description of this part for the microscope. Microscope objective Zeiss for phase contrast. Basic parameters: Manufacturer: Zeiss Designation: 10/0,22 160/- Manufacturer number: 46 04 01 - ... 9904 Magnification: 10x Correction: achromat Numerical aperture: 0.22 Tube length: 160 mm Focal length: 45 mm Cover glass: indifferent Immersion: no Thread: RMS Ph1: phase contrast This specific unit was used in an inverted Zeiss ID 02 microscope, but I have also seen this objective model in Zeiss KF-2 ICS and Zeiss Axiostar microscopes. Objectives with such low magnification (here 10x) can be used without a cover glass, with a cover glass, or for observation through thicker glass (e.g. through a Petri dish), therefore they can be used both in upright and inverted microscopes. It can be used with any microscope from any manufacturer together with a compatible phase contrast condenser (or slider with phase rings). Of course the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss ID 02 microscope repair parts Carl Zeiss ID-02 Phasenkontrast Mikroskopobjektiv Carl Zeiss Axiovert phase contrast microscope objective Carl Zeiss Phasenkontrast-Mikroskop Zeiss inverses Mikroskop Carl Zeiss ID 03 Phasenkontrast Kondensor Zeiss Standard GFL Mikroskopobjektiv Zeiss Universal Phasenkontrast Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 99 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. ID 02 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. ID 02 Axiovert 25 IM 35 Axiostar Standard 14 Standard GFL Standard WL model Universal Photomicroscope Axiolab Standard Junior KF 2 Ultraphot Photomicroscope II Photomicroscope III RS ICM 405 KM	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-04-16 02:16:28
885 - Thumbnail photo showing this microscope part. Carl Zeiss Jena 65 mm / 4 mm microscope tool (key) - thumbnail [ 99440 ]	SERMIK_ID number under which this microscope part is placed in the database. 99440	Carl Zeiss Jena 65 mm / 4 mm microscope square tool / key	The name of this microscope part. Carl Zeiss Jena 65 mm / 4 mm microscope tool (key)	Description of this part for the microscope. A key with a 4 mm square hole / 65 mm long. Most often used for centering in: - condensers (including phase contrast and DIC) - intermediate tubes, e.g. ... , DIC or polarizing - iris diaphragms Often compatible with microscopes from other manufacturers. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts microscope tool key kluczyk narzędzie Schlüssel Wekzeug Justierschlüssel Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 10 €	Name of the category to which this microscope part is classified. Keys & tools	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. model Polmi A Amplival Ergaval Laboval Fluorescence Vertival	A list of potential uses for this part and when it might be needed. for mounting, centering, and positioning many elements in a microscope or accessories	2026-05-24 18:55:24
988 - Thumbnail photo showing this microscope part. Carl Zeiss Jena PK 20x (8) microscope eyepieces with a mounting diameter of 23.2 mm (pair) - thumbnail [ 99531 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99531	Carl Zeiss Jena PK 20x (8) microscope eyepieces 23,2 mm (pair)	The name of this microscope part. Carl Zeiss Jena PK 20x (8) microscope eyepieces with a mounting diameter of 23.2 mm (pair)	Description of this part for the microscope. Plan compensating microscope eyepieces manufactured by Carl Zeiss Jena with a high magnification of 20x. Manufacturer: Carl Zeiss Jena Model: PK 20x ... (8) Magnification: 20x Field of view: 8 Mounting diameter: 23.2 mm Designation: PK = plan compensating - recommended for use with plan achromatic objectives, but they also work perfectly with achromatic and apochromatic objectives Due to their very high quality, these eyepieces are often used together with microscopes from other manufacturers, especially when Carl Zeiss Jena Planachromat objectives are installed. Important: these eyepieces can be used both with finite tube microscopes (e.g. 160 mm) and infinity-corrected microscopes. This means that they can be used, for example, both on a Carl Zeiss Jena Amplival microscope and on a Carl Zeiss Jena NU-2 microscope. Note - in my opinion, eyepieces with such a high magnification are recommended rather for "inspection" than for continuous work. I deliberately write "I recommend" because this is my personal opinion based on practical use and not on the manufacturer's documentation. An eyepiece magnification of 20x should rather be treated as a zoom without revealing additional details (the resolution is not increased). This is important, for example, in heads with built-in magnification (e.g. Carl Zeiss Jena heads with built-in magnification of 1.5x or 1.6x) - when working with a 100x oil immersion objective, we theoretically obtain 1001.520 = 3000x, while physics does not allow the human eye to magnify visible light beyond approximately 1250x - therefore this is a so-called "empty magnification". Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena model microscope repair parts Carl Zeiss Jena 20x PK Mikroskop Okulare Mikroskop Brile für Carl Zeiss Jena Amplival und Ergaval Mikroskope Carl Zeiss Jena NU-2 Mikroskopuokulare Carl Zeiss Jena 20x PK microscope eyepieces Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Eyepieces	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. model Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lumipan Nf Eduval-4 Laboval-4 Amplival Ergaval Biolar Standard 14 CN-fl V200 Praktycznie każdy z TL = 160 mm	A list of potential uses for this part and when it might be needed. if you don't have these eyepieces in your set if you have 20x eyepieces, but they have a smaller field of view if you want to replace your poor-quality eyepieces if you have Planachromat objectives and want to use plan-compensated eyepieces	2026-06-28 15:29:36
1037 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Lg / Lumipan microscope brass guide for rotating circular stage - thumbnail [ 99590 ]	SERMIK_ID number under which this microscope part is placed in the database. 99590	Carl Zeiss Jena Lg / Lumipan microscope brass guide for rotating circular stage	The name of this microscope part. Carl Zeiss Jena Lg / Lumipan microscope brass guide for rotating circular stage	Description of this part for the microscope. Brass longitudinal guide on which the upper plate of the round rotating microscope stage used in Carl Zeiss Jena L-Stativ class microscopes moves. This is a ... service replacement part intended for repairing a microscope stage in which this particular component has been damaged. It is not a complete microscope stage. These rotating stages were used in L-Stativ class microscopes, including: - Carl Zeiss Jena Lg - Carl Zeiss Jena Lumipan - Carl Zeiss Jena Lu - Carl Zeiss Jena Lr Please remember that microscopes and microscope parts manufactured by the Soviet company LOMO were often clones of Carl Zeiss Jena products. Therefore, this component may also fit a Lomo microscope stage, but the dimensions should always be compared very carefully before purchasing. Carl Zeiss Jena manufactured these rotating stages from the 1930s until approximately the end of the 1960s. During that period many small design details were modified, so it is very important to correctly identify the stage model from which this component was removed. - every photo in the gallery includes a millimetre scale - the last photos show the microscope stage disassembled, with an arrow indicating exactly where this component is located - the final photos also show the complete Carl Zeiss Jena Lg microscope fitted with this stage All of this allows you to visually confirm that this is exactly the component you are looking for. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Carl Zeiss Jena Lumipan microscope stage service Carl Zeiss Jena Durchlicht Mikroskoptisch reparieren stolik mikroskopowy mikroskopu Carl Zeiss Jena Lumipan Carl Zeiss Jena L-Stativ Mikroskop Objekttisch Teile Carl Zeiss Jena Lg Mikroskop Drehtisch neufetten Carl Zeiss Jena microscope stage buy spare parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 7 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Vintage model	A list of potential uses for this part and when it might be needed. as a repair part by replacing the entire damaged element if you have a microscope stage where this element still works but is of very poor quality.	2026-07-16 22:09:27
1038 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Lg / Lumipan microscope toothed rack for rotating circular stage - thumbnail [ 99595 ]	SERMIK_ID number under which this microscope part is placed in the database. 99595	Carl Zeiss Jena Lg / Lumipan microscope toothed rack for rotating circular stage	The name of this microscope part. Carl Zeiss Jena Lg / Lumipan microscope toothed rack for rotating circular stage	Description of this part for the microscope. Rack gear (very often incorrectly referred to as a gear), which drives the movement of the upper plate of the round rotating microscope stage used in Carl Zeiss Jena L- ... Stativ class microscopes. This is a service replacement part intended for repairing a microscope stage in which this particular component has been damaged. It is not a complete microscope stage. These rotating stages were used in L-Stativ class microscopes, including: - Carl Zeiss Jena Lg - Carl Zeiss Jena Lumipan - Carl Zeiss Jena Lu - Carl Zeiss Jena Lr Please remember that microscopes and microscope parts manufactured by the Soviet company LOMO were often clones of Carl Zeiss Jena products. Therefore, this component may also fit a Lomo microscope stage, but the dimensions should always be compared very carefully before purchasing. Carl Zeiss Jena manufactured these rotating stages from the 1930s until approximately the end of the 1960s. During that period many small design details were modified, so it is very important to correctly identify the stage model from which this component was removed. - every photo in the gallery includes a millimetre scale - the last photos show the microscope stage disassembled, with an arrow indicating exactly where this component is located - the final photos also show the complete Carl Zeiss Jena Lg microscope fitted with this stage All of this allows you to visually confirm that this is exactly the component you are looking for. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Carl Zeiss Jena Lumipan microscope stage toothed rack service Carl Zeiss Jena Durchlicht Mikroskoptisch Zahnstnge reparieren stolik mikroskopowy mikroskopu Carl Zeiss Jena Lumipan Carl Zeiss Jena L-Stativ Mikroskop Objekttisch Teile Carl Zeiss Jena Lg Mikroskop Drehtisch Zahnstange neufetten Carl Zeiss Jena microscope stage buy spare parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 20 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Vintage model	A list of potential uses for this part and when it might be needed. as a repair part by replacing the entire damaged element if you have a microscope stage where this element still works but is of very poor quality.	2026-07-16 22:28:18
1039 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Lg / Lumipan microscope 0-10 I scale for rotating circular stage - thumbnail [ 99591 ]	SERMIK_ID number under which this microscope part is placed in the database. 99591	Carl Zeiss Jena Lg / Lumipan microscope 0-10 I scale for rotating circular stage	The name of this microscope part. Carl Zeiss Jena Lg / Lumipan microscope 0-10 I scale for rotating circular stage	Description of this part for the microscope. Small scale marked 0 ... 10 I, located on the side of the upper movable plate of the round rotating microscope stage used in Carl Zeiss Jena L-Stativ class microscopes. ... This scale is engraved into a specially shaped brass plate and then silver-plated. After several decades of use, this microscope part often becomes worn and the scale markings may become faint or completely invisible. When restoring such a microscope stage, replacing this scale may therefore be necessary. This is a service replacement part intended for repairing a microscope stage in which this particular component has been damaged. It is not a complete microscope stage. These rotating stages were used in L-Stativ class microscopes, including: - Carl Zeiss Jena Lg - Carl Zeiss Jena Lumipan - Carl Zeiss Jena Lu - Carl Zeiss Jena Lr Please remember that microscopes and microscope parts manufactured by the Soviet company LOMO were often clones of Carl Zeiss Jena products. Therefore, this component may also fit a Lomo microscope stage, but the dimensions should always be compared very carefully before purchasing. Carl Zeiss Jena manufactured these rotating stages from the 1930s until approximately the end of the 1960s. During that period many small design details were modified, so it is very important to correctly identify the stage model from which this component was removed. - every photo in the gallery includes a millimetre scale - the last photos show the microscope stage disassembled, with an arrow indicating exactly where this component is located - the final photos also show the complete Carl Zeiss Jena Lg microscope fitted with this stage All of this allows you to visually confirm that this is exactly the component you are looking for. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Carl Zeiss Jena Lumipan microscope stage service Carl Zeiss Jena Durchlicht Mikroskoptisch reparieren stolik mikroskopowy mikroskopu Carl Zeiss Jena Lumipan Carl Zeiss Jena L-Stativ Mikroskop Objekttisch Teile Carl Zeiss Jena Lg Mikroskop Drehtisch neufetten Carl Zeiss Jena microscope stage buy spare parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 7 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Vintage model	A list of potential uses for this part and when it might be needed. as a repair part by replacing the entire damaged element if you have a microscope stage where this element still works but is of very poor quality.	2026-07-16 22:37:52
1040 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Lg / Lumipan microscope gear shaft and longitudinal manipulator for rotating circular stage - thumbnail [ 99592 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99592	Carl Zeiss Jena Lg / Lumipan microscope gear shaft and longitudinal manipulator for rotating circular stage	The name of this microscope part. Carl Zeiss Jena Lg / Lumipan microscope gear shaft and longitudinal manipulator for rotating circular stage	Description of this part for the microscope. Gear shaft and longitudinal manipulator (knob / control knob) that drives the rack gear and, as a result, moves the upper plate of the round rotating microscope stage ... used in Carl Zeiss Jena L-Stativ class microscopes. Additionally, this microscope part features a locking lever. Once the lever is engaged, the control knob can no longer be turned, locking the upper plate of the microscope stage in the desired position. The operation of this mechanism can be seen in the video available in the video gallery. This is a service replacement part intended for repairing a microscope stage in which this particular component has been damaged. It is not a complete microscope stage. These rotating stages were used in L-Stativ class microscopes, including: - Carl Zeiss Jena Lg - Carl Zeiss Jena Lumipan - Carl Zeiss Jena Lu - Carl Zeiss Jena Lr Please remember that microscopes and microscope parts manufactured by the Soviet company LOMO were often clones of Carl Zeiss Jena products. Therefore, this component may also fit a Lomo microscope stage, but the dimensions should always be compared very carefully before purchasing. Carl Zeiss Jena manufactured these rotating stages from the 1930s until approximately the end of the 1960s. During that period many small design details were modified, so it is very important to correctly identify the stage model from which this component was removed. - every photo in the gallery includes a millimetre scale - the last photos show the microscope stage disassembled, with an arrow indicating exactly where this component is located - the final photos also show the complete Carl Zeiss Jena Lg microscope fitted with this stage All of this allows you to visually confirm that this is exactly the component you are looking for. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Carl Zeiss Jena Lumipan microscope stage service Carl Zeiss Jena Durchlicht Mikroskoptisch reparieren stolik mikroskopowy mikroskopu Carl Zeiss Jena Lumipan Carl Zeiss Jena L-Stativ Mikroskop Objekttisch Teile Carl Zeiss Jena Lg Mikroskop Drehtisch neufetten Carl Zeiss Jena microscope stage buy spare parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Vintage model	A list of potential uses for this part and when it might be needed. as a repair part by replacing the entire damaged element if you have a microscope stage where this element still works but is of very poor quality.	2026-07-16 22:57:26
1043 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Lg / Lumipan microscope sliding ring for rotating circular stage with mounting support for stage holder - thumbnail [ 99593 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99593	Carl Zeiss Jena Lg / Lumipan microscope sliding ring for rotating circular stage with mounting support for stage holder	The name of this microscope part. Carl Zeiss Jena Lg / Lumipan microscope sliding ring for rotating circular stage with mounting support for stage holder	Description of this part for the microscope. Sliding ring of the round, rotating microscope stage by Carl Zeiss Jena from microscopes of the L-Stativ class. This microscope element performs two functions in ... the microscope stage: 1. It fastens the stage to the stage holder — that is, indirectly to the microscope stand. This ring has a groove for the spring screw mounted centrally in that holder, as well as two cut-outs at the sides — for the centring screws. It is not, however, a dovetail — in Carl Zeiss Jena L-Stativ microscopes the stage is mounted on a wide ring. 2. Since it is a sliding ring, it is precisely this part that makes it possible to rotate the stage all the way around, even though this is not a polarizing stage. This is a service part for the repair of a stage in which exactly this element has been damaged. It is not a complete microscope stage. This ring contains a screw that makes it possible to lock the position, that is, to press the ring tight so that it does not rotate. This screw very often bends completely (for example during transport) or even breaks off. Breakage most commonly occurs when the sliding grease has dried out completely and someone tries to turn the stage by pushing on this screw. Rotating stages of this kind were used in microscopes of the L-Stativ class, among others: - Carl Zeiss Jena Lg - Carl Zeiss Jena Lumipan - Carl Zeiss Jena Lu - Carl Zeiss Jena Lr Remember that microscopes and microscope parts made by the Soviet company LOMO were often clones of Carl Zeiss Jena products. It is therefore possible that this element will also fit a Lomo microscope stage — but the dimensions of this part should definitely be compared very carefully first. Carl Zeiss Jena produced such stages from the 1930s until roughly the end of the 1960s. During that period minor construction details were changed many times, so it is very important to correctly identify the model of the stage from which this element was removed. - in the photo gallery a millimetre scale is visible next to every photograph - the last photographs show a disassembled microscope stage, with an arrow indicating where this element is located in the stage - the final photographs, in turn, show the complete Carl Zeiss Jena Lg microscope with this stage fitted All of this makes it possible to confirm visually that this is exactly the element you are looking for. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Lg microscope repair parts Carl Zeiss Jena Lumipan microscope stage service Carl Zeiss Jena Durchlicht Mikroskoptisch reparieren stolik mikroskopowy mikroskopu Carl Zeiss Jena Lumipan Carl Zeiss Jena L-Stativ Mikroskop Objekttisch Teile Carl Zeiss Jena Lg Mikroskop Drehtisch neufetten Carl Zeiss Jena microscope stage buy spare parts Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 15 €	Name of the category to which this microscope part is classified. Service and spare parts	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Lg Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lg Lr Lu Lumipan Vintage model	A list of potential uses for this part and when it might be needed. as a repair part by replacing the entire damaged element if you have a microscope stage where this element still works but is of very poor quality.	2026-07-17 01:19:03
1159 - Thumbnail photo showing this microscope part. Zeiss KM / KF2 microscope Ph2 40/0,65 160/0,17 PN 460701-9903 phase contrast microscope objective 40x - thumbnail [ 91020 ] video	SERMIK_ID number under which this microscope part is placed in the database. 91020	Zeiss KM / KF2 microscope Ph2 40/0,65 160/0,17 PN 460701-9903 phase contrast microscope objective 40x	The name of this microscope part. Zeiss KM / KF2 microscope Ph2 40/0,65 160/0,17 PN 460701-9903 phase contrast microscope objective 40x	Description of this part for the microscope. Carl Zeiss (West Germany) microscope objective for phase contrast. Basic parameters: Manufacturer: Zeiss Designation: Ph2 40/0.65 160/0.17 Manufacturer's ... number: 46 07 01 - 9903 Magnification: 40x Correction: achromatic Numerical aperture N.A.: 0.65 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0.17 mm Immersion: no Thread: RMS Ph2: phase contrast This particular specimen was used in a Zeiss KM microscope, but I have also seen this objective model in Zeiss KF-2 ICS and Zeiss Axiostar microscopes. It fits many microscope models from this manufacturer; some examples are listed in the "compatibility" section. It can be used with any microscope from any manufacturer together with a suitable phase-contrast condenser (or a phase-ring slider). Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm and FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss KM microscope repair parts Carl Zeiss KM / Standard Phasenkontrast Mikroskopobjektiv Carl Zeiss Universal phase contrast microscope objective Carl Zeiss Phasenkontrast-Mikroskop Zeiss Photomicroscope Phasenkontrast Carl Zeiss KF2 Phasenkontrast Kondensor Zeiss Standard GFL Mikroskop Objektiv Zeiss Phomi Phasenkontrast Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. KM Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. KM Axiovert 25 Axiostar Standard 14 Standard GFL Standard WL model Universal Photomicroscope Axiolab Standard Junior KF 2 Ultraphot Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-09-13 00:44:56

Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Advanced search

Main table with a list of microscope parts

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.