|
|
SERMIK_ID number under which this microscope part is placed in the database.
99072
|
Lomo MIN-8 / Polam - rotatable insert with polarization filter and iris diaphragm for the POL microscope condenser | polarizer
|
|
Description of this part for the microscope.
Rotatable insert (Pol slider) with polarizaton filter (polarizer) and iris diaphragm for the microscope condenser of Lomo MIN-8 microscopes and the Polam series.
...
This insert fits condensers used in the following Lomo microscopes:
- Polam (all models)
- MIN-8
- MIK-1
- MIK-4
and most likely also in other microscopes that use similarly designed condensers. Note - to make sure that this insert fits your condenser, be sure to check the diameter of this element.
Mount diameter: 35 mm
The transmitted light condenser in these microscopes features:
- interchangeable upper lenses to obtain the required aperture
- a diaphragm located below the upper lens
- a slot for inserting a Pol filter insert (the insert may, but does not have to, include an additional iris diaphragm)
In some cases, this insert alone can be used without the condenser - the effect is similar to a condenser with a Pol filter of low N.A.
This element is often used by owners of microscopes from other manufacturers to convert their condenser into a polarisation condenser.
Since this element can be removed relatively easily, it is very often missing in microscopes from the secondary market.
IMPORTANT - this is not a separate microscope condenser. It is a component of the condenser, even though it is sometimes used as a substitute for a condenser.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam microscope condenser
- Lomo MIN-8 Pol condenser
- Lomo Polam Mikroskopkondensor
- Lomo polarization microscope
- Lomo petrographic microscope
- Lomo MIN-8 Pol-Mikroskop
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Condensers
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
this element is missing
-
you have this element, but the POL filter is damaged or of very poor quality
-
you have this element, but the iris diaphragm is damaged
-
...
-
you want to use this part as a low N.A. condenser
-
you want to use this part for your own DIY projects
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99071
|
Lomo MIN-8 / Polam - rotatable insert with polarization filter for the POL microscope condenser | polarizer
|
|
Description of this part for the microscope.
Rotatable insert (Pol slider) with polarizaton filter (polarizer) for the microscope condenser of Lomo MIN-8 microscopes and the Polam series.
This insert fits
...
condensers used in the following Lomo microscopes:
- Polam
- MIN-8
- MIK-1
- MIK-4
and most likely also in other microscopes that use similarly designed condensers. Note - to make sure that this insert fits your condenser, be sure to check the diameter of this element.
Mount diameter: 26 mm
The transmitted light condenser in these microscopes features:
- interchangeable upper lenses to obtain the required aperture
- a diaphragm located below the upper lens
- a slot for inserting a Pol filter insert (the insert may, but does not have to, include an additional iris diaphragm)
Note - this is the version without an iris diaphragm.
In some cases, this insert alone can be used without the condenser - the effect is similar to a condenser with a Pol filter of low N.A.
This element is often used by owners of microscopes from other manufacturers to convert their condenser into a polarisation condenser.
Since this element can be removed relatively easily, it is very often missing in microscopes from the secondary market.
IMPORTANT - this is not a separate microscope condenser. It is a component of the condenser, even though it is sometimes used as a substitute for a condenser.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam microscope condenser
- Lomo MIN-8 Pol condenser
- Lomo Polam Mikroskopkondensor
- Lomo polarization microscope
- Lomo petrographic microscope
- Lomo MIN-8 Pol-Mikroskop
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
39 €
|
Name of the category to which this microscope part is classified.
Condensers
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
this element is missing
-
you have this element, but the POL filter is damaged or of very poor quality
-
you want to use this part as a low N.A. condenser
-
you want to use this part for your own DIY projects
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99386
|
Lomo 20 0,40 P polarization microscope objective with pol RMS objective adapter
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Manufacturer: Lomo
Magnification: 20x
Model: 20 0.40 P
Numerical aperture: 0.40
Tube length: 160 mm
Focal length: 33 mm
Cover glass: yes, 0.17 mm
Thread: RMS + Pol adapter
Info: P = Polarization
This is an objective designed for transmitted light work with a cover glass.
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted in the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
If you have a polarisation microscope and need an objective lens with this magnification
-
If you only need a slider to use with other objectives
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99387
|
Lomo Plan 9x 0,20 P polarization microscope objective with pol RMS objective adapter | macro photography
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 9x
Model: PLANACHR 9x0.20 P
Numerical aperture: 0.20
Optical correction: planachromatic (flat field)
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications.
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Makroobjektiv
- Super-Macro-Photo objective
- 9:1 Makroobjektiv
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
49 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
|
|
SERMIK_ID number under which this microscope part is placed in the database.
99385
|
Lomo 3,7 0,11 P polarization microscope objective with pol RMS objective adapter | macro photography 3,7x
|
|
Description of this part for the microscope.
Lomo microscope objective for polarization. The objective was manufactured at the Progress factory - therefore it has a different logo than standard Lomo objectives.
...
Note - this model of microscope objective is very often used for macro photography and focus stacking. More information on this can be found at the end of this description.
Manufacturer: Lomo
Magnification: 3,7x
Model: 3,7 0,11
Numerical aperture: 0.11
Tube length: 160 mm
Focal length: 33 mm
Cover glass: optional, can be used but is not required
Thread: RMS + Pol adapter
Info: P = Polarization
The RMS thread objective is mounted on a dedicated slide-in adapter that allows it to be used in Lomo MIN series and Lomo Polam series microscopes. Of course, the objective can be unscrewed and another objective can be mounted into the adapter.
The objective itself, once removed from the adapter, is a standard objective that can be used in virtually any microscope with an RMS thread. It is a so-called "short objective" (focal length 33 mm). When a 12 mm adapter is added, the total length becomes 45 mm, allowing it to be used with newer microscopes from any manufacturer.
Lomo polarization objectives with RMS thread can be installed in an RMS-M27 adapter and then used in microscopes such as Lomo Biolam M, Lomo Biolam I, Lomo Lumam, or Lomo ML-2. I have also frequently seen such objectives used in Zeiss Axio series microscopes with M27 thread.
The Pol adapter also allows precise centering of the objective relative to the entire optical path - this requires tools (keys / tools).
Info: I have repeatedly seen information stating that this RMS-Pol adapter is compatible with Leitz Wetzlar polarization microscopes - however, I have not personally verified this.
In summary, this objective is dedicated to Lomo MIN-1, MIN-4, MIN-5, MIN-6, MIN-8, Lomo Polam R-113, Polam L-211, Polam L-213, Polam R-311, Polam LMPR microscopes - but it is practically compatible with any microscope from any manufacturer that supports 160 mm objectives.
Additionally, this objective is very often used for macro photography even without a microscope. This objective does not require a cover glass and works in the "direct-projection" technique, meaning it can be connected directly to a camera without additional optics. This allows achieving a very high magnification scale and great depth of field across the entire image when using focus stacking. The fact that this is a polarization objective (i.e. stress-free optics without internal glass tensions) further improves image quality at high magnifications. Info: https://www.closeuphotography.com/lomo-3-7x-objective/2017/12/24/lomo-37x-011-microscope-objective
Names, descriptions, terms, and search contexts under which this part is searched.
- Lomo MIN-8 microscope repair parts
- Lomo Polam Mikroskopobjektiv
- Lomo Biolam polarization Mikroskop
- Lomo MIN-8 Pol-Mikroskop Objektiv
- Lomo petrographic microscope objective
- Mikroskopobjektiv für Makrofotografie
- Makroobjektiv
- Super-Macro-Photo objective
- 3
- 7:1 Makroobjektiv
- Lomo buy spare parts
|
The number of pieces of this microscope part that we have to offer.
1
|
Price in EURO for 1 piece of this microscope part. Price is negotiable.
119 €
|
Name of the category to which this microscope part is classified.
Objective
|
Abbreviated and full name of the manufacturer of this microscope part.
Lomo
Leningrad Optical Mechanical Association
|
Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed?
Model name of the equipment in which this microscopic part previously operated.
MIN-8
Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated.
(Lomo)
Here it is written whether this part was removed from a microscope or from a larger microscope part.
microscope
|
List of microscope models this part is compatible with.
|
A list of potential uses for this part and when it might be needed.
-
if you have a polarization microscope and are missing an objective with this magnification
-
if you only need the slide adapter to use with other objectives
-
...
-
if you are looking for an objective for macro photography and focus stacking
|
|
