Webpage www.microscopeparts.eu - sale of original, used and refurbished service, repair, and replacement parts for student, biological, laboratory, measuring, toolmakers, and stereo microscopes. Mail order.

Photos	PartIndex	Short name	Part name	Description	Number of pieces	Price	Category	Manufacturer	It comes from	Compatible with	Why do you need this?	Added ↑
399 - Thumbnail photo showing this microscope part. SWIFT (Japan) M40x 0,65 210/- RMS metallurgical microscope objective - thumbnail [ 00159 ]	SERMIK_ID number under which this microscope part is placed in the database. 00159	Swift (Japan) M40x 0,65 210/- RMS metallurgical microscope objective	The name of this microscope part. Swift (Japan) M40x 0,65 210/- RMS metallurgical microscope objective	Description of this part for the microscope. Unfortunately, I don't know the name of the microscope model this microscope objective fits. This objective has the Swift logo and a typeface used by Swift (Japan) ... before the Chinese company Motic took over the manufacturer. I assume this objective is from around the 1970s. Item: Microscope Objective Type: Metallurgical Objective Manufacturer: Swift Japan Model: M40x 0.65 210/- Magnification: 40x Correction: Achromat Numerical Aperture: 0.65 Tube Length: 210 mm Focal Length: 45 mm Cover Glass: No Immersion: No Thread: RMS 210 mm is the typical tube length for EPI metallographic objectives. This is most often calculated as a microscope with a 160 mm tube and a 50 mm EPI illuminator. The "M" designation stands for "Metallurgical" and allows for operation without a coverslip. This may be an objective lens that was part of a reflected light setup and was not mounted on a dedicated metallographic microscope, but on a standard biological microscope (e.g., Swift M1000) with an additional EPI illuminator. Names, descriptions, terms, and search contexts under which this part is searched. SWIFT (Japan) Metallurgical microscope repair parts Swift M4000 SWIFT (Japan) buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. SWIFT (Japan) Swift Optical Instruments (Japan)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Metallurgical Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (SWIFT (Japan)) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Metallurgical	A list of potential uses for this part and when it might be needed. if you need a lens for working without a cover glass if you need a lens for extreme macro photography	2026-01-26 14:09:33
400 - Thumbnail photo showing this microscope part. SWIFT (Japan) M100x 0,8 210/- RMS metallurgical microscope objective - thumbnail [ 90159 ]	SERMIK_ID number under which this microscope part is placed in the database. 90159	Swift (Japan) M100x 0,8 210/- RMS metallurgical microscope objective	The name of this microscope part. Swift (Japan) M100x 0,8 210/- RMS metallurgical microscope objective	Description of this part for the microscope. Unfortunately, I don't know the name of the microscope model this microscope objective fits. This objective has the Swift logo and a typeface used by Swift (Japan) ... before the Chinese company Motic took over the manufacturer. I assume this objective is from around the 1970s. Item: Microscope Objective Type: Metallurgical Objective Manufacturer: Swift Japan Model: M100x 0.8 210/- Magnification: 100x Correction: Achromat Numerical Aperture: 0.8 Tube Length: 210 mm Focal Length: 45 mm Cover Glass: No Immersion: No Thread: RMS 210 mm is the typical tube length for EPI metallographic objectives. This is most often calculated as a microscope with a 160 mm tube and a 50 mm EPI illuminator. The "M" designation stands for "Metallurgical" and allows for operation without a coverslip. This may be an objective lens that was part of a reflected light setup and was not mounted on a dedicated metallographic microscope, but on a standard biological microscope (e.g., Swift M1000) with an additional EPI illuminator. Names, descriptions, terms, and search contexts under which this part is searched. SWIFT (Japan) Metallurgical microscope repair parts Swift M4000 SWIFT (Japan) buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. SWIFT (Japan) Swift Optical Instruments (Japan)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Metallurgical Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (SWIFT (Japan)) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Metallurgical	A list of potential uses for this part and when it might be needed. if you need a lens for working without a cover glass if you need a 100x objective for non-oil immersion work if you need a lens for extreme macro photography	2026-01-26 14:09:33
579 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Metalliput - 18x/0,30 Metallurgical microscope objective with EPI illuminator adapter (9.7 Epi, 18 Met) - thumbnail [ 99155 ]	SERMIK_ID number under which this microscope part is placed in the database. 99155	Carl Zeiss Jena Metalliput - 18x/0,30 Metallurgical microscope objective with EPI illuminator adapter (9.7 Epi, 18 Met)	The name of this microscope part. Carl Zeiss Jena Metalliput - 18x/0,30 Metallurgical microscope objective with EPI illuminator adapter (9.7 Epi, 18 Met)	Description of this part for the microscope. VERY (!) rarely encountered on the used market special Epi / Met microscope objective made by Carl Zeiss Jena. Basic information: Product: microscope ... objective Manufacturer name: Epi-Objektiv 18x/0.30 Trockensystem Tubus unendlich, 1940 Name used before 1940: Epi-Objektiv 9.7 Epi, 18 Met Trockensystem Tubus unendlich, 1937 Thread: due to measurement inaccuracy I provide: 11 mm or 11.5 mm Additional: the objective includes an insert that fits the EPI illuminator Magnification (so called magnifier magnification): 18x Numerical aperture: 0.30 Oil immersion: NO (dry objective) Focal length: 13.8 mm Compatibility: - Carl Zeiss Jena EPI reflected light condenser W - Carl Zeiss Jena EPI reflected light condenser WK - Carl Zeiss Jena Metalliput metallurgical microscope - Carl Zeiss Jena Met Mi IX metallurgical microscope This unusual objective has a narrow special thread, but with the use of an intermediate ring with correction lens it can also be used on a standard microscope stand (e.g. Carl Zeiss Jena Lg). When this objective is used on the Carl Zeiss Jena Metalliput microscope with an infinity corrected tube (in practice the tube length there is 250 mm), the full magnification of 18x is obtained. When this objective is used together with a reflected light condenser (with an additional intermediate lens in the tube, that is with a 160 mm tube length) the concave mirrors partially extend under the objective, therefore the free working distance cannot be fully utilized. In such a configuration the real magnification is about two times smaller, approximately 9.7x. Epi / Met objectives produced in the years 1937-1939 have two numbers engraved on the housing: 9.7 Epi, 18 Met. a) the smaller value applies when used with the EPI condenser (correction lens focal length = 160 mm) b) the larger value applies to the magnification obtained when the objective is used with the metallurgical microscope (correction lens focal length = 250 mm). In 1940 the method of marking magnification on the objective housing was changed and only the "magnifier magnification" and the numerical aperture value were provided. Information: the source of this information is the website of the Zeiss company archive. This information is provided in order to spread knowledge about rarely encountered microscope elements. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Metalliput microscope repair parts Carl Zeiss Jena Epi Auflichtkondensor W Objektivschlitten Carl Zeiss Jena Epi Auflichtkondensor WK Carl Zeiss Jena Metallmikroskop Met Mi IX Carl Zeiss Jena Metallmikroskop Metalliput Objektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Metalliput Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Metalliput Carl Zeiss Jena Epi Auflichtkondensor W Carl Zeiss Jena Epi Auflichtkondensor WK Carl Zeiss Jena Metallmikroskop Met Mi IX	A list of potential uses for this part and when it might be needed. If you have a suitable microscope or EPI illuminator and this is exactly the objective you are missing If you have such an objective but it is damaged or of very poor quality If you have such an objective but the adapter for the EPI illuminator is missing If you would like to have such a rare objective in your collection	2026-03-08 00:00:00
580 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Metalliput - 30x/0,40 Metallurgical microscope objective with EPI illuminator adapter (16 Epi, 30 Met) - thumbnail [ 99156 ]	SERMIK_ID number under which this microscope part is placed in the database. 99156	Carl Zeiss Jena Metalliput - 30x/0,40 Metallurgical microscope objective with EPI illuminator adapter (16 Epi, 30 Met)	The name of this microscope part. Carl Zeiss Jena Metalliput - 30x/0,40 Metallurgical microscope objective with EPI illuminator adapter (16 Epi, 30 Met)	Description of this part for the microscope. VERY (!) rarely encountered on the used market special Epi / Met microscope objective made by Carl Zeiss Jena. Basic information: Product: microscope ... objective Manufacturer name: Epi-Objektiv 30x/0.40 Trockensystem Tubus unendlich, 1940 Name used before 1940: Epi-Objektiv 16/0.40 Trockensystem Tubus unendlich, 1937 Thread: due to measurement inaccuracy I provide: 11 mm or 11.5 mm Additional: the objective includes an insert that fits the EPI illuminator Magnification (so called magnifier magnification): 30x Numerical aperture: 0.40 Oil immersion: NO (dry objective) Focal length: 8,1 mm Compatibility: - Carl Zeiss Jena EPI reflected light condenser W - Carl Zeiss Jena EPI reflected light condenser WK - Carl Zeiss Jena Metalliput metallurgical microscope - Carl Zeiss Jena Met Mi IX metallurgical microscope This unusual objective has a narrow special thread, but with the use of an intermediate ring with correction lens it can also be used on a standard microscope stand (e.g. Carl Zeiss Jena Lg). When this objective is used on the Carl Zeiss Jena Metalliput microscope with an infinity corrected tube (in practice the tube length there is 250 mm), the full magnification of 30x is obtained. When this objective is used together with a reflected light condenser (with an additional intermediate lens in the tube, that is with a 160 mm tube length) the concave mirrors partially extend under the objective, therefore the free working distance cannot be fully utilized. In such a configuration the real magnification is about two times smaller, approximately 16x. Epi / Met objectives produced in the years 1937-1939 have two numbers engraved on the housing: 16 Epi, 30 Met. a) the smaller value applies when used with the EPI condenser (correction lens focal length = 160 mm) b) the larger value applies to the magnification obtained when the objective is used with the metallurgical microscope (correction lens focal length = 250 mm). In 1940 the method of marking magnification on the objective housing was changed and only the "magnifier magnification" and the numerical aperture value were provided. Information: the source of this information is the website of the Zeiss company archive. This information is provided in order to spread knowledge about rarely encountered microscope elements. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Metalliput microscope repair parts Carl Zeiss Jena Epi Auflichtkondensor W Objektivschlitten Carl Zeiss Jena Epi Auflichtkondensor WK Carl Zeiss Jena Metallmikroskop Met Mi IX Carl Zeiss Jena Metallmikroskop Metalliput Objektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Metalliput Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Metalliput Carl Zeiss Jena Epi Auflichtkondensor W Carl Zeiss Jena Epi Auflichtkondensor WK Carl Zeiss Jena Metallmikroskop Met Mi IX	A list of potential uses for this part and when it might be needed. If you have a suitable microscope or EPI illuminator and this is exactly the objective you are missing If you have such an objective but it is damaged or of very poor quality If you have such an objective but the adapter for the EPI illuminator is missing If you would like to have such a rare objective in your collection	2026-03-08 00:00:00
581 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Metalliput - 62 0,60 Met / 34 0,60 Epi Metallurgical microscope objective with EPI illuminator adapter (60x/0,60) - thumbnail [ 99157 ]	SERMIK_ID number under which this microscope part is placed in the database. 99157	Carl Zeiss Jena Metalliput - 62 0,60 Met / 34 0,60 Epi Metallurgical microscope objective with EPI illuminator adapter (60x/0,60)	The name of this microscope part. Carl Zeiss Jena Metalliput - 62 0,60 Met / 34 0,60 Epi Metallurgical microscope objective with EPI illuminator adapter (60x/0,60)	Description of this part for the microscope. VERY (!) rarely encountered on the used market special Epi / Met microscope objective made by Carl Zeiss Jena. Basic information: Product: microscope ... objective Manufacturer name: Epi-Objektiv 34/0.60 Trockensystem Tubus unendlich, 1939 Name used after 1940: Epi-Objektiv 60x/0.60 Trockensystem Tubus unendlich, 1940 Model: 62 0,60 Met / 34 0,60 Epi Thread: due to measurement inaccuracy I provide: 11 mm or 11.5 mm Additional: the objective includes an insert that fits the EPI illuminator Magnification (so called magnifier magnification): 62x Numerical aperture: 0.60 Oil immersion: NO (dry objective) Focal length: 4,1 mm Compatibility: - Carl Zeiss Jena EPI reflected light condenser W - Carl Zeiss Jena EPI reflected light condenser WK - Carl Zeiss Jena Metalliput metallurgical microscope - Carl Zeiss Jena Met Mi IX metallurgical microscope This unusual objective has a narrow special thread, but with the use of an intermediate ring with correction lens it can also be used on a standard microscope stand (e.g. Carl Zeiss Jena Lg). When this objective is used on the Carl Zeiss Jena Metalliput microscope with an infinity corrected tube (in practice the tube length there is 250 mm), the full magnification of 62x is obtained. When this objective is used together with a reflected light condenser (with an additional intermediate lens in the tube, that is with a 160 mm tube length) the concave mirrors partially extend under the objective, therefore the free working distance cannot be fully utilized. In such a configuration the real magnification is about two times smaller, approximately 34x. Epi / Met objectives produced in the years 1937-1939 have two numbers engraved on the housing: 62 0,60 Met / 34 0,60 Epi. a) the smaller value applies when used with the EPI condenser (correction lens focal length = 160 mm) b) the larger value applies to the magnification obtained when the objective is used with the metallurgical microscope (correction lens focal length = 250 mm). In 1940 the method of marking magnification on the objective housing was changed and only the "magnifier magnification" and the numerical aperture value were provided. Information: the source of this information is the website of the Zeiss company archive. This information is provided in order to spread knowledge about rarely encountered microscope elements. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Metalliput microscope repair parts Carl Zeiss Jena Epi Auflichtkondensor W Objektivschlitten Carl Zeiss Jena Epi Auflichtkondensor WK Carl Zeiss Jena Metallmikroskop Met Mi IX Carl Zeiss Jena Metallmikroskop Metalliput Objektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Metalliput Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Metalliput Carl Zeiss Jena Epi Auflichtkondensor W Carl Zeiss Jena Epi Auflichtkondensor WK Carl Zeiss Jena Metallmikroskop Met Mi IX	A list of potential uses for this part and when it might be needed. If you have a suitable microscope or EPI illuminator and this is exactly the objective you are missing If you have such an objective but it is damaged or of very poor quality If you have such an objective but the adapter for the EPI illuminator is missing If you would like to have such a rare objective in your collection	2026-03-08 00:00:00
578 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Metalliput - 5 Met / 2,7 Epi Metallurgical microscope objective with EPI illuminator adapter (5x/0,09) - thumbnail [ 99154 ]	SERMIK_ID number under which this microscope part is placed in the database. 99154	Carl Zeiss Jena Metalliput - 5 Met / 2,7 Epi Metallurgical microscope objective with EPI illuminator adapter (5x/0,09)	The name of this microscope part. Carl Zeiss Jena Metalliput - 5 Met / 2,7 Epi Metallurgical microscope objective with EPI illuminator adapter (5x/0,09)	Description of this part for the microscope. VERY (!) rarely encountered on the used market special Epi / Met microscope objective made by Carl Zeiss Jena. Basic information: Product: microscope ... objective Manufacturer name: Epi-Objektiv 2.7/0.09 Trockensystem Tubus unendlich, 1937 Name used after 1940: Epi-Objektiv 5x/0.09 Trockensystem Tubus unendlich, 1940 Model: 5 Met / 2,7 Epi Thread: due to measurement inaccuracy I provide: 11 mm or 11.5 mm Additional: the objective includes an insert that fits the EPI illuminator Magnification (so called magnifier magnification): 5x Numerical aperture: 0.09 Oil immersion: NO (dry objective) Focal length: 50 mm Compatibility: - Carl Zeiss Jena EPI reflected light condenser W - Carl Zeiss Jena EPI reflected light condenser WK - Carl Zeiss Jena Metalliput metallurgical microscope - Carl Zeiss Jena Met Mi IX metallurgical microscope This unusual objective has a narrow special thread, but with the use of an intermediate ring with correction lens it can also be used on a standard microscope stand (e.g. Carl Zeiss Jena Lg). When this objective is used on the Carl Zeiss Jena Metalliput microscope with an infinity corrected tube (in practice the tube length there is 250 mm), the full magnification of 5x is obtained. When this objective is used together with a reflected light condenser (with an additional intermediate lens in the tube, that is with a 160 mm tube length) the concave mirrors partially extend under the objective, therefore the free working distance cannot be fully utilized. In such a configuration the real magnification is about two times smaller, approximately 2.7x. Epi / Met objectives produced in the years 1937-1939 have two numbers engraved on the housing: 5 Met / 2,7 Epi. a) the smaller value applies when used with the EPI condenser (correction lens focal length = 160 mm) b) the larger value applies to the magnification obtained when the objective is used with the metallurgical microscope (correction lens focal length = 250 mm). In 1940 the method of marking magnification on the objective housing was changed and only the "magnifier magnification" and the numerical aperture value were provided. Information: the source of this information is the website of the Zeiss company archive. This information is provided in order to spread knowledge about rarely encountered microscope elements. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Metalliput microscope repair parts Carl Zeiss Jena Epi Auflichtkondensor W Objektivschlitten Carl Zeiss Jena Epi Auflichtkondensor WK Carl Zeiss Jena Metallmikroskop Met Mi IX Carl Zeiss Jena Metallmikroskop Metalliput Objektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Metalliput Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Metalliput Carl Zeiss Jena Epi Auflichtkondensor W Carl Zeiss Jena Epi Auflichtkondensor WK Carl Zeiss Jena Metallmikroskop Met Mi IX	A list of potential uses for this part and when it might be needed. If you have a suitable microscope or EPI illuminator and this is exactly the objective you are missing If you have such an objective but it is damaged or of very poor quality If you have such an objective but the adapter for the EPI illuminator is missing If you would like to have such a rare objective in your collection	2026-03-08 01:10:39
731 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 20/0,40 170/- RMS microscope objective 20x 37mm - thumbnail [ 99286 ]	SERMIK_ID number under which this microscope part is placed in the database. 99286	Kosmos Stuttgart 20/0,40 170/- RMS microscope objective 20x 37mm	The name of this microscope part. Kosmos Stuttgart 20/0,40 170/- RMS microscope objective 20x 37mm	Description of this part for the microscope. Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar. Specification: Manufacturer: Kosmos Stuttgart (Will Wetzlar) Model: 170/- 20/0. ... 40 Magnification: 20x Correction: Achromat Numerical Aperture: 0.40 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: No Immersion: No Thread: RMS Interestingly, despite its 20x magnification, this microscope objective is marked as requiring no coverslip. Objective lens of excellent optical quality. Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China. High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Binocular microscope repair parts Kosmos Stuttgart Objektiv für ein Mikroskop obiektyw mikroskopowy Kosmos Stuttgart microscope objective Mikroskopobjektiv für ROW Rathenow Mikroskop Leitz Wetzlar Mikroskopobjektiv Meopta microscope objective Humboldt Mikroskop Mikroskopobjektiv für Hertel & Reuss und Will Wetzlar Mikroskope Objektiv für Steindorff Berlin Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 49 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Binocular Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Binocular Humboldt Modell C Studio C CN-fl Metall Studio II CN-hf V200 V100 SM SM-LUX Ortholux II Orthoplan SM-D Model S Model M.Y. Model C.Y.N. Binocular biological CBS monocular biological microscope More [...] Kolleg SH45 UFD 121 UFD 122	A list of potential uses for this part and when it might be needed. If you have a Kosmos microscope without objectives and need to upgrade it using original parts If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have such an objective lens on hand If you're looking for a very good 20x objective lens for your microscope from another manufacturer	2026-04-04 14:03:15
732 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 10/0,30 170/- RMS microscope objective 10x 37mm - thumbnail [ 99287 ]	SERMIK_ID number under which this microscope part is placed in the database. 99287	Kosmos Stuttgart 10/0,30 170/- RMS microscope objective 10x 37mm	The name of this microscope part. Kosmos Stuttgart 10/0,30 170/- RMS microscope objective 10x 37mm	Description of this part for the microscope. Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar. Specification: Manufacturer: Kosmos Stuttgart (Will Wetzlar) Model: 170/- 10/0. ... 30 Magnification: 10x Correction: Achromat Numerical Aperture: 0.30 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: No Immersion: No Thread: RMS Objective lens of excellent optical quality. Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China. High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Binocular microscope repair parts Kosmos Stuttgart Objektiv für ein Mikroskop obiektyw mikroskopowy Kosmos Stuttgart microscope objective Mikroskopobjektiv für ROW Rathenow Mikroskop Leitz Wetzlar Mikroskopobjektiv Meopta microscope objective Humboldt Mikroskop Mikroskopobjektiv für Hertel & Reuss und Will Wetzlar Mikroskope Objektiv für Steindorff Berlin Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Binocular Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Binocular Humboldt Modell C Studio C CN-fl Metall Studio II CN-hf V200 V100 SM SM-LUX Ortholux II Orthoplan SM-D Model S Model M.Y. Model C.Y.N. Binocular biological CBS monocular biological microscope More [...] Kolleg SH45 UFD 121 UFD 122	A list of potential uses for this part and when it might be needed. If you have a Kosmos microscope without objectives and need to upgrade it using original parts If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have such an objective lens on hand If you're looking for a very good 10x objective lens for your microscope from another manufacturer	2026-04-04 14:18:26
733 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 30/0,55 170/- RMS microscope objective 30x 37mm - thumbnail [ 99288 ]	SERMIK_ID number under which this microscope part is placed in the database. 99288	Kosmos Stuttgart 30/0,55 170/- RMS microscope objective 30x 37mm	The name of this microscope part. Kosmos Stuttgart 30/0,55 170/- RMS microscope objective 30x 37mm	Description of this part for the microscope. Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar. Specification: Manufacturer: Kosmos Stuttgart (Will Wetzlar) Model: 170/- 30/0. ... 55 Magnification: 30x Correction: Achromat Numerical Aperture: 0.55 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: No Immersion: No Thread: RMS Interestingly, despite its 30x magnification, this microscope objective is marked as requiring no coverslip. Objective lens of excellent optical quality. Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China. High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Binocular microscope repair parts Kosmos Stuttgart Objektiv für ein Mikroskop obiektyw mikroskopowy Kosmos Stuttgart microscope objective Mikroskopobjektiv für ROW Rathenow Mikroskop Leitz Wetzlar Mikroskopobjektiv Meopta microscope objective Humboldt Mikroskop Mikroskopobjektiv für Hertel & Reuss und Will Wetzlar Mikroskope Objektiv für Steindorff Berlin Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Binocular Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Binocular Humboldt Modell C Studio C CN-fl Metall Studio II CN-hf V200 V100 SM SM-LUX Ortholux II Orthoplan SM-D Model S Model M.Y. Model C.Y.N. Binocular biological CBS monocular biological microscope More [...] Kolleg SH45 UFD 121 UFD 122	A list of potential uses for this part and when it might be needed. If you have a Kosmos microscope without objectives and need to upgrade it using original parts If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have such an objective lens on hand If you're looking for a very good 30x objective lens for your microscope from another manufacturer	2026-04-04 14:21:58
734 - Thumbnail photo showing this microscope part. Kosmos Stuttgart 63/0,85 170/0,17 RMS microscope objective 63x 37mm - thumbnail [ 99289 ]	SERMIK_ID number under which this microscope part is placed in the database. 99289	Kosmos Stuttgart 63/0,85 170/0,17 RMS microscope objective 63x 37mm	The name of this microscope part. Kosmos Stuttgart 63/0,85 170/0,17 RMS microscope objective 63x 37mm	Description of this part for the microscope. Microscope objective manufactured for Kosmos Stuttgart by Will Wetzlar. Specification: Manufacturer: Kosmos Stuttgart (Will Wetzlar) Model: 170/0.17 63/0. ... 85 Magnification: 63x Correction: Achromat Numerical Aperture: 0.85 Tube Length: 170 mm Focal Length: 37 mm Cover Glass: Yes, 0.17 mm Immersion: No (dry) Thread: RMS Objective lens of excellent optical quality. Currently, Kosmos Stuttgart sells plastic educational microscopes for children imported from China. High-quality optical microscopes were once sold under this brand (or Humboldt), primarily those manufactured at the Hertel & Reuss factory in Kassel. Names, descriptions, terms, and search contexts under which this part is searched. Kosmos Binocular microscope repair parts Kosmos Stuttgart Objektiv für ein Mikroskop obiektyw mikroskopowy Kosmos Stuttgart microscope objective Mikroskopobjektiv für ROW Rathenow Mikroskop Leitz Wetzlar Mikroskopobjektiv Meopta microscope objective Humboldt Mikroskop Mikroskopobjektiv für Hertel & Reuss und Will Wetzlar Mikroskope Objektiv für Steindorff Berlin Kosmos buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Kosmos Kosmos Stuttgart	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Binocular Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Kosmos) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Binocular Humboldt Modell C Studio C CN-fl Metall Studio II CN-hf V200 V100 SM SM-LUX Ortholux II Orthoplan SM-D Model S Model M.Y. Model C.Y.N. Binocular biological CBS monocular biological microscope More [...] Kolleg SH45 UFD 121 UFD 122	A list of potential uses for this part and when it might be needed. If you have a Kosmos microscope without objectives and need to upgrade it using original parts If you have a Kosmos microscope that doesn't have an objective lens with this magnification and want to upgrade it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have such an objective lens on hand If you're looking for a very good dry 63x objective lens for your microscope from another manufacturer	2026-04-04 14:27:01
752 - Thumbnail photo showing this microscope part. Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x - thumbnail [ 00779 ]	SERMIK_ID number under which this microscope part is placed in the database. 00779	Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x	The name of this microscope part. Zeiss Plan 2,5/0,08 160/- microscope objective RMS 2,5x	Description of this part for the microscope. Carl Zeiss (Germany) microscope objective. Technical parameters: Manufacturer: Carl Zeiss (Germany) Magnification: 2,5x Model: Plan 2,5/0, ... 08 160/- Color correction: Planachromat Numerical aperture: 0.08 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking. Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics. A microscope objective with such low magnification is used, among others, in the following fields: - tissue overview examination in pathomorphology - observation of insects - observation of minerals - observation of inclusions in amber - handwriting analysis - observation of micromollusks - and many others Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard WL microscope repair parts Carl Zeiss Mikroskopobjektiv Carl Zeiss Standard GFL microscope objective Carl Zeiss Universal Mikroskop Objektiv mit kleine Vergrößerung Carl Zeiss Phomi Weitfeld Mikroskopobjektiv Grossfeld Mikroskopobjektiv für Pathologie Zeiss Übersichtsobiektiv Zeiss Mikroskopobjektiv für Blutuntersuchung obiektyw mikroskopowy do obserwacji owadów Mikroskop-Planobjektiv für Insektenntersuchung Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 25 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard WL Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard WL Nf Ng Amplival Ergaval Docuval Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-12 15:50:57
763 - Thumbnail photo showing this microscope part. Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x - thumbnail [ 99323 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99323	Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x	The name of this microscope part. Zeiss Universal / Phomi Ph2 40 0,65 phase contrast microscope objective 40x	Description of this part for the microscope. Manufacturer: Carl Zeiss West Germany Model: Ph2 40 0,65 Magnification: 40x Correction: Achromat Numerical Aperture: 0,65 Tube Length: 160 mm Focal ... Length: 45 mm Cover Glass: yes, 0,17 mm Immersion: no Thread: RMS Info: Ph = phase contrast It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Universal microscope repair parts Carl Zeiss Standard GF Ph2 Phasenkontrast Mikroskopobjektiv Carl Zeiss 40x phase contrast microscope objective Carl Zeiss Phasenkontrast-Mikroskop Zeiss Universal Mikroskop Carl Zeiss Photomikroskop Phasenkontrast Kondensor Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Universal Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Universal Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-04-14 00:08:25
764 - Thumbnail photo showing this microscope part. Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x - thumbnail [ 99324 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99324	Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x	The name of this microscope part. Zeiss Universal / Phomi Ph3 100 1,25 Oel phase contrast microscope objective 100x	Description of this part for the microscope. Manufacturer: Carl Zeiss West Germany Model: Ph3 100 1,25 Oel Magnification: 100x Correction: Achromat Numerical Aperture: 1,25 Tube Length: 160 ... mm Focal Length: 45 mm Cover Glass: yes, 0,17 mm Immersion: yes, oil Thread: RMS Info: Ph3 = phase contrast It can be used with any microscope from any manufacturer, along with a compatible phase contrast condenser. The microscope must be compatible, meaning it supports RMS objectives, TL = 160 mm, FL = 45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Universal microscope repair parts Carl Zeiss Standard GF Ph3 Phasenkontrast Mikroskopobjektiv Carl Zeiss 100x oil phase contrast microscope objective Carl Zeiss Phasenkontrast-Mikroskop Zeiss Universal Mikroskop Carl Zeiss Photomikroskop Phasenkontrast Kondensor Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 59 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Universal Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Universal Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-04-14 00:55:15
782 - Thumbnail photo showing this microscope part. PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x - thumbnail [ 99335 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99335	PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x	The name of this microscope part. PZO Biolar DIC 10/0,24 PI 160/- Polarization Interference microscope objective 10x	Description of this part for the microscope. Polarization-interference microscope objective by PZO Basic parameters: Manufacturer: PZO Poland Model: 10/0,24 PI 160/- Magnification: ... 10x Correction: Achromat Numerical aperture: 0.24 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS Info: PI = polarization-interference objective (red ring). Compatible with the following PZO condensers: - PZO KPI 2 - slit condenser PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC). VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference. In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL. Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true. DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this. It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. PZO Biolar DIC microscope repair parts PZO Biolar DIC PI polarisation-interferenz Mikroskopobjektiv PZO UPI Pluta polarisation interference microscope objective obiektyw PZO polaryzacyjno-interferencyjny PZO buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 69 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. PZO Polskie Zaklady Optyczne	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Biolar DIC Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (PZO) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Biolar DIC Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. if you have an incomplete PZO UPI DIC set missing this exact objective and want to complete it if you need a polarization-interference objective for your own purposes if you have such an objective but it is of very poor quality or damaged if you want to keep such an objective as a spare	2026-04-16 23:37:42
800 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x - thumbnail [ 99365 ]	SERMIK_ID number under which this microscope part is placed in the database. 99365	Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x	The name of this microscope part. Carl Zeiss Jena Planachromat 3,2/0,10 160/- microscope objective 3,2x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 3,2x Model: Planachromat 3,2/0, ... 10 160/- Color correction: Planachromat Numerical aperture: 0.10 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS This lens provides an excellent, wide image, and because it doesn't require a cover glass, it's often used for macro photography and stacking. Important - this lens is not suitable for taking photos using the "direct-projection" technique, as it requires plan-compensation optics. A microscope objective with such low magnification is used, among others, in the following fields: - tissue overview examination in pathomorphology - observation of insects - observation of minerals - observation of inclusions in amber - handwriting analysis - observation of micromollusks - and many others It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleine Vergrößerung Carl Zeiss Jena Weitfeld Mikroskopobjektiv Grossfeld Mikroskopobjektiv für Pathologie Zeiss Übersichtsobiektiv Zeiss Mikroskopobjektiv für Blutuntersuchung obiektyw mikroskopowy do obserwacji owadów Mikroskop-Planobjektiv für Insektenntersuchung obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 35 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 17:22:15
801 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x - thumbnail [ 99366 ]	SERMIK_ID number under which this microscope part is placed in the database. 99366	Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x	The name of this microscope part. Carl Zeiss Jena Planachromat 10/0,25 160/- microscope objective 10x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 10x Model: Planachromat 10/0,25 160/- ... Color correction: Planachromat Numerical aperture: 0.25 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 17:42:26
802 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x - thumbnail [ 99367 ]	SERMIK_ID number under which this microscope part is placed in the database. 99367	Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x	The name of this microscope part. Carl Zeiss Jena Planachromat 16/0,32 160/0,17 microscope objective 16x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 16x Model: Planachromat 16/0,32 160/0, ... 17 Color correction: Planachromat Numerical aperture: 0.32 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0,17 mm Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 18:01:40
803 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x - thumbnail [ 99368 ]	SERMIK_ID number under which this microscope part is placed in the database. 99368	Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x	The name of this microscope part. Carl Zeiss Jena Planachromat 40/0,65 160/0,17 microscope objective 40x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 40x Model: Planachromat 40/0,65 160/0, ... 17 Color correction: Planachromat Numerical aperture: 0.65 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0,17 mm Immersion: no Thread: RMS It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 18:04:56
804 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x - thumbnail [ 99369 ]	SERMIK_ID number under which this microscope part is placed in the database. 99369	Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x	The name of this microscope part. Carl Zeiss Jena Planachromat HI 100/1,25 160/0,17 oil immersion microscope objective 100x	Description of this part for the microscope. Carl Zeiss Jena microscope objective. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 100x Model: Planachromat HI 100/1,25 160/0, ... 17 Color correction: Planachromat Numerical aperture: 1,25 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0,17 mm Immersion: yes, oil Thread: RMS Info: HI = Homogene Immersion, also oil immersion It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, i.e. support RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Planachromat Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv obiektyw Planachromat do mikroskopu PZO Biolar Lomo Biolam plan Mikroskopobjektiv Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 39 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 18:15:29
810 - Thumbnail photo showing this microscope part. Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography - thumbnail [ 99370 ]	SERMIK_ID number under which this microscope part is placed in the database. 99370	Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography	The name of this microscope part. Carl Zeiss Jena Semiplan 6,3/0,16 160/- microscope objective 6,3x for macro-photography	Description of this part for the microscope. Microscope objective Carl Zeiss Jena Semiplan 6.3x mainly used for macro photography. Technical parameters: Manufacturer: Carl Zeiss Jena Magnification: 6. ... 3x Model: Semiplan 6.3/0.16 160/- Color correction: Semi-Planachromat Numerical aperture: 0.16 Tube length: 160 mm Focal length: 45 mm Cover glass: no Immersion: no Thread: RMS This is one of the most commonly used microscope objectives for macro photography and focus stacking. Important - this objective IS SUITABLE for taking images using the "direct-projection" technique, as it does not require plan-compensating optics. It can be used with any microscope from any manufacturer. Of course, the microscope must be compatible, meaning it supports RMS objectives, TL=160 mm, FL=45 mm. Names, descriptions, terms, and search contexts under which this part is searched. Carl Zeiss Jena Amplival microscope repair parts Carl Zeiss Jena Semiplan Mikroskopobjektiv Carl Zeiss Jena Amplival microscope objective Carl Zeiss Jena Ergaval Mikroskop Objektiv mit kleine Vergrößerung obiektyw mikroskopowy do fotografowania owadów Mikroskop-Semiplan Objektiv für Insekten-makrofotografie Carl Zeiss Jena buy spare parts	The number of pieces of this microscope part that we have to offer. 0	Price in EURO for 1 piece of this microscope part. Price is negotiable. 169 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Carl Zeiss Jena VEB Carl Zeiss Jena DDR (former East Germany)	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Amplival Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Carl Zeiss Jena) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Amplival Ergaval Docuval Nf Ng Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 Standard WL BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you need a microscope objective for macro photography If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-04-23 23:11:02
953 - Thumbnail photo showing this microscope part. Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906 - thumbnail [ 99500 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99500	Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906	The name of this microscope part. Zeiss Plan 16/0,35 160/0,17 RMS 16x microscope objective PN 460510-9906	Description of this part for the microscope. Microscope objective manufactured by Zeiss West Germany. Technical parameters: Manufacturer: Zeiss West Germany Magnification: 16x Model: Plan 16/0. ... 35 160/0.17 Manufacturer part number: 46 05 10-9906 (alternative notation: 460510 - 9906) Color correction: Planachromat Numerical aperture N.A.: 0.35 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0.17 mm thickness Immersion: no (dry objective) Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard WL microscope repair parts Zeiss Plan Mikroskopobjektiv Zeiss Standard GFL / WL microscope objective Zeiss Phomi / Universal Mikroskop Objektiv Zeiss West Germany planachromat microscope objective Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 95 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard WL Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard WL Nf Ng Amplival Ergaval Docuval Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand	2026-06-17 12:23:56
954 - Thumbnail photo showing this microscope part. Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904 - thumbnail [ 99501 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99501	Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904	The name of this microscope part. Zeiss Plan 40/0,65 160/0,17 RMS 40x microscope objective PN 460710-9904	Description of this part for the microscope. Microscope objective manufactured by Zeiss West Germany. Technical parameters: Manufacturer: Zeiss West Germany Magnification: 40x Model: Plan 40/0. ... 65 160/0.17 Manufacturer part number: 46 07 10-9904 (alternative notation: 460710 - 9904) Color correction: Planachromat Numerical aperture N.A.: 0.65 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0.17 mm thickness Immersion: no (dry objective) Thread: RMS Names, descriptions, terms, and search contexts under which this part is searched. Zeiss Standard WL microscope repair parts Zeiss Plan Mikroskopobjektiv Zeiss Standard GFL / WL microscope objective Zeiss Phomi / Universal Mikroskop Objektiv Zeiss West Germany planachromat microscope objective Zeiss buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 125 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Zeiss Carl Zeiss West Germany	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Standard WL Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Zeiss) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Standard WL Nf Ng Amplival Ergaval Docuval Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU More [...] Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Universal Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette CH Photomicroscope II Photomicroscope III RS KM	A list of potential uses for this part and when it might be needed. If you have a microscope from any brand that lacks an objective lens with this magnification If you have such a lens, but it is of very poor quality or damaged If you are cautious and want to have such a lens on hand if you currently have an achromatic microscope objective and want to change it to a plan achromatic one to have a flat image in the full field of view	2026-06-17 12:30:55
987 - Thumbnail photo showing this microscope part. Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x - thumbnail [ 99536 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99536	Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x	The name of this microscope part. Leitz Wetzlar EF 100/1.25 OEL 160/0.17 PHACO 3 microscope phase contrast objective 100x	Description of this part for the microscope. Microscope objective manufactured by Leitz Wetzlar with 100x magnification, designed for brightfield and phase contrast work. Manufacturer: Leitz ... Wetzlar Model: 160/0,17 EF 100/1.25 OEL PHACO 3 Magnification: 100x Correction: semi-plan achromat Numerical aperture: 1.25 Tube length: 160 mm Focal length: 45 mm Cover glass: yes, 0.17 mm Immersion: yes, oil Thread: RMS Specimen protection: yes - spring-loaded Info: PHACO 3 = phase contrast Some important information about this objective: - the designation "EF" means "Extended Field" - this is a semi-plan achromatic objective with an 18 mm field of view, which should be taken into account when selecting suitable eyepieces - the semi-plan achromatic correction is "almost flat" - it is no longer an achromat, but not yet a plan achromat - this objective can be used in brightfield, but phase contrast operation requires a compatible phase contrast condenser or a slide (slider) with a phase ring diaphragm - the designation PHACO 3 means that for phase contrast operation a phase contrast condenser set to ring "3" should be used (the equivalent setting used by Zeiss is called "Ph3") - this objective can be used with microscopes designed for objectives with a 170 mm tube length, but in such a case the optical path must be extended by 10 mm - most commonly by pulling the eyepieces out of the tubes by 10 mm This objective can be used with any microscope from any manufacturer together with a compatible phase contrast condenser. Naturally, the microscope must be compatible, i.e. it must support RMS objectives, TL=160 mm and FL=45 mm - or have adapters that make such adaptation possible (for example thread adapters). Names, descriptions, terms, and search contexts under which this part is searched. Leitz Diaplan microscope repair parts Leitz Wetzlar Diaplan Phasenkontrast Mikroskopobjektiv Leitz Wetzlar 100x oil phase contrast microscope objective Leitz Wetzlar Phasenkontrast-Mikroskop Leitz (Leica) Mikroskop Leitz Wetzlar 160 mm Phasenkontrast Kondensor Leitz buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 119 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Leitz Leitz Wetzlar	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Diaplan Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Leitz) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II Orthoplan Diaplan Universal Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol More [...] Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Biolam D11 Polam L-213 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope without objectives and need to restock it using original parts If you have a microscope that doesn't have an objective lens with this magnification and want to restock it If you have such an objective lens, but it's of very poor quality or damaged If you're cautious and want to have a spare objective lens	2026-06-28 14:59:54
1026 - Thumbnail photo showing this microscope part. Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm - thumbnail [ 99563 ] video	SERMIK_ID number under which this microscope part is placed in the database. 99563	Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm	The name of this microscope part. Lomo Polam L-213 / R-113 PLAN 25x0,50 P polarizing microscope objective with Pol iris diaphragm	Description of this part for the microscope. PLAN achromatic polarizing microscope objective Lomo PLAN 25x0.50 P with iris diaphragm for Lomo Polam series polarizing microscopes. Basic par ... ameters: Manufacturer: Lomo Model: PLAN 25x0.50 P Original designation: ЛОМО ПЛАН 25х0,50 П Magnification: 25x Numerical aperture N.A.: 0.50 Tube length: 160 mm Cover glass: yes, 0.17 mm thickness Immersion oil: no – this is a dry objective Focal length: 45 mm Thread type: RMS Additional designation: P (Cyrillic: П) indicates that this objective is designed for use with polarized light Special features: built-in iris diaphragm Year of manufacture: 1976 This objective has a standard RMS thread and TL=160 mm, which means it can be used with the vast majority of microscopes from virtually any manufacturer, including Olympus, Zeiss, Nikon, PZO, Carl Zeiss Jena, Reichert, Wild and many others. The built-in iris diaphragm allows, among other things, precise centering of the objective, because in a polarizing microscope the following diaphragms may operate simultaneously: - field diaphragm in the illuminator - aperture diaphragm (or two aperture diaphragms) in the condenser - iris diaphragm in the microscope objective - iris diaphragm in the eyepiece head and accurate centering of all of them relative to each other is very important in polarized-light observations. Objectives marked "P" / "Pol" feature a special construction in which the lenses are mounted and cemented in a way that prevents mechanical stress. They can be used both for conventional brightfield microscopy and for observations in polarized light. Names, descriptions, terms, and search contexts under which this part is searched. Lomo Polam L-213 microscope repair parts Lomo Polam POL-Mikroskop Objektiv Lomo Polam Mikroskopobjektiv mit Irisblende Lomo Polam Mikroskop 25x RMS Objektiv Lomo Polam microscope objective Lomo Polam polarizing microscope objective Lomo objective with iris diaphragm Lomo buy spare parts	The number of pieces of this microscope part that we have to offer. 1	Price in EURO for 1 piece of this microscope part. Price is negotiable. 79 €	Name of the category to which this microscope part is classified. Objective	Abbreviated and full name of the manufacturer of this microscope part. Lomo Leningrad Optical Mechanical Association	Where has this microscope part been operating so far? From what microscope or larger microscope assembly was it removed? Model name of the equipment in which this microscopic part previously operated. Polam L-213 Abbreviated name of the manufacturer of the equipment in which this microscopic part previously operated. (Lomo) Here it is written whether this part was removed from a microscope or from a larger microscope part. microscope	List of microscope models this part is compatible with. Lomo Polam Polam R-113 Polam L-211 Polam LMPR Polam R-311 Polam L-213 Lomo Polam S-111 Lomo Polam S-112 Lomo Polam R-111 Lomo Polam R-112 HM-LUX 3 Laborlux S Laborlux 11 Pol S SM-LUX Ortholux II More [...] Orthoplan Diaplan Universal Standard WL Nf Ng NU NU-2 Eduval Eduval-4 Laboval Laboval-2 Laboval-3 Laboval-4 Laboval Pol Laboval Fluorescence Fluoval-2 BH-2 BHS CK2 BHA CH-2 CHT BH-2 BHTU Biolar DIC Biolar Studar MB-30 MS4 ML4 ML5 ML6 MS6 Biolar FL MB 30S Patholette MICMED-2 MIN-8 MBB-1 Biolam Biolam D11 MBP-1 Erudit Biolam 70 Standard 14 Standard GFL Standard WL Standard 16 Photomicroscope KF 2 Ultraphot DRU-3 RU2 Biorom ML-4M MC-7 Studio C CN-fl Primus Superpan Labopan Metall Studio II V200 V100 V300 Neozet Zetopan Biopan Neopan Kolleg SH45 M2240 Collegiate 400 M4000-D Microsystem 70 M72 M70 Patholux Patholette Photomicroscope II Photomicroscope III RS	A list of potential uses for this part and when it might be needed. If you have a microscope from any manufacturer and this is the objective you are missing	2026-07-12 23:17:10

Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Advanced search

Main table with a list of microscope parts

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.

Names, descriptions, terms, and search contexts under which this part is searched.