Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

camera. It allows microphotography and video recording.

This head may be installed on Omax M82e / M83e microscopes in the following situations:
- if you have an Omax M82e microscope with a binocular head and would like to connect a camera. Installing this trinocular head solves that problem.
- if you already own a microscope with a trinocular head, namely the Omax M83e model, but the head or the optics inside it have become damaged.
- if the built-in digital camera in an Omax MD82ES10 microscope has become damaged.

The Omax M83e microscope differs from the M82e and MD82ES10 models primarily in that:
- the M82e model is equipped with a binocular head
- the M83e model is equipped with a trinocular head with a photo port
- the MD82ES10 model is equipped with a binocular head incorporating a digital camera

By installing this head on an Omax M82e microscope, the functionality of the M82e can be upgraded to that of the M83e.

Basic technical parameters:
- Supported eyepiece diameter: 23.2 mm
- Mounting method to microscope stand: 39 mm dovetail mount
- Photo port type: standard 23.2 mm tube
- Intended use: biological microscopes with 160 mm tube length

This head is sometimes adapted for microscopes made by other manufacturers. If a larger dovetail mounting diameter is required, the mounting surface is commonly enlarged accordingly.

Description of this part for the microscope.

connection: 23.2 mm eyepiece tube
Model: US500350A
Maximum resolution: VGA 640x480 px
Image sensor: 0.3 MP

Manufacturer's product page: https://amscope.com/products/md35

Description of this part for the microscope.

0
Microscope connection: 23.2 mm eyepiece tube
Model: TP505100A
Maximum resolution: 2592x1944 px
Image sensor: 5 MP

Manufacturer's product page: https://omaxmicroscope.com/products/a3550s-mk2

Description of this part for the microscope.

meters:
Manufacturer: United Scope, owner of the OMAX microscope brand
Condenser type: oil dark field condenser
Numerical aperture N.A.: 1.25 - 1.36
Mounting diameter: 37 mm
Centering screws: yes, two

The standard 37 mm mounting diameter allows this condenser to be used with microscopes from many other manufacturers, for example Lomo Biolam and Olympus CH-2. After increasing the diameter to 39 mm (for example by using a collar printed on a 3D printer), this condenser also fits Zeiss West, PZO, Wild Wetzlar, Hund Wetzlar, Carl Zeiss Jena and many other microscopes.

Description of this part for the microscope.

Basic parameters:
Manufacturer: United Scope, owner of the AmScope microscope brand
Condenser type: oil dark field condenser
Numerical aperture N.A.: 1.25 - 1.36
Mounting diameter: 37 mm
Centering screws: yes, two

The standard 37 mm mounting diameter allows this condenser to be used with microscopes from many other manufacturers, for example Lomo Biolam and Olympus CH-2. After increasing the diameter to 39 mm (for example by using a collar printed on a 3D printer), this condenser also fits Zeiss West, PZO, Wild Wetzlar, Hund Wetzlar, Carl Zeiss Jena and many other microscopes.

Description of this part for the microscope.

100x
Colour correction: achromatic
Model: E. 100 1.25 oil 160/0.17
Numerical aperture N.A.: 1.25
Cover glass: yes, 0.17 mm thick
Thread: RMS
Tube length: 160 mm
Parfocal length: 45 mm (long barrel objective)
Immersion: yes, oil
Operating mode: objectives marked "E." are already CF objectives (CFN to be precise) and need no additional correction

This objective needs no additional correction from a tube lens or from the eyepieces. That makes it possible to fit it to microscopes of other makes, and in photomicrography it works in direct projection mode (it throws the image straight onto the camera sensor, with no relay optics needed).

This is the so-called black series of objectives, named after the black plastic barrel. They were used mainly in the Nikon Alphaphot YS2 microscope. That was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared for instance in the Leitz / Leica HM-LUX 3 microscope or in the Will Wetzlar V300 / V355 / V365 microscopes.

This objective fits practically any microscope of any make, provided it has an RMS thread and supports objectives with TL = 160 mm and parfocal lengths of 33 / 37 and 45 mm. A few such microscopes are listed in the "compatibility" section, but that list is not complete.

Description of this part for the microscope.

correction: achromatic
Model: E 40 0.65 160/0.17
Numerical aperture N.A.: 0.65
Cover glass: yes, 0.17 mm thick
Thread: RMS
Tube length: 160 mm
Parfocal length: 45 mm (long barrel objective)
Immersion: no
Operating mode: objectives marked "E." are already CF objectives (CFN to be precise) and need no additional correction

This objective needs no additional correction from a tube lens or from the eyepieces. That makes it possible to fit it to microscopes of other makes, and in photomicrography it works in direct projection mode (it throws the image straight onto the camera sensor, with no relay optics needed).

This is the so-called black series of objectives, named after the black plastic barrel. They were used mainly in the Nikon Alphaphot YS2 microscope. That was the period when manufacturers were experimenting with a new look for microscope parts, and exactly the same black series appeared for instance in the Leitz / Leica HM-LUX 3 microscope or in the Will Wetzlar V300 / V355 / V365 microscopes.

This objective fits practically any microscope of any make, provided it has an RMS thread and supports objectives with TL = 160 mm and parfocal lengths of 33 / 37 and 45 mm. A few such microscopes are listed in the "compatibility" section, but that list is not complete.