Home page of the microscope service parts, repair and spare parts online catalog - Sermik-Oplatek Mikroskopservice Dresden f.n.n.Z

Description of this part for the microscope.

ring that allows correction of the vision defect of one eye and proper adjustment of image sharpness. The right eyepiece prism is integrated together with the tube.

Basic parameters:
- Type: tube with diopter correction ring
- Supported eyepiece diameter: 23.2 mm
- Included: right eyepiece prism
- For head model: PZO MND-6, both for models with black and with white housing.

This repair part (service element / replacement part) comes from a binocular head PZO MND-6 which was originally mounted on the microscopes:
- PZO Biolar DIC
- PZO Biolar B

However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30

Additional information: the fluorescence microscope PZO Biolar FL was originally sold with a mono head (monocular head) - however the PZO MND6 head also fits this microscope model.

Hinweis - this tube with prism DOES NOT FIT heads that were originally sold with PZO Studar microscopes, even though these heads look very similar. Of course if a head from the Biolar model was mounted on a Studar microscope (because it fits), then this tube will be compatible, because it is a repair element for the HEAD and not for a specific microscope model.

Description of this part for the microscope.

This repair part (service element / replacement part) comes from a binocular head PZO MND-6 which was originally mounted on the microscopes:
- PZO Biolar DIC
- PZO Biolar B

However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30

Additional information: the fluorescence microscope PZO Biolar FL was originally sold with a mono head (monocular head) - however the PZO MND6 head also fits this microscope model.

Description of this part for the microscope.

Supported eyepiece diameter: 23.2 mm
- Included: left eyepiece prism
- For head model: PZO MND-6, both for models with black and with white housing.

This repair part (service element / replacement part) comes from a binocular head PZO MND-6 which was originally mounted on the microscopes:
- PZO Biolar DIC
- PZO Biolar B

However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30

Additional information: the fluorescence microscope PZO Biolar FL was originally sold with a mono head (monocular head) - however the PZO MND6 head also fits this microscope model.

Hinweis - this tube with prism DOES NOT FIT heads that were originally sold with PZO Studar microscopes, even though these heads look very similar. Of course if a head from the Biolar model was mounted on a Studar microscope (because it fits), then this tube will be compatible, because it is a repair element for the HEAD and not for a specific microscope model.

Description of this part for the microscope.

microscopes:
- PZO Biolar DIC
- PZO Biolar B

However, because the PZO MND-6 head has a standard mounting interface typical for PZO microscopes (that is a dovetail mount with a diameter of 43 mm), this head can also be found mounted on other PZO microscopes such as:
- Studar
- MB-30

This part may be the answer to the following problems:
- scratched PZO head housing
- how to paint a PZO head?
- how to replace a PZO head cover?
- dropped Biolar head
- dented Biolar PZO head housing

Description of this part for the microscope.

thread

Fits condensers:
- PZO KPI-2 (Pluta / Nomarski DIC)
- PZO K4Ph (phase contrast Ph, PhA, PhS, A)
- PZO K3Ph (phase contrast Ph, PhA, PhS, A)
- PZO K3Ph1 (phase contrast Ph, PhA, PhS, A)
- PZO KFL (phase contrast / darkfield for fluorescence)
- PZO KFF
- PZO K3Phz (variable phase contrast Phz)

This upper lens allows conversion of the mounting standard from PZO 39.5 mm to the 37 mm standard and the use of PZO condensers on many other microscopes, e.g. Olympus BH / CH-2 or Lomo MBB

This microscope element can solve the following issues:
- How to mount PZO DIC on a Lomo microscope?
- Can I install a PZO DIC KPI2 condenser on an Olympus CH-2 microscope?
- Can I use PZO phase contrast on my non-PZO microscope?
- Does PZO phase contrast or DIC work on a microscope with a 37 mm condenser mount?

Description of this part for the microscope.

10x
Correction: Achromat
Numerical aperture: 0.24
Tube length: 160 mm
Focal length: 45 mm
Cover glass: no
Immersion: no
Thread: RMS
Info: PI = polarization-interference objective (red ring).

Compatible with the following PZO condensers:
- PZO KPI 2
- slit condenser
PI objectives are among the components of the PZO UPI set (i.e. the so-called DIC).

VERY IMPORTANT: the marking on the objective is "PI" (in lowercase: "pi"), meaning [P]-polarization [I]-interference.
In many descriptions available on the Internet, you can find information that this is a PLAN objective. This is an ERROR caused by misinterpreting the marking as PL.

Note: another INCORRECT piece of information often found online is that these are DIC objectives. This is not true.
DIC according to Pluta (niem: DIC nach Pluta), sold by PZO, achieves the DIC effect (i.e. a 3D relief image) using standard achromatic PZO objectives (and not only those). Objectives marked PI with a red ring are not required for this.

It can be used with any microscope from any manufacturer that supports RMS objectives, TL=160 mm, FL=45 mm.

Description of this part for the microscope.

eyepieces can be used with microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.

Description of this part for the microscope.

microscopes from any manufacturer, as long as the microscope supports eyepieces with a mounting diameter of 23.2 mm.

Description of this part for the microscope.

condenser fits microscopes from many manufacturers (e.g. Lomo, Carl Zeiss Jena, Olympus and many others) with a condenser holder diameter of 37 mm.

Description of this part for the microscope.

diffuser)
- blue
- yellow
- green

New (usually Chinese) microscope filters are sometimes not even made of glass. And even if they are made of glass - you may encounter scandalous examples where the glass is only surface-colored. Unfortunately, cheap colored glass filters may not be internally homogeneous and can cause light refraction distortions.

This filter set by PZO was originally sold together with the PZO Biolar microscope. It was manufactured in the 1970s (and certainly before 1977), so these are optical glasses that are about half a century old! They have never been used until now (this is so-called NOS - New Old Stock), therefore these are excellent old-class optical glasses of the highest quality.

Filters with a 32 mm diameter are used - and can be used - in microscopes from various manufacturers:
- Carl Zeiss Jena
- Zeiss West Germany
- Eschenbach
- Meopta
- Nikon
- ROW
- Leitz Wetzlar
- Wild
- Hund
- Kosmos
- and many others

Important - popular microscopes by Lomo (for example Lomo Biolam) have a 33 mm filter holder, so the filters shown here have too small a diameter and may fall out from some Lomo holders.

Description of this part for the microscope.

PZO Biolar P (Pol)
- PZO Biolar FL (Fluorescence)

The function of this component is to reflect light coming from the microscope base vertically upward so that, after passing through the specimen slide and the objective, it reaches the eyepieces and ultimately the user's eyes.

This cast component bears the marking "AK11", and this designation is commonly used on the secondary market to identify this particular angle mirror. However, it is not a part number, because the marking "AK11" can also be found on other PZO microscope components, which may lead to confusion. It is very likely that the source of this confusion is the attempt to compare PZO metal components with those used in Carl Zeiss Jena microscopes, where cast parts are marked with numbers in the format "Si10 CZ xxxxx". This may incorrectly lead people to assume that PZO used a similar numbering system.

Replacement of the angle mirror in PZO Biolar microscopes may be necessary in the following situations:
- if the mirror has become heavily scratched due to improper cleaning (minor scratches are usually not visible during normal use)
- if the silver reflective coating of the installed mirror becomes oxidized
- if the mirror becomes damaged, chipped, or cracked, for example after coming loose from its mounting

Description of this part for the microscope.

intended for so-called "thick" objectives
Thread in the cap: no, the cap of this objective case does not contain a thread for attaching an RMS objective

This objective case can be used to store so-called "short" objectives (DIN 33 mm), longer objectives (DIN 37 mm), and long objectives (DIN 45 mm), provided they are not the so-called "thick" type.

For PZO objectives, it can accommodate all standard achromatic objectives as well as all phase contrast objectives. Some unusual PZO microscope objectives do not fit inside, for example the 100x PI objective (with a red ring).

Various names are used on the secondary market for a microscope objective case, including:
- objective case
- microscope objective case
- objective container
- microscope objective container
- objective storage case
- objective storage container
- objective box
- objective storage box
- protective objective case
- objective lens case
- objective lens container
- dust protection case
- transport case for microscope objectives
- microscope objective holder case
- storage canister for microscope objectives

Each case has the PZO logo on its cap. Caps may be black, white, or grey.

Although this case is of greatest interest to users and collectors of objectives made by the Polish manufacturer PZO, it can of course be used to store objectives from any manufacturer.

Description of this part for the microscope.

and serve two main purposes:
- they allow the user to comfortably rest their head against the eyepieces, reducing neck strain during prolonged microscope work (this is not possible with soft rubber eyecups)
- they block stray light entering from the sides, reducing reflections and improving image contrast

This offer includes 2 (two) pieces, i.e. one pair.

A few quick facts:
- these eyecups fit PZO eyepieces only
- these eyecups fit only PZO eyepieces with a mounting diameter of 23.2 mm
- these eyecups DO NOT FIT older PZO eyepieces with a knurled outer edge — an example of such eyepieces can be seen in the last gallery photograph
- the last gallery photograph shows an example of these eyecups installed on microscope eyepieces

Important: no dimensions are provided here. These eyecups fit only 23.2 mm microscope eyepieces manufactured by PZO (PZO Poland / PZO Warszawa). They do not fit microscope eyepieces made by other manufacturers. If a microscope made by another manufacturer (e.g. Lomo Biolam) uses PZO eyepieces, these eyecups will fit. If a PZO microscope (e.g. PZO Biolar) uses eyepieces made by another manufacturer (e.g. Carl Zeiss Jena), these eyecups will not fit even though the microscope itself is made by PZO. These eyecups fit the eyepieces — not a specific microscope.

Description of this part for the microscope.

small drops of adhesive.

The nameplate fits all microscopes of the Biolar series based on the PZO Biolar B stand:
- PZO Biolar B
- PZO Biolar DIC
- PZO Biolar FL
- PZO Biolar Pol
- and all other variants
All of these nameplates are identical and differ only by the serial number.

Important: this nameplate does NOT fit the microscopes currently (as of 2026) sold as the Biolar C. These are ordinary Chinese OEM microscopes with a "Biolar" sticker.

Several decades have passed since the PZO Biolar series microscopes were manufactured, and these nameplates often simply fall off by themselves.